dyson WP01001 Active Noise Cancelling Audio Joystick User Manual

dyson WP01001 Active Noise Cancelling Audio Joystick

Product Information

The Dyson ZoneTM air-purifying headphones are a revolutionary product designed to provide a clean and immersive audio experience. These headphones come with advanced features such as active noise cancelling, audio joystick control, and LED indicators. The headphones also include a visor and face coverings for added protection.

Package Contents

• Dyson ZoneTM air-purifying headphones
• ‘Quarter Turn’ hard case
• Community face covering
• FFP2 Community face covering
• Electrostatic carbon filters (2 or 4, depending on the model)
• USB-C cable
• Visor cleaning brush
• Visor sleeve
• In-flight adaptor kit (optional)
• Soft pouch (optional)

Note: Some accessories may not be included in the package. Additional accessories can be purchased separately on the Dyson website.

MyDysonTM App
To enhance your experience with the Dyson ZoneTM air-purifying headphones, you can download the MyDysonTM app from the App Store or Google Play. This app allows you to access additional features and customize your headphone settings. Follow the on-screen instructions in the app to create a new account.

Product Usage Instructions

1. Assembling your headphones

   • Take out the Dyson ZoneTM air-purifying headphones from the package.
   • Attach the face coverings onto the headphones as per the provided instructions.
   • Place the electrostatic carbon filters into the designated slots on the headphones.

2. Fitting the face coverings

   • Adjust the face coverings to fit comfortably over your face.
   • Ensure a secure fit by adjusting the straps or fasteners.

3. Pairing your headphones

   • Turn on your device’s Bluetooth.
   • Put the Dyson ZoneTM air-purifying headphones in pairing mode by following the instructions in the user manual.
   • On your device, search for available Bluetooth devices and select the headphones from the list.
   • Once connected, you are ready to use the headphones wirelessly.

4. Charging your headphones

   • Connect the USB-C cable to the charging port on the headphones.
   • Plug the other end of the cable into a power source, such as a computer or wall adapter.
   • Allow the headphones to charge until the battery is fully replenished.

5. Using audio

   • Access the audio joystick located at the back center of the right ear cup to control volume, playback, and other audio functions.
   • Adjust the settings through the MyDysonTM app for a personalized audio experience.

6. Active noise cancelling
   

   • The Dyson ZoneTM air-purifying headphones feature active noise-canceling technology to minimize external sounds and provide a more immersive listening experience. Activate or adjust this feature through the audio joystick or MyDysonTM app.

7. In-flight adaptor
   

   • If you plan to use the headphones during air travel, you can use the provided in-flight adaptor kit to connect to the airplane’s audio system. Follow the instructions in the user manual to properly connect the adaptor.

8. Changing your filters
   

   • Over time, the electrostatic carbon filters may need replacement to maintain optimal air purification. Refer to the user manual for detailed instructions on how to replace the filters.

9. Cleaning your headphones

   • Before cleaning, ensure that the headphones are disconnected from any power source.
   • Use a soft, dry cloth to gently wipe the exterior surfaces of the headphones.
   • Avoid using liquid cleaners or submerging the headphones in water.

10. Reassembling your headphones
    

    • If you have disassembled the headphones for cleaning or other purposes, follow the user manual instructions to reassemble them correctly.

11. Cleaning your community face-covering
    

    • Refer to the user manual for specific cleaning instructions for the Community face coverings.

12. Replaceable FFP2 Community face covering
    The FFP2 Community face covering provided with the headphones is replaceable. Refer to the user manual for instructions on how to replace it when needed.

In the box

Some accessories may not be included. You can buy additional accessories at www.dyson.com. Download the MyDyson™ app

• An essential part of your experience, the
• MyDyson™ app lets you control your Dyson Zone™ air-purifying headphones – wherever you are.
• If you haven’t already, download the app now for extra features and the latest updates.
• Download the MyDyson™ app from the App Store or Google Play.
• Open the app and follow the on-screen instructions to create a new account.
• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of
• Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

In the box

Download the MyDyson™ app

• An essential part of your experience, the
• MyDyson™ app lets you control your Dyson Zone™ air-purifying headphones – wherever you are.
• If you haven’t already, download the app now for extra features and the latest updates.
• Download the MyDyson™ app from the App Store or Google Play.
• Open the app and follow the on-screen instructions to create a new account.
• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of
• Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

Getting started

Assembling your headphones

Insert your filters

• Twist off both ear cup covers, anti-clockwise.
• Hold the filters on the plastic edges and secure them into the ear cups.
• Replace the covers and twist them clockwise to secure into position.

Adjust your headphones

• Put your headphones on.
• Adjust the headband, sliding both sides until you have a comfortable fit.

Attach visor

• Remove any packaging from the
• visor and fully extend the visor arms.
• With the visor positioned below your mouth, attach it to each ear cup with the magnetic connectors.
• Push the visor up to cover your nose and mouth.

Adjust visor

• Adjust the visor until it’s in a comfortable position, close to – but not touching – your face. The airflow will start automatically.

Fitting the face coverings

• Reusable Community.
• Replaceable FFP2 Community.
• These can be re-ordered from www.dyson.com.

Remove visor

• Detach the magnetic connection from the bottom of both ear cups.

Fit the face covering

• Push the face covering into position inside your visor, making sure it’s attached to both the top and bottom.

