HOVER-1 ALPHA 2.0 Electric Scooter Instruction Manual

ALPHA 2.0

ALPHA 2.0 Electric Scooter

OPERATION MANUAL
H1-ALP2

HELMETS SAVE LIVES!
Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your E-Scooter.

Correct Fit:
Make sure your helmet covers your forehead
Incorrect Fit:
Forehead is exposed and vulnerable to serious injury.

WARNING
As with all mechanical devices, the Hover-1 Alpha 20 is subject to wear and high stresses. Different materials and components may react to wear or fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any form of crack, scratch, or change of coloring in highly stressed areas indicate that the life of the component has been reached and it should be replaced. Do not ride in an abusive manner.
CAUTION
In this manual, the CAUTION sign indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.
WARNING
In this manual, the WARNING sign indicates a hazardous situation which, if not avoided, can cause serious injury or death.
WARNING
Great care should be taken with the Hover-1 Alpha 2.0 when folding and unfolding it. Moving and folding parts can cut skin or pinch if mishandled.
DO NOT RIDE YOUR HOVER-1 ALPHA 2.0 WITHOUT THE STEERING COLUMN, FOLDING HINGE, AND HANDLEBARS SECURELY LOCKED IN PLACE.

WARNING
PLEASE READ THE OPERATION MANUAL
THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in the operation manual can lead to damage to your Alpha 2.0, property damage, serious bodily injury, and even death.

Thank you for purchasing the Hover-1 Alpha 2.0. Please read all  instructions carefully before using it and retain this manual for futurereference.

•  To avoid collisions, falls, and loss of control, please learn how to ride the Alpha 2.0 safely.
• You can learn how to ride the Alpha 2.0 by reading the operation manual and watching videos
• All users are responsible for any consequences caused by violating warning contents or proper operations. Hover-1 can not be held liable.

ATTENTION

1.  Use only the supplied charger from Hover-1 with this E-Scooter.
2.  The operating temperature range of the charger is 32°F – 104°F (0°C – 40°C).
3. The operating temperature range of the Alpha 2.0 is 32°F – 104°F (0°C – 40°C).
4.  Do not ride on icy or slippery surfaces.
5.  Read the operation manual and warning labels before riding
6.  Store the Alpha 2.0 in a dry, ventilated environment.
7.  When transporting the Alpha 2.0, avoid violent crashes or impact.

LOW TEMPERATURE WARNING
Low temperatures will affect the lubrication of moving parts inside the Alpha 2.0, increasing internal resistance. Additonally, the discharge capacity and capacity of the battery will be significantly decreased.
Use caution when riding the Alpha 2.0 in cold temperatures (below 40°F/4°C). Doing so may increase the risk of mechanical failures of the E-Scooter, which may lead to damage to your device, property damage, serious bodily injury, and even death.

SAFETY INSTRUCTIONS

• Keep the E-Scooter away from heat sources, direct sunlight, humidity, water, and any other liquids.
•  Do not operate the E-Scooter if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the E-Scooter.
•  Do not use the E-Scooter if it has been dropped or damaged in any way.
•  Repairs to electrical equipment should only be performed by the manufacturer. Improper repairs void the warranty and may place the user at serious risk
•  Do not puncture or harm the exterior surface of the E-Scooter in any way.
•  Keep the device free from dust, lint, etc.
•  Do not use this E-Scooter for anything other than its intended use or purpose. Doing so may damage the E-Scooter or lead to property damage, injury, or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose the batteries to excessive heat such as direct sunlight or an open flame.
• Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or the drivetrain while the Alpha 2.0 is running.
• Do not operate or allow others to operate the Alpha 2.0 until the user understands all instructions, warnings, and safety features described in this manual
• Check with your doctor if you have a medical condition that could affect your ability to use the Alpha 2.0.
•  Persons with head, back, neck ailments, or prior surgeries to those areas of the body are not recommended to use the Alpha 2.0
• Do not operate if you are pregnant or have a heart condition.
• Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize, understand, and perform all of the safety instructions and assume the hazards inherent in operation should not use the Alpha 2.0

SERIAL NUMBER
Please keep your serial number on file for warranty claims as well as proof of purchase.

