MiPRO MP-80 Rechargeable Transmitter Two Slot Charging Station User Guide

**MiPRO MP-80 Rechargeable Transmitter Two Slot Charging Station User Guide

**

MP-80
Rechargeable Transmitter Two-Slot Charging Station User Guide

Profile

1. The MP-80 is a charging station designed exclusively for MIPRO rechargeable transmitters. Each station has two charging slots. Each slot has a 3-in-1 charging design, enabling multiple charging options:
   (A) Two handheld transmitters
   (B) Two bodypack transmitters
   (C) Two ICR18500 lithium bateries
   (D) One handheld & one bodypack transmitter
   (E) One handheld transmitter & one ICR18500
   (F) One bodypack transmitter & one ICR18500

2. Each station also provides two storage slots. for 2 spare ICR18500 lithium batteries. Precise charging status with red (charging) & green (charged) indicators for easy reading by the users. Multiple charging stations can be easily connected for more charging options.

Part Names

Rear Panel

Front Panel

1. Screw Holes
2. DC Power Jack: center electrode connected to the positive voltage.
3. Charging Slots
4. Multiple Chargers Connecting Points
5. Lithium Battery Storage Slots
6. Power Indicator
7. Charging Indicator
8. Bottom Screw Holes
9. Charged Indicator

Charging Methods

1. 2 Handhelds

2. 2 Bodypacks.

3. 2 ICr 18500.

4. 1 Bodypack
   1 R18500,

5. 1 Handheld
   1 Bodypack.

6. 1 Handheld
   1 ICR18500.

7. 2 ICR1800 Storage.

Charging Instructions

1. Connect the included power adaptor to the. DC power input jack and the power indicator 6 is lit. Red indicator 7 denotes charging status. Green charged indicator 9 denotes charged status.

(Al Pictures shown are for illustration purpose only)

2. Be sure to use the included MIPRO charger o avoid inadequate voltage or current. Ensure input supply voltage must not exceed a specified value to avoid damages to the charging station, rechargeable batteries and transmitters. MIPRO power supply has switching power output 12V/1A.
3. Power off the transmitter before charging,
4. Do not use other brands’ charging station to avoid possible danger.
5. Please Note: MIPRO assumes no liability for problems that occur when the Notes and Precautions for use listed above are not followed,

Multiple charging stations

1. Align connecting plates between two charging stations.

2. Fasten screws for a fixed dual charging stations.

3. Dual charging stations complete.

4. Multiple charging stations can be easily connected for more charging options.

5. Fasten two screws into the two bottom slots will stabilize & fix MP-80 firmly onto a table top.

Notes
Refer to actual product in the event of product description discrepancy.

MICROPHONE PROFESSIONALS

All rights reserved. Do not copy or forward without prior approvals of MIPRO. Specifications and design subject to change without notice. YM 022/05

MIPRO Electronics Co., Ltd

Headquarters: No. 814, Beigang Rd., Chiayi City 600079, Taiwan
Tel: +886.5.238.0809
www.mipro.com.tw
Fax: +886.5.238.0803
[email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>