T-View T-574HP Dual Channel Headphones Operational Guide
- June 4, 2024
- T-View
Table of Contents
T-View
T-View T-574HP Dual Channel Headphones
Specifications
- Product Dimensions: 4.8 x 4.8 x 4.8 inches
- Item Weight: 4.8 ounces
- Item model number: T-574HP
- Batteries: 2 AAA batteries required.
- Wireless communication technologies: Infrared
- Connectivity technologies: Wireless
- Special Features: Wireless, Volume-control
- other display features: Wireless
What’s in the box?
- T-view Dual Channel Headphones (Black)
Product Descriptions
Wire-free headphones with two Channels, Wireless headphones are those that connect to a device without the use of a wire or connection, such as a smartphone, stereo speaker, television, gaming console, computer, or other electronic device.
Features
Takes two AAA batteries FM system Carrier Frequency Infrared Light Volume Control, Channels A & B
Note
Products with electrical plugs are made with American consumers in mind. Because outlets and voltage vary from country to country, this device might need an adapter or converter to be used where you are travelling. Before buying, kindly verify compatibility.
Charge duration
The JLAB headphones have an astounding battery life of up to 45 hours on a single 2 hour charge. It features a fast charging feature, so even five minutes of fast charging might provide you with about ten hours of listening time.
COMPLETE CONTROL
With the help of the convenient, multifunctional buttons on the headset, you can now have complete control over the volume, play/pause, mute, answer, and reject calls.
**Secure fit and Comfort**
These headphones provide a secure fit and a high level of comfort all at once. Because of how soft they are, the earmuffs are cosy to wear.
Warranty and Support
You can get in touch with the manufacturer directly or find out more information on their website if you’d want a copy of the warranty for a product you saw on Amazon.com. Manufacturers’ warranties might not always be applicable, depending on things like how the product is used, where it was bought, and who sold it to you. If you have any issues, please read the guarantee, and then get in touch with the seller.
Frequently Asked Questions
Are there noise-canceling devices?
The T-View T-574HP does not have Active Noise Cancellation. T-View T-574HP supports both Transparency mode and ANC in a same form.
How can I bill them?
To charge your T-View T-574HP, insert the included micro-USB cable into the slot on the bottom of the right ear cup.
How are they switched on and off?
The T-View T-574HP can be turned on or off by pushing and holding the power button for one second on the right ear cup.
What is the battery life?
The T-View T-574HP has a 40-hour battery life on a full charge.
Is there a microphone available?
A built-in microphone is available on the T-View T-574HP for use with voice assistants and phone calls.
Exists a power-saving setting?
Yes, if there is no sound playing or when there is no linked device, the headphones will immediately turn off.
Can I easily wear them for a number of hours?
These headphones’ earmuffs are incredibly plush and comfortable, making them a terrific choice for prolonged professional use.
Are these headphones have ability to resist water?
Despite not being waterproof, they can nevertheless withstand the occasional light rain.
What is the wireless connection’s range?
The connectivity range of these headphones is good, reaching up to 10 metres
(33 feet).
The audio cable’s length is.
A typical 3.5mm to 3.5mm audio jack cable is approximately 1 metre length.
Why do my headphones stop working after being charged or after being worn for a while?
Correct the problem with the headphones’ inadequate power. An inconsistent
charging current will have an effect on the charging module.
Please connect the 3.5mm audio cable from the headphone accessory to the
headphone 3.5mm connector to complete the factory reset. headphones.
How should I plug my device in to charge it?
To prevent fire or burning the charging IC when charging the headset, we
installed over-voltage protection. If you use a charger that is more powerful
than SV, the headset will immediately enter the overvoltage protection
condition and stop charging. It is recommended to use the original 5V charging
plug.
Why is the signal on the headphones sporadic?
A Bluetooth headphone’s practical range is 10 metres in an unobstructed space.
For instance, when used indoors, the headphone signal will be weaker after
passing through a wall.
In high-traffic areas like airports, train stations, subways, bus stops,
shopping malls, and locations with a lot of signal sources like signal lights
and monitors, Bluetooth headphones are prone to signal instability.
Why won’t the pair mode on my headphones work?
After turning on the headphones, you must continue to hold down the shutdown button for 5–6 seconds. When the signal lights begin to alternately and quickly flash, the headset is in pairing mode. If you press the shutdown button too quickly, you cannot enter pairing mode.
In what ways does hybrid active noise cancellation work?
Hybrid noise-cancellation approaches comprise hybrid noise-cancellation, which detects and then eliminates background noise using microphones. The microphones work better with normally louder sounds since they are outside, where they tend to block out a larger spectrum of frequencies.
Active noise-canceling headphones allow you to sleep.
However, noise-cancelling headphones are not frequently used during sleep. Since padding enhances the seal and noise reduction, the majority of them are actually too bulky to allow you to sleep comfortably. This means that you can’t just pick any pair of noise-canceling headphones for sleeping.