Agero A6/S6 Towing And Roadside Information Installation Guide
- June 13, 2024
- Agero
Table of Contents
Agero A6/S6 Towing And Roadside Information
Product Information
The 2019 Audi A6/S6 is a luxury sedan designed for a comfortable and stylish driving experience. It comes equipped with various features and tools to enhance your driving experience and provide convenience in different situations.
Towing & Roadside Information
When towing or in need of roadside assistance, it is important to follow the best practices and procedures provided by Audi. The user manual contains detailed instructions on how to handle thesesituations safely and effectively.
Jack Tool Kit
The Audi A6/S6 comes with a jack tool kit that is essential for lifting the vehicle during tire changes or repairs. The kit includes all the necessary tools required to operate the jack effectively.
Tool Kit Contents:
- Jack
- Lug Bolt Removal Tool
- Slide-out Red Locking Clip
- Retainer Nut
- Tow Eyelet Tool
- Park Override Tool
- Positive Lug
- Ground Lug
The tool kit is securely retained with a velcro strap to ensure easy access and storage.
Towing Eyelet
For front towing purposes, the Audi A6/S6 has a front eyelet cover that can be removed to expose the towing eyelet. It is located on the left side of the front bumper. However, there is no rear eyelet available.
Subwoofer Removal
If you need to remove the subwoofer, follow these steps:
- Take note of the orientation arrow for reinstallation.
- Slide out the red locking clip to unlock.
- Unplug the subwoofer by disconnecting the plug.
- Spin off the retainer nut to remove the subwoofer.
Park Override Tool
The park override tool is included in the tool kit and is used to manually override the park lock mechanism in case of emergencies or when the vehicle cannot be shifted out of park.
Jump Start Procedure
In case of a dead battery, you can jump-start the Audi A6/S6 using the ground lug. Please refer to the user manual for detailed instructions on how to safely perform a jump start.
INSTALLATION INSTRUCTION
-
The subwoofer will need to be removed
-
Unplug the subwoofer, and spin off the retainer nut to remove
-
The tool kit is retained with a velcro strap
-
Tool Kit and Park Override Tool
-
On the front bumper, press the left side of the front eyelet cover to remove.
There is no rear eyelet
-
Jump start procedure
© 2023 Agero, Inc. All Rights Reserved. 400 River’s Edge Drive, Medford, MA 02155