WARNING
Prolonged exposure to UV rays, rain, and the elements may damage the enclosure materials. Store indoors when not in use.

INTRODUCTION

The Alpha 20 is a personal transporter. Our production processes are developed with strict testing for each Alpha 2.0 E-Scooter. Operating the Alpha 2.0 without following the contents of this manual may lead to damage to your Alpha 2.0 E-Scooter or bodily injury.

PACKAGE CONTENTS

• Hover-1 Alpha 2.0 Electric Folding Scooter
• Charger & Charging Cable
• Hex Key & Bolts
• Air Pump
  Your Alpha 2.0’s serial number is stamped on the bottom of the E-Scooter platform. Record the serial number in the designated area of the “WARRANTY” section of this manual in case your Alpha 2.0 is lost or stolen.

SAFETY PRECAUTIONS

• The first rule of safe riding is to use common sense.

• Different localities and countries have different laws about riding electric transportation devices on public roads. You should check with local officials to ensure you are complying with local traffic law requirements.

• Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations.

•  For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.

•  Obey all local traffic laws. Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.

• Ride with traffic, not against it.

•  Ride defensively; expect the unexpected.

•  Give pedestrians the right-of-way.

•  Do not ride too close to pedestrians and alert them if you intend to pass them from behind.

•  Slow down at all street intersections and look to the left and right before crossing.

•  Your Alpha 20 electric scooter is not equipped with reflectors.
  It is not recommended that you ride in conditions of low visibility.

• If you are riding your E-Scooter in low-visibility conditions, ensure your LED headlight is turned on, and that you are wearing bright, reflective clothing.

WARNING
When you ride in low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. To increase your level of safety, be sure to wear bright, reflective clothing when riding in low-visibility conditions.

• Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your Alpha 2.0.
•  Do not ride too fast – with increased speed comes increased risk. If you are moving at a higher speed, small bumps can create strong impacts, leading to a higher risk of injury.
• Do not ride with pets.
•  Before stepping on your Alpha 2.0, make sure it is placed flat on level ground.
•  Do not try to open or modify your Alpha 2.0 E-Scooter. Doing so voids the manufacturer warranty and may cause your Alpha 2.0 to fail, resulting in injury or death.
•  Do not use the Alpha 2.0 in a manner that would put people or property in danger.
•  If you are riding near other riders, be sure to maintain a safe distance between each other to prevent collisions.
• Be sure to keep your feet on the Alpha 2.0 at all times. Moving your feet off your Alpha 2.0 while driving is dangerous and may cause the Alpha 2.0 to stop suddenly or veer sideways.
• Do not operate the Alpha 20 while under the influence of drugs or alcohol.
• Do not operate the Alpha 2.0 when you are restless or sleepy.
• Use your best judgment to keep yourself out of dangerous situations with your Alpha 2.0.
• Do not ride your Alpha 2.0 off of curbs, ramps, or attempt to operate in a skate park, empty pool, or in any way similar to a skateboard. Misuse of your Alpha 20 voids the manufacturer warranty and may lead to injury or damage.
•  Do not abuse your Alpha 2.0. Doing so can damage your unit and cause failure to the operating system, which may lead to injury. Physical abuse, including dropping your Alpha 2.0, voids the manufacturer warranty.
• Do not operate in or near puddles of water, mud, sand, stones, gravel, debris, or near rough and rugged terrain.
• The Alpha 2.0 can be used on paved surfaces that are flat and even. If you encounter uneven pavement, lift your Alpha 20 over and past the obstruction.
• Do not ride in inclement weather: snow, rain, hail, sleet, on icy roads, or in extreme heat or cold.
•  Bend your knees when riding on bumpy pavement to absorb the shock and vibrations. This will help you keep your balance.
• If you are unsure if you can safely ride on a specific terrain, step off and carry your Alpha 2.0. Always be on the side of caution.

WARNING
Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excessive force to your brakes. Apply your brakes gradually and give yourself enough room to come to a complete stop safely.

