Sonic Blast HD-016LSD-Q Soundbar with Subwoofer Instructions

Sonic Blast HD-016LSD-Q Soundbar with Subwoofer

Important Safety Instructions

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install it near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other.

10. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety.

11. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

12. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

13. Only use attachments/accessories specified by the manufacturer.

14. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

15. Unplug this apparatus during lightning storms or when unused for long periods of time.

16. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or
    plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

17. Special note: When placing your unit on a lacquered or natural finish, protect your furniture with a cloth or other protective material.

FCC Warnings

WARNING
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.

Additional Warnings
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.  The battery shall not be exposed to excessive heat such as sunshine, fire, or light.
This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.

What do you get

Make sure you read all the safety information before you use this product.

Product Structure

Sound Bar main unit

1. Power: Press 0.5 seconds to switch it on, and hold for 3 seconds to turn it off Mode: Turn it on and then press 0.5 seconds to switch the mode
2. Short press for next song; Long press for increasing volume
3. Short press for the previous song; Long press for decreasing volume 0 Play/Pause

Subwoofer

Remote
Power the remote by inserting 2 pcs of AAA batteries (not supplied)

Place your Sound Bar and Subwoofer

Place on the cabinet
The ideal place to position the Sound Bar is centered underneath your TV.

Place your Sound Bar and Subwoofer

Mount the sound bar on the wall

Tools & fixings required

1. Drill fitted with masonry drill bit
2. Pencil
3. Screwdriver
4. Level Ruler

Use the lever ruler to mark two mounting holes with a pencil. Drill two screw holes at each marking on the wall. Secure the supplied anchors. and screws into the hole. Please make sure the screws are protruding 5mm in the wall. Anchors are only required when mounting onto a solid wall. 8 Hang the sound bar on the fastening screws. Gently push the sound bar down to lock and secure it in place.

How to use it?
Connecting Electrical Power

1. Using the power adapter to connect the unit to an electrical outlet in the figure
2. Press the power button to power on the Soundbar (LED screen will turn on)

Soundbar connect to subwoofer

1. Insert the subwoofer plug into the SW port of the soundbar.

Connect to your TV

Optical

• Connect the Sound Bar with your TV through the supplied Optical cable.
• Select “OPT’ on the LED screen by pressing the “OPT’ button on the remote.
• Play a TV show to test the soundbar.
  Note: If no sound or cracking noise. please change the TV audio output to an external speaker and PCM. Saving the settings.(Refer to 08)

Coaxial

• Connect the Sound Bar with your TV through the Coaxial cable.

• Select “COA” on the LED screen by pressing the “INPUT’ button on the remote.

• Play a TV show to test the soundbar.
  Note: If no sound or cracking noise. please set your TV’s audio output to an external speaker and PCM. Saving the settings. (Refer to 08) Connect the Sound Bar with your TV through an AUX cable.

• Select “AUX” on the LED screen by pressing the “INPUT’ button on the remote.

• Play a TV show to test the soundbar.

Note: lf no sound or cracking noise. please change the TV audio output to an external speaker. Saving the settings. (Refer to 08) You can use the 3.5mm to 3.5mm audio cable (not supplied) to connect or 3.5mm to the RCA cable (supplied) to connect it. Choose only one connection from above it. It depends on your TV’s audio output jack.

External speakers and PCM settings
Please note almost all the TV audio output is the analog signal and the internal speaker, but the optical cable and coaxial cable are the digital signal. So when you want to hook up the soundbar on your TV through optical or coaxial cable, you must change the TV audio output to digital output(PCM or SPDIF)and external speaker.

1. How to set PCM on your TV
2. Enter your TV’s settings menu.
3. Select the Audio or sound settings option.
4. Select the audio out or digital out setting.
5. change the setting to PCM. (some TVs are called SPDIF)

How to disable the TV’s internal speaker

1. Enter your TV’s settings menu.
2. Select the Audio or sound settings option.
3. Select the TV speaker.
4. Select the External speaker. (or disable the TV speaker)
5. Please kindly make sure you have changed the TV audio output correctly, if the TV still has no sound, or output crack sound, or a popping sound, please kindly share your TV brand, model number, and order ID with us through service mail:support@Sonic-Blast.com.cn, so we can guide you to fix the problem.
6. If you do not know how to set the TV audio to PCM, please kindly refer to your TV manual or call the TV manufacturer for help.

