MUSWAY MAE6.2T 20 MM 0.75 Inch Silk Dome Tweeters Instruction Manual
- June 13, 2024
- musway
Table of Contents
MAE6.2T
20 MM (0.75”) SILK DOME TWEETERS
Instruction Manual
INSTALLATION NOTES
The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker components carefully. Follow these suggestions to ensure proper imaging and maximum performance:
- Choose a location that offers the least amount of obstruction between the components and your ears. Pay also attention to the position of the seats, headrests and other constructional systems in the interior space of the car.
- Try to mount the speakers on the same arrangement. They should be installed at the same height and directly across from each other. Do not mount one speaker higher, lower, further forward or further backward from the opposite speaker.
- The tweeter should always be installed as close as possible to the speak- ers.
- Always take a look behind the chosen mounting locations to ensure that there is proper clearance for the rear of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.
- Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker deck. There should be no gaps between the speaker basket and the mounting surface
- Please handle the components with care, otherwise they will get damaged.
- Please pay attention to the correct polarity (+ or -) for all terminals and connections.
- Never connect the speakers to the electrical ground or with the body of the vehicle.
- If you have to dispose the device, please note that no electronic devices may be disposed in the household waste. Dispose the device in a suitable recycling facility in accordance with local waste regulations. If necessary, consult your local authority or your dealer.
SPECIFICATIONS
MAE6.2T
20 mm (0.75“) Tweeters
Silk Dome Neodymium Drivers
Impedance 4 Ohms
Frequency Range 3.200 – 24.000 Hz
12dB Cable Crossovers
Optionally with – 3dB attenuation
Dimensions Ø 36 x 19 mm
Angled Housing Ø 36 x 24 mm
Flush Mount Housing Ø 41 x 23 mm, Installation Depth 14 mm
Surface Mount Housing Ø 41 x 23 mm
MOUNTING OPTIONS
CONNECTION EXAMPLE
SPEAKER OUTPUTS AMPLIFIER
CAUTION:
Please only operate the tweeters with the enclosed cable crossovers.
Frequencies that are too low can permanently damage the tweeters.
MUSWAY is a brand of Audio Design GmbH
Am Breilingsweg 3 · D-76709 Kronau
Tel. +49 7253 – 9465-0 · Fax +49 7253 – 946510
© Audio Design GmbH, All Rights Reserved
www.musway.de
Documents / Resources
|
MUSWAY MAE6.2T 20 MM 0.75 Inch Silk Dome
Tweeters
[pdf] Instruction Manual
MAE6.2T 20 MM 0.75 Inch Silk Dome Tweeters, MAE6.2T, 20 MM 0.75 Inch Silk Dome
Tweeters, 0.75 Inch Silk Dome Tweeters, Silk Dome Tweeters, Dome Tweeters,
Tweeters
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>