Shenzhen Fanmeida Technology SS1 TWS Earbuds User Guide
- June 6, 2024
- Shenzhen Fanmeida Technology
Table of Contents
First Quick Use
- Take out the Left and Right Earbuds from the case, the earbuds will automatically start and pair each other.
- Open Bluetooth in your device, searching and matching “Soundseeker”.
- The earbuds will automatically match the device after the first time connected when opening the charging case.
- Make sure the device’s Bluetooth is On when using the earbuds, or automatically connection will fail.
Comfortable Wearing
- Please wear the earbuds correctly, “L” fits the left ear, “R” fits the right ear.
- Put the earbuds head into the ear canal entrance, gently moving it in.
- Slightly rotate the earbuds to get the ideal seal and comfortable audio experience.
Operation Instruction
Cause/Play Music
When playing music, single-click the touchpad to pause, and single-click the touchpad for playing the next music
Next Music
When playing music,quickly click the touchpad 2 times to switch
Previous Music
When playing music,quickly click the touchpad 3 times to switch previous music
Answer/Hang-up
Incoming call, quick click the touchpad to answer the phone, and then quick
click the touchpad to hang up the phone
Voice Control
Long click the touchpad for 2 seconds awaking the voice control
Reject Call
During the call, long click the touchpad for 2seconds to reject the call
Earbuds Charging
- Battery display: support both IOS/Android devices.
- Low battery alarm: when the battery in earbuds is lower than 3.4v, it flashes every 5 seconds.
- Power off when the battery in earbuds is lower than 3.2v, it automatically powers off.
- Earbuds Charging: put the earbuds into the charging case and shut the cover, the earbuds charge automatically till full charge.
Case Charging
- Charging case power display: when opening the charging case, the 4 white LEDs light up for 5 seconds to show battery percentage then off.
- Charging case battery percentage: there are 4 white LEDs in the middle of the case to show 25% battery for each led.
- Charging case charging status: when charging the case, the white led lights glow slowly from the bottom to the top till full charge.
Single Earbuds Operation
- Seamlessly switch from the Left earbuds to the Right earbuds or the Right earbuds to the Left earbuds when connected to Bluetooth.
- Open the charging case, the Left and Right earbuds pair each other automatically.
- Choose a single earbud for use.
- If you want to use both earbuds, simply put another one into your ear.
Specification
- Bluetooth Pairing: Sunseeker
- Bluetooth Version: Bluetooth V5.2
- Bluetooth Protocol: A2DP,HSP,AVRCP,AAC,SBC,APTX-HD,aptX Classic
- Audio Decoder: AAC,SBC,aptX,aptX-HD,app classic
- Bluetooth Range: 10 meters
- Speaker: dynamic speak + armature speaker
- Microphone: Silicimide 38db±1db
- Noise Cancelling: CVC8.0 noise canceling
- Switch: Hall switch
- Earbuds play time: about 8 hours
- Earbuds talking time: about 6 hours
- Charging case battery life: about 80 hours
- Earbuds battery capacity: 40mAh
- Charging case battery capacity: 1100mAh
- Earbuds charging time: about 2 hours
- Charging case charging time: about 3 hours
- Charging type: Type-c
- Charging display: 4 white LEDs each led stands for 25%
Safety Instruction
- Do not disassemble or modify the earbuds set for any reason, or the earbuds may break or destroy.
- Keep the earbuds set away from liquid, oil, fire, or other hazardous substance, or it may damage or destroy the earbuds.
- Beware of sharp edges, angles, uneven metal surfaces,metal parts, accessories to avoid any possible damage.
- Avoid the indicator lights in the eyes of human beings or pets.
- Do not use the earbuds set in a bad environment too low or too high temperature (below -5℃ or above 45℃).
- Do not use the earbuds set in thunderstorm weather,it may lead to abnormal operation of the equipment and increase the risk of electric shocks.
- Please do not use the earbuds in dangerous accessions, like driving, crossing the road etc.
- The earbuds can prevent sweat, daily water, but it’s not suitable for water sports or entertainment. The charging case is not waterproof. Keep the unit dry and clean when charging.
FAQs
-
The earbuds can not pair the device?
Clear the Bluetooth pairing information in the device and switch off Bluetooth, put the earbuds back to the charging case, close the cover and ake out, switch on the Bluetooth, and pair again. -
Mobile or another device can not search Bluetooth?
Make sure there is no nearby Bluetooth the device paired the earbuds before. If yes, switch off the Bluetooth, put the earbuds back in the case, and take out and pair again. -
Do earbuds automatically pair failure? Make sure the device’s Bluetooth mode is on, or it can not pair automatically.
-
Paired but not sound? Pairing failed, repair again.
-
Earbuds can not power on or automatically power off? Earbuds low battery, charging the earbuds.
-
Are earbuds not charging?
Check the charging position or the case is running out of battery. -
Do earbuds signal bad or loss?
Keep the earbuds within 10 meters from the device or away from the signal interference. -
Can not pair PC or Laptop?
Make sure the PC or laptop has Bluetooth -
Can not transmit ACC?
Apple devices default ACC transmission, Android devices version above 10 -
Can not transmit Aptx?
Make sure the device itself supports aptX
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
The devices have been evaluated to meet general RF exposure requirements， the
device can be used in portable exposure conditions without restriction