FISHER PAYKEL ADDW60PX Dishwasher Home Appliance Installation Guide
- June 13, 2024
- Fisher & Paykel
Table of Contents
INSTALLATION GUIDE
Accessory door panels
SAFETY & WARNINGS
WARNING!
****Electric Shock Hazard
Failure to follow this advice may result in electrical shock or death.
- Read and follow the safety and warnings before operating this appliance.
WARNING!
Cut Hazard
Failure to use caution could result in injury.
- Take care: some edges may be sharp.
- Ensure a 2mm minimum ventilation gap below the door is maintained.
- Ensure all packaging is removed and disposed of responsibly.
COMPONENTS REQUIRED
Supplied with appliance
| Supplied with door kit | Not supplied |
|---|
PRODUCT DIMENSIONS
| Height (mm)
---|---
Standard door panel| 717
Standard dishwasher| 820
Tall door panel| 759
Tall dishwasher| 857
For more information, visit www.fisherpaykel.com
Install handle as per handle installation guidance.
Secure the sliding bracket and top as shown with 4 x 13mm screws.
Ensure ratchet is correctly oriented, allowing the door tobe adjusted freely.
Remove the four screws along the top of the inner door.
Remove the four screws on the sides of the inner door.
Hang door panel.
Align door panel by sliding the accessory door until the top of the door panel sits above the top of the control panel.
Secure door panel by replacing 4 screws along the top edge of inner door with M3 x 31mm screws.
Secure door panel by replacing 4 screws along the sides with 3.9 x 38mm screws.
Cut the exit vent as shown.
A tall product with a standard size door panel should be cut at line 2.
All other configurations can be cut at line 7.
Slot the exit vent into the product and secure using two 3.5 x 11mm screws.
Check door balance. Refer to installation guide for details.
431192B 10.23 NZ AU UK IE
Documents / Resources
|
FISHER PAYKEL ADDW60PX Dishwasher Home
Appliance
[pdf] Installation Guide
ADDW60PX Dishwasher Home Appliance, ADDW60PX, Dishwasher Home Appliance, Home
Appliance, Appliance
---|---