iQ Wave IQWHS1 Home Speaker with Magsafe Wireless Charger User Manual
- June 13, 2024
- iQ Wave
Table of Contents
Home Speaker
with Magsafe Wireless Charging
IQWHS1 Home Speaker with Magsafe Wireless Charger
IQWHS1
USER MANUAL
What’s in the box
- i0 Wave Home Speaker
- USB Wall Charger
- USB Cable
- User Manual
Appearance
Connecting to Power Source
- Plug in the USB wall charger to a suitable power source in your home.
- Insert the wider USB-A end of the power cable into the matching port on the USB wall charger.
- Connect the slimmer Type-C end of the power cable to the matching port located on the lower back side of the IQ Wave Home Speaker.
Note. The included power supply must be connected at all times to use this device.
It is recommended to always use the supplied US wall charger and ypeC cable to power the 1Q lave Home Speaker. If you choose to use a different power supply the product may not function as intended. Minimum 20¥ of power is needed to power this product.
Power On/Off
Power On: Press and hold the Power Button for 2 seconds to power on the
speaker, the LED indicator lights will turn will flash red and white 3 times.
Power Off: Press and hold the Power Button for 2 seconds to power off the
speaker, the Bluetooth indicator light will turn off.
Connect with Bluetooth
- Turn on the speaker, the Bluetooth indicator light will start flashing
- 0n your device, search for the Bluetooth connection menu.
- Select IQWHS1 from the list. When connected correctly, the Bluetooth indicator light on the speaker will go solid.
Only one Bluetooth device can be connected at the same time f you want to connect another device to the speaker, then you must first disconnect the current one.
Disconnecting the Speaker
When it’s connected via Bluetooth, double press the Power Button to
disconnect.
Reconnecting the Speaker
Some Bluetooth devices support automatic reconnection, with those devices the
speaker will automatically reconnect. When it’s not connected, double press
the Power Button to connect to the last disconnected device.
Siri/Google Assistant
- Press and hold the Play/Pause Button for 2 seconds to activate Siri/Google Assistant.
Phone Calls
- Short press the Play/Pause Button to answer an incoming call and to end an ongoing cal.
- Press and hold the Play/Pause Button for 2 seconds to Reject an incoming call.
Volume
When listening to music:
- Short press the Volume Up/Next Button to increase volume
- Short press the Volume Down/Previous Button to decrease volume
Music
- Short Press the Play/Pause Button to play and pause music
- When listening to music:
– Press and hold the Volume Up/Next Button to go to the next song
– Press and hold the Volume Down/Previous Button to go to the previous song
Reset Function
lf you are having trouble connecting to the speaker you can press the Power
Button for 8 seconds to automatically reset.
Then proceed with the initial Bluetooth pairing steps to repair your device to
the speaker
Automatic Turn Off Function
The speaker will automatically turn off in 30 minutes when Bluetooth is not
connected and no music is playing.
Customer Service:
For more information or service contact our Customer Service Department.
E-mail [email protected]
Phone 905-513-7733
Distributed in Canada by Gentec International
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.