•  Do not attempt to ride over bumps or objects greater than % inch, even when prepared and bending your knees.
• Pay attention. Look where you are riding and be conscious of the road conditions, people, property, and objects around you.
• Do not operate the Alpha 2.0 in crowded areas.
• Operate your Alpha 2.0 with extreme caution when indoors, especially around people, property, and narrow spaces.
•  Do not operate the Alpha 20 while talking, texting, or looking at your phone.
• Do not ride your Alpha 2.0 where it is not permitted.
• Do not ride your Alpha 2.0 near motor vehicles or on public roads.
• Do not travel up or down steep hills.
•  The Alpha 2.0 is intended for use by a single individual, DO NOT attempt to operate the Alpha 2.0 with two or more people.
• Do not carry anything while riding the Alpha 2.0.
• Individuals with lack of balance should not attempt to operate the Alpha 20.
•  Young children and the elderly should not operate the Alpha 2.0.
• At higher speeds, always take longer stopping distances into consideration.
• Do not attempt to jump on or off your Alpha 2.0.
• Do not attempt any stunts or tricks with your Alpha 2.0.
• Do not ride the Alpha 2.0 in dark or poorly lit areas.
•  Do not ride the Alpha 2.0 near or over potholes, cracks, or uneven pavement or surfaces.
• Do not operate your Alpha 2.0 off-road.
•  Do not turn sharply, especially at high speeds.
• Do not exceed the maximum weight limit of 264 Ibs (120 kg).
• Avoid driving the Alpha 2.0 in unsafe places, including areas with flammable gas, steam, liquid, dust, or fiber that could cause fire and explosion accidents.
•  Do not operate near swimming pools or other bodies of water.
• Maintain a safe braking distance during wet conditions.

WARNING
There may be additional risk of injury if you use your
E-Scooter incorrectly. This includes, but is not limited to:

•  Jumping your E-Scooter
• Riding over debris or obstacles
• Performing stunts
•  Riding off-road
• Riding fast
•  Racing other riders
• Riding in an unusual manner

The aforementioned examples add stress to each part of your E-Scooter and can lead to long term damage of the device. Damage to your E-Scooter can lead to an accident or increase your risk of injury. To decrease your risk of injury, use your E-Scooter correctly.

WARNING
To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pOO’S, or other bodies of water. Always wear shoes, and never allow more than one rider at a time.

CARE & MAINTENANCE

• To avoid damage to the Alpha 205 internal circuitry, do not expose it to liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents to clean the Alpha 2.0.
•  Do not expose the Alpha 2.0 to extremely high or low temperatures, as this will shorten the life of the device, destroy the battery, and/or distort certain plastic parts
• Do not dispose of the Alpha 2.0 in fire as it may explode or combust.
•  Do not let the Alpha 2.0 come into contact with sharp objects, as this will cause scratches and damage.
• Do not let the Alpha 2.0 fall from high places, as doing so may damage the internal circuitry.
• Do not attempt to disassemble the Alpha 2.0.
• Use only the charger provided by Hover-1
•  Use only the manufacturer’s authorized replacement parts.

WARNING
Avoid using water or other liquids for cleaning. If water or other liquids enter the Alpha 2.0, it will cause permanent damage to the internal components.
WARNING
Users who disassemble the Alpha 2.0 without permission from Hover-1 will void the warrant:

BATTERY CARE / MAINTENANCE

BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 5 hours
Battery Voltage: 36V
Battery Capacity: 6Ah
Working Temperature: 32°F – 104°F (0°C – 40°C)
Charging Temperature: 32°F – 104°F (0°C – 40°C)
Storage Time: 1year
Storage Temperature: 32°F – 104°F (0°C – 40°C)
Storage Humidity: 5% – 95%

BATTERY MAINTENANCE

•  The lithium-ion battery is built into the E-Scooter. Do not disassemble the E-Scooter to remove the battery or attempt to separate it from the E-Scooter.
• When charging the E-Scooter, only use the enclosed 1-pin charging cable provided by Hover-1. Use of any other charger or cable may lead to damage to the E-Scooter, overheating, and risk of fire. Use of any other charger or cable voids the manufacturer warranty.
•  Do not connect or attach the E-Scooter or the battery to a power supply plug or directly to a car’s cigarette lighter.
• Do not place the E-Scooter near afire or leave it out in direct sunlight. Heating the E-Scooter can break or ignite the battery inside the device.
• Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupture, or ignite.
• To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

WARNING
Failure to follow the safety precautions listed below could lead to serious bodily injury or death.

