GENERALSCAN GSR3520 Wearable Barcode Scanner User Guide

June 6, 2024
GENERALSCAN

QUICK USER GUIDE GS R3520 / GS R3521 / GS R3522

Introduction

This Guide is applicable to GS R3520/GS R3521/GS R3522 Scanners. For detailed information please refer to this Guide. If there are any further questions, please contact support@generalscan.cloud.
Copyright
GENERALSCAN trademarks are registered in many jurisdictions around the world. GENERALSCAN Electronics Ca, Ltd or its subsidiaries, all rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing. The material in this manual is subject to change without notice. All software without a license shall not be transferred to others.
Laser Safety
Do na stare into the laser beam or view directly with optical instruments.
`` Product Setup – Assemble the Trigger
Figure 2 Assemble the Trigger
Push the other end down until it snaps into place

More Language
This Guide is written in English Please scan the below barcodes with your phone to get access to other languages.

Battery Safety

  • Do not immerse or expose to water or other liquids, or expose to fire. explosion or another hazard.
  • Do not disassemble or open crush. bend or deform. puncture, or shred.
  • Do not shit circuit a battery an eon metallic or conductive objects to contact the battery terminals.
  • Do not use the battery if it is bilging. deformed or damaged.
  • To charge the mobile device battery the battery and charger temperatures must be between +32oF and +104 of (0 tiC and +40 oC).
  • Do not use batteries other than those provided by GENERAL SCAN. otherwise, we will not be responsible for the consequences.
  • Dispose of batteries according to instructions.
  • Please follow local regulations to promptly depose of used recharge. able batteries.

GS R3520/GS R3521/GS R3522 Models

Standard Package Contents

Standard package content

  1. Scanner Body
  2. Battery x2
  3. Strap
  4. Trigger
  5. Type-C Cable
  6. Battery Charger
  7. Quick User Guide
  8. Quick Configuration Manual
  • Standard Package includes 2 batteries and 1 battery charger. The 2 batteries could be 2 x 400mAh or 2 x 600mAh.
  • Simplified Package includes 1 x 400mAh or 1 x 600mAh and does not have a battery charger.

Product overview

Product Setup – Install the Trigger

Product Setup – Assmble the Trigger

Product Setup – Install the Battery
Figure 3 Install the Battery
Insert the tabs on the battery into the gaps.

Product Setup – Assemble the Battery
Figure 4 Assemble the Battery
Place the battery in the battery compartment

Removing the Battery
To remove the battery, please push the release latch on the back of the scanner to the left, then remove the battery with the tabs on the right and left of the battery.

Turn ON/OFF
Turn ON the scanner after pressing and holding the scanner’s trigger button for 1.5 seconds. Turn OFF the scanner after pressing and holding the scanner’s Digger button for 5 seconds.
Battery Charging
Please use the cade packed in the box. Place the battery in the charger as follows. Align the end of the battery-T on the charger. Pull out the retractor-O. Push the other Enda; into the compartment. Then connect the charger to the computer.
Scanning Techniques
Please aim at the middle of the barcode through the red light when scan the barcode. Please scan properly in accordance with the following diagram. Adjust the scanner angle and distance slowly, at the same time, press the trigger button, make the center red light cover the left to right of the barcode

LED Status

Status Description

Green LED blinks one time| Decode successfully
Green LED is blinking continuously| Low battery alarm
Red LED turns on| Charging
Red LED turns off| Charging 100%
Blue LED is blinking continuously| Start Bluetooth pairing
Blue LED turns off| Bluetooth pairing successfully

Bluetooth HID Mode, a Bluetooth Keyboard, is one of the most commonly used modes. The data will be output after the cursor.

Step 1.
First, please scan the ” Bluetooth HID Mode ” barcode below.

The blue LED of your Barcode Scanner is blinking. This means that the device is in pairing mode (HID mode).
Step 2.
Turn on the Bluetooth of your Mobile Phone.

Step 3.
Choose the correct device.