Attach visor

• With the visor positioned below your mouth, attach it to each ear cup with the magnetic connectors.
• Lift the visor up to cover your nose and mouth.
• Adjust it until it’s approximately one centimetre away from your nose.

Pairing your headphones

Connecting to the MyDyson™ app

• Download the MyDyson™ app from the App Store or Google Play. Open the app and follow the on-screen instructions to create a new account.
• If you already have an account, select
• ‘Add machine’ and follow the instructions.
• Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of
• Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.

Turn on your headphones

• Press and hold the Airflow button on your left ear cup to turn on the power. The LED light will turn white.
• You can turn them off by holding down the airflow button for 5 seconds when you are not using them.
• Holding it down for a further 5-10 seconds will reset your headphones.
• Pair your headphones
• Press and hold the airflow button until the LED light starts to pulse blue.
• Your MyDyson™ app will alert you when pairing is complete.

Connect audio using Bluetooth®

• Open Bluetooth® in your mobile device’s settings menu. Check that Bluetooth® is turned on and select your Dyson Zone™ headphones.
• When your device has connected to your headphones, return to the MyDyson™ app.

Charging your headphones

• Your headphones will need to have more than 20% charge to run purification.
• You can check charge level by pressing the airflow button.

Battery life

• The battery life of your air-purifying headphones will improve with use. Allow at least 5 hours of initial use to achieve the best runtime performance.

Action and LED behavior

Activity modes

• Your Dyson Zone™ air-purifying headphones will detect your level of activity and adjust the airflow automatically. You can also choose to adjust the levels manually.
• Use your MyDyson™ app to select Auto, or adjust the modes manually. Alternatively, use the button on the back of the left ear cup to select modes.

Battery life

• You can extend battery life by using low airflow settings.

Using audio

• To play audio through your headphones, you’ll need to either connect them using Bluetooth® or the audio cable.
• You can play audio through your headphones without the visor being attached.

Use the audio button

• Control your audio using the MyDyson™ app or the joystick on the back of your right ear cup.

Play and pause

• Press the middle of the joystick to play. Press it again to pause.

Active noise cancelling

Use Active noise canceling (ANC) to reduce the background noise around you.

Audio joystick

How to use the Audio joystick

• Control your audio using the joystick on the back of your right ear cup.

Action

LEDs
LEDs will let you know when your Dyson Zone™ air-purifying headphones need your attention.

In-flight adaptor

• Connect the In-flight cable to the 2-pin adaptor, then plug into the plane’s entertainment system via the audio port.
• The In-flight adaptor will only charge you Dyson Zone™ headphones when the USB-C cable is also used.
• Please note that the audio controls on your Dyson zone™ headphones will not fucntion when the In-flight adaptor is in use.

Warning
The In-flight 2-pin adaptor is for connection to an audio outlet only. Plugging in to a mains socket outlet may result in a fire or pose a risk of an electric shock.

Changing your filters

Filter life

• Your MyDyson™ app and headphones will alert you when your filter life is running low. The filter life will depend on the amount of time you use your headphones and the level of your activity.
• Your filters are not washable and should be replaced once the MyDyson™ app has alerted you to do so.

Remove the cover

• Twist the covers on the ear cups until they release.

Remove the filters

• Lift out the filters carefully. Avoid dropping any dust into the ear cups. Dispose of the filters.

Insert filters

• Remove the new filters from any packaging and place in the ear cups.
• Replace the covers and twist clockwise to lock into position.

Cleaning your Dyson Zone™ purifying headphones

• It is important to carry out regular cleaning of your headphones maintain maximum performance.
• Allow enough time to dry your headphones before you need to use them again.
• Due to the materials and manufacturing processes used, your machine inclusive of the packaging, may produce a slight odour.

Quick clean

• Ear covers
  Wipe away dust or debris from the perforations in the ear cup covers with a soft, damp, lint-free cloth.

• Ear cushions
  Wipe away dust or debris with a soft, damp, lint-free cloth.

• Visor
  Wipe away dust or debris with a soft, damp, lint-free cloth.

Regular cleaning

Remove the visor

• Push the visor down and gently pull it away from the ear cups.
• Pinch the outer edges of the mesh until it pops out of the visor.
• Slide the side extensions out and unclip from the visor.

Wash visor

• Wash the visor and mesh with warm water and dish soap. Use the Dyson visor cleaning brush to reach all areas.
• Rinse all parts thoroughly.

Dry visor

• Leave your visor to dry in a well-ventilated, warm place.

Reassembling your headphones

Reassemble visor

• Make sure all parts of your visor are completely dry before reassembling.
• Slide in side extensions until they click into position.
• Clip in the inner mesh.
• Reattach the visor to your headphones.

Cleaning your Community face covering

• Gently pull the Community face covering away from the visor.

Wash

• Use warm water and dish soap. Rinse thoroughly.

Dry

• Leave your Community face covering to dry in a well-ventilated, warm place.

Replaceable FFP2 Community face covering

• Gently pull the Community face covering away from the visor and dispose.

Cleaning your community face covering

• Gently pull the Community face covering away from the visor.

Wash

• Use warm water and dish soap. Rinse thoroughly.

Dry

• Leave your Community face covering to dry in a well-ventilated, warm place.

Replaceable FFP2 Community face covering

• Gently pull the FFP2 Community face covering away from the visor and dispose.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>