• Do not attempt to modify, change, or replace your battery.
•  Do not use your device if the battery begins to emit odor, overheats, or begins to leak.
•  Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children or animals to touch the battery.
• The battery contains dangerous substances. Do not open the battery or insert anything into the battery.
•  Do not attempt to charge the device if the battery has discharge or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.

WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT IS EMITTED FROM THE BATTERY.

SPECIFICATIONS

Model:
Net Weight:
Max Supported Weight:
Min Supported Weight:
Max Speed:
Max Range:
Battery Type:
Motor Power:
Battery Voltage:
Battery Capacity:
Power Requirement:
Folding Size:
Open Size:
Tire Type:
Tire Size:
Tire Inflation Pressure:
Brake Type:
BT ID:
FCC ID:
UL Certification:| H1-ALP2
34.4 lbs 05.6 kg)
264 lbs (120 kg)
44 lbs (20 kg)
Up to 18 mph (28.9 km/h)
Up to 12 miles (19.3 km)
Lithium-ion
450W brushless motor
36V
6Ah (30 cell)
100V-240V, 50 Hz/60 Hz
44.7 in. x16.7 in. x16.9 in.
(113.5 cm x 42.5 cm x 42.8 cm)
44.7 in. x16.7 in. x 45.4 in.
(113.5 cm x 42.5 cm x115.2 cm)
Inflated rubber tires
10″ front & rear
340 kPa
Hand-activated rear disc brake
D044966
2AANZALPHA21M
UL2272 certified
---|---

PARTS LIST

A. Alpha 2.0 E-Scooter
B. Handlebar Assembly
C. Charger + Charging Cable
D. Hex Key & Bolts
E. Air Pump
F. 6 Spare Bolts

HOVER-1 ALPHA 2.0 DIAGRAM

FEATURES/PARTS

1. LCD Display
2. Bell
3. Brake Handle
4. Handlebar (L)
5. Handlebar (R)
6. Throttle
7. Power Button
8. Folding Clip
9. Steering Column
10.  Folding Hinge
11.  Kickstand
12.  Foot Deck
13.  Charging Port
14.  Folding Hook
15.  Brake Light
16.  Rear Disc Brake

HOVER-1 ALPHA 2.0 DIAGRAM

LCD DISPLAY

BLUETOOTH® SPEAKER

The Alpha 2.0 has a powerful built-in wireless speaker, so you can play your music while riding.

PAIRING THE SPEAKER

1.  Turn on your E-Scooter. The speaker will “ping” to announce that it’s waiting for a Bluetooth” connection. This will indicate your E-Scooter’s speaker is now in pairing mode.
2. Place the E-Scooter and the Bluetooth® device you would like to pair within the operating distance. We recommend keeping the two devices no further than 3 feet (1 meter) apart during pairing.
3. Ensure Bluetooth” is enabled on your phone or music device. Refer to the manufacturer’s instructions for how to enable Bluetooth® on your device.
4.  Once you have activated Bluetooth” on your device, select the option “H1-Alpha 2.0” from the list of available Bluetooth” devices.
5. If prompted, enter the PIN code “000000″ and confirm the entry.
6. The speaker will say “paired” when successfully paired.
7.  Please note, pairing mode on the E-Scooter will last for two minutes. If no devices are paired after two minutes, the E-Scooter speaker will automatically return to standby mode.
8. If pairing is unsuccessful, turn off the E-Scooter first and try again following the previous steps.
9.  If your smartphone is out of range, or the battery is low on your E-Scooter, the speaker may disconnect from your device, and the speaker will say “disconnected.” To reconnect, follow the previous steps, or recharge your E-Scooter.