Pair with your BT device
You can stream music from your mobile device via Bluetooth.

• Select “BT” on the LED screen by pressing the “BT” button on the remote.

• Turn on the BT device and select “SonicBlast-016LSD-Q” from the list. connect it.

• Play music to test it.
  Note: Bluetooth wireless range reaches 30 feet in the open area.

• If you want to pair it with another device. please refer to the steps above.

USB

1. Connect your USB device to the USB jack on the Soundbar.
2. Select “USB” on the LED screen by pressing the “INPUT” button on the remote.
3. Play music files from the USB device through the Soundbar.

Note: Only for USB flash drives to play MP3 music and update firmware. can not be compatible with other USB devices.

How to use it?

Connecting with a TV
There are 4 ways to connect your sound bar to the TV (listed in order that we recommend): Optical (refer to 7.1).TV ARC (refer to 7.2). and COAX (refer to 7.3).AUX ( refer to 7.4) .

Specification

FAQ

No Sound

| 1.   Please check if the soundbar is consistent with the input mode of Sound Source by following the manual.

2.   Press the Volume+ button on the remote or soundbar to volume up.

3.   Please check the output devices if the output of sound source is working.

|

Please make sure all the soundbar ports are input ports and all the connected devices are audio output.

---|---|---

No sound when TV is connected with optical.

| 1.    Set up the optical output.

2.   Set up the audio output format–PCM.

3.   Adjust to optical mode, and the Led indicates white lightning.

4.    Please check if the optical is connected with TV effectively.

5.   Volume up the soundbar.

| Please take out the transparent antidust caps on two sides of optical. One side of optical indicates the white lightning when TV is connected well, and then plug the other side of optical into the optical port of soundbar.

Devices can’t connect with BT

| 1.   Select “BT” on LED screen by pressing the “BT” button on the remote.

2.   Reboot the cellphone or bluetooth devices, search again.

3.   Please make sure the soundbar is disconnected with other BT devices, shut off and try again.

4.   Please chesk if there is strong interfering signal around, such as: WIFI, 2.4G; try to use in other space.

5.   Please try to use other BT devices to test if the BT device has problem of its own.

|

The BT is only connected with one device, other devices cant search it when it has connected.

The distance of BT is short or on and off

| 1.      Please check if there is strong interfering signal around, such as: WIFI, 2.4G; try to use in other space.

2.       Reboot the cellphone or BT devices, then reconnect.

3.      Please make sure there is no obstacle between the soundbar and BT device in case of blocking the signal.

4.       Power off the soundbar and then reboot.

|

The working distance of BT is 10m (empty place).

The remote is not working

|

1.   Please check if the positive and negative of battery is right. (There is noted on the batterys compartment)

2.   Please check if the receiving location is blocked beside the LED on soundbar.

3.   The working distance of remote is 6-8m (empty place).

|

Please make sure all the soundbar ports are input ports and all the connected devices are audio output.

---|---|---

The sound is low or bad

| 1.   Please make sure if the volume of output device is big.

2.   Please try to play with other devices to test if the working device has problem of its own.

3.   The product is designed for home, it would be much better if the space is moderate.

|

The location of soundbar can affect your experience in some extent.

The sound is inconsistent with the sound of TV| Please set up and shut off the sound of TV.| Check the TVs manual.

BT can’t be connected

| 1.   Check if the Sound Bar is connected with the third BT device.

2.   Be sure that there are no solid obstructions between the Sound Bar and source device. (Within 30 feet)

3.   Press and hold BT button on remote for 3 seconds, and connect it again.

|

LED screen keeping display BT.

No sound or crack sound from streaming video APP

|

Please note the streaming video APP default audio if Dolby or DTS, such as Netflix,Youtube, Amazon prime video, Hulu and HBO, but this soundbar do not support the Dolby and DTS.

| Please kindly disable the Dolby and DTS on your app.

here is the method for Netflix in below: Step 1, launch the Netflix APP

Step 2, Select the TV show or Movie

Step 3, While your TV show or movie is playing,

press the Down arrow on your remote

Step 4, Select Audio&Subtitles,disable the Dolby

and DTS, save settings

Step 5, play the video to test sound

Kindly note the method may differ according to your device, more method, please visit this link:support@Sonic-Blast.com.cn

We will offer a prompt and authoritative reply within 24 hours.and try our best to resolve your problem ASAP.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>