SURFOU MN9 Wireless Doorbell User Guide
- June 13, 2024
- SURFOU
Table of Contents
SURFOU MN9 Wireless Doorbell
**Product Features
**
- 55 Ringtones
- Learning Code Memory Function
- 5-Level Volume
- Long Range in Open Areas
- Outdoor Waterproof Transmitter
Specifications
Working Temperature
| -30℃ to +70℃
---|---
Receiver Voltage| AC 110-260V (wide voltage)
Transmitter Battery| 1x 23A 12V battery (included)
How to Change the Battery?
Insert the micro screwdriver at a 45° angle into the small opening at the bottom of the transmitter, and turning it once then pry open the cover.
How to Use?
Receiver
Plug the receiver into a socket and switch the socket on.
Transmitter
When the gate is closed, accurately place the transmitter in the position
where you intend to fix it, and confirm that the receiver still makes a sound
when you press the transmitter button. If the doorbell receiver doesn’t ring,
you may need to adjust the positions of the transmitter or receiver.
How to Clear and Reset?
Press and hold the receiver for about 5 seconds until you hear a ‘ding’ sound from the receiver accompanied by LED light flashing. This indicates that the set ringtone and paired transmitter/receiver will be cleared. When you press the transmitter button again, only the first transmitter will automatically pair with the receiver. Other transmitters will need to be paired again.
How to Pair
How to Change Ringtones?
- Short Press the Backward Button or Forward Button on the receiver to select your favorite music. The receiver will ring the selected music.
- Long Press the Volume Button on the receiver for about 8s, until it makes One Ding sound with LED light flashing one time.
- Quickly press the button on the transmitter within 8s, then the receiver will emit Two Ding sound with LED light flashing twice.
The setting is completed. This learning mode lasts only 8s, then it will
automatically exit.
Remark: This method is suitable for changing ringtone, adding the new
transmitters or receivers, and rematch.
Download 55 Song List
Get Support
https://www.surfou.com/support/
service@surfou.com
If you have any technical questions please contact.
Thanks for choosing SURFOU!
Information
Manufacture: Shenzhen Nurbenn Technology Co, Ltd.
Address: Room 302, Building A5, No. 43, Tangjia road, Tangjia Village,
Fenghuang street, Guangming district, Shenzhen city
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>