NOTE: Once you have paired the E-Scooter speaker with a device, the speaker will remember the device and will pair automatically when the device’s Bluetooth® is activated within range. You do not need to re-pair any previously connected devices.
Your E-Scooter can pair with up to two multi-point devices at a time. You can reconnect a previously paired device without going through the pairing process for up to two devices.
LISTENING TO MUSIC
Once the Bluetooth” speaker is paired to your device, you can stream music wirelessly through it. Select the track you wish to listen to on your device. All volume and track controls will be made using your music device. Should you encounter any problems while streaming, please refer to your device’s user manual.

CHARGIN YOUR ALPHA 2.0

• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris, or dirt inside the port,
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V-240V: 50 Hz/60 Hz)
•  Align and connect the 1-pin charging cable into the charging port of the Alpha 2.0 (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK).
• The charging indicator light on the charger itself should change to red, indicating that your E-Scooter is now being charged.
• When the red indicator light on your charger changes to green, your E-Scooter is fully charged.
• After fully charging your E-Scooter, unplug the charger from your device and from the wall outlet
• If the E-Scooter is not used for an extended period of time, you may need to recharge the battery every 2 months to maintain the battery life.

CAUTION
Only use the included charging cable and charger to charge your Alpha 2.0. Using any other charger may damage your Alpha 2.0

PREPARING YOUR E-SCOOTER
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY

ATTACHING THE HANDLEBAR ASSEMBLY
Attach the handlebar assembly by placing it into the steering column, aligning the front and back bolt holes, and tightening the 4 bolts into place with the hex key.

PINCH POINTS

Some parts of your Alpha 2.0 can injure you if mishandled. Moving and folding parts can cut skin. Clamps and pivoting parts such as brake levers can pinch. When folding and unfolding your Alpha 2.0, please watch for pinch points where injury may be  sustained. Do not leave your hand in these areas during the folding or unfolding process.

FOLDING & UNFOLDING

To fold your Alpha 2.0 , use your thumb to push the twist lock counter- clockwise until it is no longer in front of the folding hinge. Grab the folding hinge with one hand and hold the steering column with the other. Pull the folding hinge down and push the steering column down to the foot deck.
To unfold your Alpha 2.0, raise the steering column until it is standing up. Pull the folding hinge up and press it against the steering column. Use your thumb to push the twist lock until it is positioned in front of the folding hinge.

SPEED MODES
To change speed modes, press the power button once while the Alpha 20 is powered on and not in motion. The following are the top speeds for each speed mode:

1.  Low speed mode (max speed 12 mph)
2. High speed mode (max speed 18 mph)

CRUISE CONTROL

To activate cruise control, quickly press the throttle down two times while you are riding at a constant speed above 3 mph. You will hear a beep and the cruise control indicator will light up on the LCD display, indicating that it is activated. Press the throttle down once or squeeze the brake handle to cancel cruise control.

KICK TO START
For safety reasons, the Alpha 2.0 will not accelerate unless it is already moving at least 1.8 mph (3 km/h). You must push off the ground with your foot to get the Alpha 2.0 moving, then press the throttle to ride it.

BEFORE RIDING

Before each use, the E-Scooter operator shall perform the pre-operation checks as specified below:

• The area that the unit is to be operated in is safe and suitable for safe operation.
• The braking system is functioning properly.
• All safety lables are in place and understood by the operator.
•  Any and all axle guards, chain guards, or other covers and guards supplied by the manufacturer are in place and in serviceable condition.
• The tires are in good condition, inflated properly, and have sufficient tread remaining

WARNING
Any E-Scooter that does not work properly] can cause you to lose control and fall. Do not ride an E-Scooter with a part that is damaged. Replace the damaged part before riding.

Itis important that you fully understand all the functions of your Alpha 20 E-Scooter. If these functions are not used correctly, you will not have full control of your Alpha 2.0.
Practice using the functions of your Alpha 2.0 at slower speeds in a flat, open area before taking it out into public areas.
PRE-RIDE CHECKLIST
Ensure that your Alpha 2.0 is in proper working order each time you ride. If a part of the Alpha 2.0 does not function correctly, please contact our Customer Support Center.

• Ensure the battery is fully charged before riding your E-Scooter.
• Please wear all appropriate safety and protective gear before operating your E-Scooter.
• Make sure to wear comfortable clothes and flat, closed-toe shoes when operating your E-Scooter.