Connection has been completed, the blue light of the device has turned off, which means the connection is successful.
Step 4.
Please open a notebook app on your phone, when you scan a barcode the data will appear at the tip of the cursor. The barcode below is the test barcodes a

Specification

| GS R3S20| GS R3521| GS R3522
---|---|---|---
Battery Capacity| Standard Battery
400mAh| Extended Battery
600mAh| Standard Battery
400mAh| Extended Battery
600mAh| Standard Battery
400mAh| Extended Battery
600mAh
Battery Life| 9.6 Hours| 14.3 Hours| 7.5 Hours| 10.6 Hours| 8 Hours| 12 Hours
Engine Option| Zebra SE2707| Zebra SE4107| Honeywell N4680
Illumination| 1 Hyper red 660nm LED| 1 warm white LED| Warm White LED with CCT 3000K
Charging| 5V 1A
Bluetooth| HID Keyboard, SPP, and Bluetooth low energy (BLE)
USB| USB HID Keyboard, USB VCP (Virtual Serial Port)
Supported Systems| Windows, Android, Android Wear, Linux, iOS, macOS

GS R3S20 GS R3521 GS R3522 Battery Capacity Standard Battery 400mAh Extended Battery 600mAh Standard Battery 400mAh Extended Battery 600mAh Standard Battery 400mAh Extended Battery 600mAh Battery Life 9.6 Hours 14.3 Hours 7.5 Hours 10.6 Hours 8 Hours 12 Hours Engine Option Zebra SE2707 Zebra SE4107 Honeywell N4680 Illumination 1 Hyper red 660nm LED 1 warm white LED with CCT 3000K Charging 5V–.1A Bluetooth HID Keyboard, SPP and Bluetooth low energy (BLE) USB USB HID Keyboard, USB VCP (Virtual Serial Port) Supported Systems Windows, Android, Android Wear, Linux, iOS, macOS

| |
---|---|---
https://www.generalscan.com/gservice| https://play.google.com/store/apps/details?id=com.generalscan.icode&hl=tr&gl=US| https://play.google.com/store/apps/details?id=com.generalscan.android.gskeyboard&hl=tr&gl=US

Bluetooth Connection / BLE Mode
The Bluetooth BLE Mode is a Low Energy Protocol after the Bluetooth 4.0 Protocol. You need BLE software for data transmission and also for sending commands to the Scanner. We provide Android Keyboard Pro App to help you convert BLE data into Keyboard data, which output data after the cursor and send commands.
Step 1. Please scan the Bluetooth BLE Mode barcode.
The blue LED of your scanner is 2 fast and 1 slow blinking. This means that the device is in pairing mode (BLE mode).
Step 2. Please open the application and ‘Turn on Bluetooth” then please change the keyboard with Generals can Keyboard.

Bluetooth Connection / SPP Mode
The Bluetooth SPP Mode is a Bluetooth Serial Port. You need Bluetooth Serial Port software for data transmission, and for sending commands to the scanner. We provide Android Keyboard Pro App to help you convert serial data into Keyboard data, which output data after the cursor and send commands.
Step 1.
Please scan the Bluetooth SPP Mode barcode.
The blue LED of your scanner is slow blinking. This means that the device is in pairing mode (SPP mode).
Step 2.
Please open the application and ‘Turn on Bluetooth ‘ then please change the keyboard with Gene-ralscan Keyboard.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Product name: Wearable Barcode Scanner
Product model: GS R3520
Manufacturer: Tianjin Zhan Rui Si Ken Technology Co., LTD
Address: Room A-1, Unit A,4/F, building C1, Xinmao Science and Technology Park, HuaYuan Industrial
Zone, Binhai High Tech Zone, Tianjin, China
Contact Person: Sheng Wang Email: bryant@generalscan.cn Tel: +86 022 58171186
Frequency Range: 2402-2480MHz
Max. output Power: BDR&EDR:1.72 dbm BLE:0.6dbm
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be
provided as follows:
Hereby, Tianjin Zhan Rui Si Ken Technology Co., LTD declares that radio equipment type Wearable Barcode
Scanner (GS R3520) is in compliance with Directive 2014/53/EU, and this product is allowed to be used in all EU member states.
The full text of the EU declaration of conformity is available at following
This product can be used across EU member states.
BATTERY Warning:CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS
European representative: Optidev AB
address:Kyrkogårdsgatan 11 BORAAS 50430 Sweden

https://www.generalscan.com/warranty
Warranty Information
For Generalscan products warranty information, please visit www.generalscan.com/warranty.
https://www.generalscan.com/services
Service Information
If there is any problem with GENERALSCAN barcode scanners, please visit our service page, www.generalscan.com/service.
USER GUIDE FOR R SERIES
Email: Support©generalscancloud
©2021 GENERALSCAN All rights reserved.
USER GUIDE FOR R SERIES
Version 11

Documents / Resources

| GENERALSCAN GSR3520 Wearable Barcode Scanner [pdf] User Guide
GSR3520, 2A39T-GSR3520, 2A39TGSR3520, GSR3520, GSR3521, GSR3522, GSR3520 Wearable Barcode Scanner, Wearable Barcode Scanner, Barcode Scanner
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals