ANTTEQ 24S2 LED Monitor User Manual

ANTTEQ 24S2 LED Monitor User Manual

Safety Prevention Measures

Please always place this device on a stable surface; otherwise, it may fall and be damaged

The altitude and the tropical environment the adapter fits depend on which adapter is used for the device. The rating plate on the back of the device with the above warning sign indicates that this product is applicable for the safe use of the region with altitude of 2,000m and below

Do not hold the plug with wet hand; otherwise, electric shock may occur. Make sure the plug has a good touch because poor touch may cause fire.

Do not use a broken power plug nor keep power cord near heat source; otherwise, electric shock or fire may occur.

When cleaning the device, be sure to remove the power plug, use a piece of soft cloth rather than industrial chemical to clean the device, be sure not to let water enter the device.

Do not disassemble this device without permission. In case of failure, be sure to contact a professional servicing person to fix it. The unauthorized disassembly of this device may result in electric shock or fire.

In case of rare smell or noise out of this device, be sure to immediately cut off the power supply and ask a professional servicing person to fix the problem.

When this device is idle for long time, be sure to power it off; otherwise, electric shock or fire may occur.

Note:

The device with AC switch may use such AC switch as cut-off component.  The device without AC switch may use power plug or coupler as cut-off component. In case of the normal use of the equipment, make sure the cut-off component can be accessed easily.

HIGH-DEFINITION MULTIMEDIA INTERFACE

This product incorporates HDMI technology. HDMI, the HDMI logo, and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Installation Instructions

Accessories

• Power adapter

• Signal cable

• User manual

• Base/Stand

• stand neck

• Warranty card

(The above pictures are for illustration only and the physical accessories shall govern.)

Angle Adjustment

The screen can be adjusted by inclining forward and backward; however, the specific adjustment depends on the specific model of the device. Generally, it may be inclined 5±2° forward and 15±2° backward.

When adjusting the angle of the monitor, be sure not to touch or press the area of the screen.

(The above pictures are for illustration only and the physical accessories shall govern.)

Connect the Monitor to PC

Before connecting the LCD monitor to the PC, please power down the PC and the monitor.

Power adapter

Warning: Always use the power cord of standard configuration.

1. HDMI Port
   Connect the HDMI cable into the HDMI IN port into the back of the monitor (this needs the support of the monitor).
   

2. VGA Port
   Connect the VGA cable into the VGA IN port in the back of the monitor (this needs the support of the monitor).
   

3. Audio Interface
   Connect the AUDIO cable to the AUDIO OUT port in the back of the display (this needs the support of the monitor).
   

4. Power Plug
   Connect the power cord of the monitor into the POWER port in the back of the monitor.

User Setup

1. Schematic Diagram of Keys
   

2. Description of Keys’ Functions
   1| M| Pops up the menu/Backs to the previous menu (in case of main menu, exits from the whole menu).
   ---|---|---
   2| | When the menu opens, the value is incremented as the right function selection key, When the menu is closed, go to situational mode switch.
   3| | When the menu opens, the progress bar value is decremented as the left function selects the key.
   4| E| When the menu is activated, press this key to select the function, When the menu closes, pressing this button will enter automatic adjustment.
   5| | Power switch: Powers on/off the monitor.
   6| LED indicator light| Long bright: normal boot state; flicker: power saving standby state.

Note: The physical keys of the specific model shall govern.

Operation Menu (OSD) Function Descriptions

First level
menu item| First level
menu icon| Second level
menu item| Second
level
menu icon| Third level
menu item| Thirdlevel
menu icon| Description|
---|---|---|---|---|---|---|---
Display| | Brightness| | NONE| NONE| Adjust display brightness|
Contrast| | NONE| NONE| Adjust display contrast|
| | On| | Activate dynamic contrast|
Off| | Inactive dynamic contrast|
Return| | Return to the previous menu|
Exit| | Exit from the whole menu|
Language| | NONE| NONE| English| English| English|
Francoise| FINNS°| Francoise|
Espanola| Espanola| Espanola|
Deutsch| Deutsch| Deutsch|
Italian| Italian| Italian|
Portuguese| Paduguie| Portuguese|
Nederland’s| Nederland’s| Nederland’s|
Return| | Rerum to the previous menu|
Exit| | Exit from the whole menu|
Over
driver| | NONE| NONE| On| | Activate OD function(this needs the support of the monitor)|
Off| | Isnuaoctpoivrtatoef 0 jai function(this needs the|
Return| | Return to the previous menu|
Exit| | Exit from the whole menu|
Mode| | Standard| | NONE| NONE| Normal work mode|
Movie| | NONE| NONE| Movie mode|
FPS| | NONE| NONE| FPS game mode|
RTS| | NONE| NONE| RTS game mode|
EyeSaver| | NONE| NONE| Eye protection ray filter application mode|
Return| | NONE| NONE| Return to the previous menu|
Exit| | NONE| NONE| Exit from the whole menu|
Color Temp.| | Cool| | NONE| NONE| Set as cold color temperature|
Warm| | NONE| NONE| Set as wan color temperature|
User| | Red| R| R| Fine tuning of red color temperature|
Green| G| Fine tuning of green color temperature|
Blue| f B| Fine tuning of blue color temperature|
Return| | NONE| NONE| Return to the previous menu|
Exit| | NONE| NONE| Exit from the whole menu|

Note: The functions may be adjusted due to specific model or the upgrade of software version. The physical model shall govern

• Check if the power is on.
• Check if the power cord is connected.

Impossible plug-and-play|

• Check if the function of plug-and-play of the device is compatible with PC.
• Check if the display card is compatible with the plug-and-play function.·
• Check if the signal line 15 pin d joint bent

Dimming picture|

• Adjust brightness and contrast.

Flickering picture or picture with ripples|

• There may be electrical appliances or equipment with electronic disturbance.

The power indicator light is on (flickering), but the monitor has no pictures.|

• Check if the PC power is on.
• Check if the PC display card is inserted properly.·      Check if the signal cable of the monitor is correctly connected with the PC
• Check the signal cable plug of the monitor and make sure every pin has no bending.
• Observe the indicator light by pressing the Caps Lock key on the PC keyboard and check if the PC is working.

Color shortage(red, green and blue)|

• Check the signal cable of the monitor and make sure every pin has no bending.

Picture with cobr difference (white looks not white)|

• Adjust RGB color or reselect color temperature.

Screen font blur under VGA signal|

• Select the “E” to automatically adjust the image.

Screen color error under VGA signal|

• Select “Auto color” in OSD to correct under the white output screen.

Product Specifications

Diagonal dimensions| Picture aspect ratio| Picture dimensions (mm)| Dot distance (mm)| Optimal resolution
---|---|---|---|---
47cm(18.5″)| 16:9| 409.81‘230.4| 0.3| 1366768@60Hz
48.3cm(19″)| 16:10| 408.2255.2| 0.283| 1440900@60Hz
49.5cm(19.5″)| 16:9| 433.9236| 0.27| 1600900@60Hz
49.5cm(19.5″)| 16:9| 434235.8| 0.317| 1360768@60Hz
49.6cm(19.53″)| 16:9| 434.88238.68| 0.22| 19201080@60Hz
55cm(21.5″FHD)| 16:9| 476.64268.11| 0.248| 19201080@60Hz
58.4cm(23″)| 16:9| 509.2286.4| 0.265| 19201080@60Hz
60cm(23.6″)| 16:9| 521.3293.2| 0.271| 19201080@60Hz
60.45cm(23.8″)| 16:9| 527.04296.46| 0.2745| 19201080@60Hz
Ambient temperature| Storage temperature| -20°C to 60°C
Working temperature| 0°C to 40°C
Humidity| RH for operation| 20% to 80%

Remark: When the resolution are 25601440@60Hz/34401440@60Hz/ 19201080@144Hz/25601440@144Hz/3840*2160@30Hz connection via DVI port, pls choose 24+1 pin double-channel DVI cables.

Note: The actual application of the above parameters shall be subject to the specific model.

Table of Product Preset Modes

Preset resolution/Refresh rate

Displayimensions
d| Aspect ratio| 720×400
(70Hz)| 640×480
(60/75/
72.8Hz)| 800×600
(60/72
/75Hz)| 1024×768
(60/70
/75Hz)| 1280×1024
(60/75Hz)| 1366×768
(60Hz)| 1440×900
(60Hz)| 1600×900
(60Hz)| 1680×1050
(60Hz)| 1920×1080
(60Hz)
18.5″| 16:9| 0| 0| 0| 0| X| 0| X| X| X| X
19″| 16:10| 0| 0| 0| 0| 0| X| 0| X| X| X
19.5″| 16:9| 0| 0| 0| 0| X| X| X| 0| X| X
19.5″| 16:9| 0| 0| 0| 0| X| 0| X| X| X| X
19.53″/21.5″/23″/23.6″/23.8″| 16:9| 0| 0| 0| 0| 0| X| 0| X| 0| 0

Note: “O” indicates the corresponding resolution/refresh rate is supported. “X” indicates the corresponding resolution/refresh rate is not supported.

Note: The actual application of the above parameters shall be subject to the specific model.

All specifications and informations are subject to change without notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>