RIDING YOUR ALPHA 2.0 E-SCOOTER
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS MAY LEAD TO DAMAGE TO YOUR DEVICE, DAMAGE TO PROPERTY, VOID YOUR MANUFACTURER WARRANTY, AND MAY CAUSE SERIOUS BODILY INJURY OR DEATH.
OPERATING YOUR DEVICE
Make sure the device is fully charged before the first use. Before turning on your Alpha 20 E-Scooter, ride it like a normal kick scooter to get comfortable with the device before using it with the motor.
When you are comfortable riding the E-Scooter, power it on. For the motor to activate, you must first push off the ground with your foot to get the E-Scooter moving, then press the throttle down with your thumb.
To slow down, disengage the throttle and squeeze the brake handle to engage the disc brake. The brake is pressure-sensitive, so a tighter squeeze will result in more stopping power. Do not attempt to stop suddenly as this may lead to injury or damage to your brake discs.
Use the handlebars to turn the Alpha 2.0 in the desired direction.
The Alpha 20 can be operated manually if you do not wish to use the motor.
As you get comfortable on the E-Scooter, you will notice it becomes easier to maneuver. Remember at higher speeds, it is necessary to shift your weight when making turns to maintain your stability.
Prepare to brace yourself if you encounter bumps or uneven surfaces.
If necessary, dismount your Alpha 2.0 and carry it to a safe operating surface.

WARNING
Do not turn sharply or at high speeds. Do not turn or ride quickly along slopes, as it may cause injury.

SPEED AND WEIGHT LIMITATIONS
Speed and weight limits are set for your own safety. Please abide by the limits listed here in the manual.

• Maximum Speed: 18 mph
•  Maximum Supported Weight: 264 Ibs
• Minimum Supported Weight: 44 lbs

WARNING
Riding the Alpha 2.0 while exceeding the weight limit may increase the possibility of injury or product damage.

OPERATING RANGE
The Alpha 2.0 can travel up to 12 miles on a fully charged battery under ideal riding conditions. The following are some of the major factors that will affect the operating range of your device:

• Terrain: Operating range is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce the operating range significantly.
• Weight: A lighter user will have a higher operating range than a heavier user.
•  Ambient Temperature: Please ride and store the E-Scooter in recommended temperatures. This will increase operating range, battery life, and overall performance of your device.
•  Speed and Riding Style: Maintaining a moderate and consistent speed while riding produces maximum operating range. Traveling at high speeds for extended periods of time, frequent starts and stops, and idling will decrease operating range.

WARNING
Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excessive force to your brake. Apply the brake gradually and give yourself enough room to come to a complete stop safely.

SAFETY ALERTS

If a system error occurs or an improper operation is performed while riding your Alpha 2.0, the device will alert the user in a variety of ways.
The following are common occurrences that will produce safety alerts.
These notices should not be ignored and appropriate action should be taken to correct any improper operation, failure, or errors.

• Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
• Battery voltage is too low.
• The E-Scooter is still charging.
• The E-Scooter is overheating, or the motor temperature is too high.
• When the battery is about to run out of power, the battery icon will flash.
• If any or both tires are blocked, the device will stop after 10 seconds.
•  When the battery level has depleted below protection mode, the motor will power off after 15 seconds.
• If a high discharge current is produced during use (such as riding up a steep slope for a long period of time), the motor will shut off after 15 seconds.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not oceur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARRANTY

For warranty information, please visit us at www.hover-1.com

Error E2 – accelerator failure, the accelerator needs to be replaced
Error code E3 – motor blocking fault, release the accelerator
Error E4/MOS – mainboard MOS tube failure, the mainboard needs to be replaced
Error E6 – controller / instrument communication failure, the controller needs to be replaced
Error E7 – battery over-voltage protection, the battery needs to be replaced
Error E8 – controller error, the controller needs to be replaced
Error E9 – brake failure, the brake needs to be replaced

Manufacturer: DGL Group, Ltd.
2045 Lincoln Highway, Edison, NJ 08817
TEL: 732-692-5000

Affix Serial Number Label Here:

| @HoverlRideables
---|---
| @RideHovel
|  @RideHovel
|  www.Hover-l.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>