musway MAE6.2C Component Speakers Instruction Manual

musway MAE6.2C Component Speakers

Product Information

The MAE Component Speakers is a 2-way component system designed for high- quality audio performance. They have an RMS power rating of 100 Watts and a maximum power rating of 200 Watts. The impedance is3 Ohms and the frequency range is 50 – 24000 Hz.

Product Usage Instructions

1. Thoroughly plan the installation of the speaker system. Choose a suitable location that offers the least amount of obstruction between the components and your ears. Consider the position of seats, headrests, and other constructional systems in the car’s interior space.
2. Mount the speakers in the same arrangement. Install them at the same height and directly across from each other. Avoid mounting one speaker higher, lower, further forward, or further backward from the opposite speaker.
3. Install the tweeter as close as possible to the speakers.
4. Check behind the chosen mounting locations to ensure proper clearance for the rear of the speakers. Avoid obstructions such as window tracks, wire harnesses, and gas tanks.
5. Securely mount the speaker to a door panel or rear speaker deck for maximum performance. Ensure there are no gaps between the speaker basket and the mounting surface.
6. Handle the components with care to avoid damage.
7. Pay attention to the correct polarity (+ or -) when connecting all terminals and connections.
8. Never connect the speakers to the electrical ground or to the body of the vehicle.
9. If you need to dispose of the device, do not dispose of it in household waste. Instead, take it to a suitable recycling facility in accordance with local waste regulations. Consult your local authority or dealer for more information.

INSTALLATION NOTES

The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker components carefully. Follow these suggestions to ensure proper imaging and maximum performance:

1. Choose a location that offers the least amount of obstruction between the components and your ears. Pay also attention to the position of the seats, headrests, and other constructional systems in the interior space of the car.
2. Try to mount the speakers on the same arrangement. They should be installed at the same height and directly across from each other. Do not mount one speaker higher, lower, further forward, or further backward from the opposite speaker.
3. The tweeter should always be installed as close as possible to the speakers.
4. Always take a look behind the chosen mounting locations to ensure that there is proper clearance for the rear of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank, etc.
5. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker deck. There should be no gaps between the speaker basket and the mounting surface
6. Please handle the components with care, otherwise, they will get damaged.
7. Please pay attention to the correct polarity (+ or -) for all terminals and connections.
8. Never connect the speakers to the electrical ground or to the body of the vehicle.
9. If you have to dispose of the device, please note that no electronic devices may be disposed of in the household waste. Dispose of the device in a suitable recycling facility in accordance with local waste regulations. If necessary, consult your local authority or your dealer.

SPECIFICATIONS

• 2-Way Component System
• Power Rating RMS 100 Watts
• Power Rating max. 200 Watts
• Impedance 3 Ohms
• Frequency Range 50 – 24000 Hz
• 16,5 cm (6.5“) Midbass Speakers
• Reinforced Paper Cones
• 25,5 mm Voice Coils
• 13,1 oz. / 369 g Neodymium Magnets (Y30)
• Installation Opening Ø 144 mm
• Installation Depth 67 mm
• 20 mm (0.75“) Tweeters
• Silk Dome Neodymium Drivers
• 12dB Cable Crossovers
• Optionally with – 3dB attenuation
• Dimensions Ø 36 x 19 mm
• Angled Housing Ø 36 x 24 mm
• Flush Mount Housing Ø 41 x 23 mm, Installation Depth 14 mm Surface Mount Housing Ø 41 x 23 mm
• MAE6.2W

Kickbass Speakers

• Power Rating RMS 100 Watts
• Power Rating max. 200 Watts
• Impedance 3 Ohms
• Frequency Range 50 – 5000 Hz
• Reinforced Paper Cones
• 25,5 mm Voice Coils
• 13,1 oz. / 369 g Neodymium Magnets (Y30)
• Installation Opening Ø 144 mm
• Installation Depth 67 mm

IMPORTANT
Please pay attention to the correct polarity (+ or -) for all terminals and connections.

TWEETER MOUNTING OPTIONS

MUSWAY is a brand of Audio Design GmbH Am Breilingsweg 3 · D-76709 Kronau
Tel. +49 7253 – 9465-0 · Fax +49 7253 – 946510 © Audio Design GmbH, All Rights Reserved www.musway.de

References

• Musway - Music is the Way

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>