Trust AGC2-3500R Switch Set For Outdoor Environments User Manual

June 13, 2024
Trust

Trust AGC2-3500R Switch Set For Outdoor Environments

Trust AGC2-3500R Switch Set For Outdoor Environments

Place socket switch

  1. Place socket switch
    A Plug the switch into an electrical outlet.
    B Pairing mode of the switch will be activated.
    The pairing mode lasts 6 seconds.
    Place socket switch

  2. Pair the switch with a transmitter
    A Send an ON signal within 6 seconds with a Trust Smart Home transmitter during pairing mode.
    B The switch will make a clicking sound 4x to confirm that the pairing was successful.
    The switch can store up to 32 different transmitters in its memory. The paired transmitters will be retained if the switch is moved to another outlet.
    Pair the switch with a transmitter

  3. Control the socket switch
    A Connect the device you want to control to the socket switch and press the ON button with the assigned channel on the paired transmitter to turn the switch / device ON.
    Do not exceed the maximum load: 3500W.
    B Press the OFF button with the assigned channel on the paired transmitter to turn the switch / device OFF.
    Control the socket switch

Optional: Unpair transmitter from socket switch
A Disconnect all connected devices and remove the socket switch from the wall socket. After 6 seconds, put the socket switch back in the wall socket.
B The pairing mode of the socket switch will be activated for 6 seconds.
C Send an OFF signal with a paired channel from the Trust Smart Home transmitter within 6 seconds to unpair it. The switch will make a clicking sound 4x to confirm it is unpaired.

Optional: Unpair transmitter from socket switch

Optional: Clear socket switch memory
A Disconnect all connected devices and remove the socket switch from the wall socket. After 6 seconds, put the socket switch back in the wall socket.
B The pairing mode of the socket switch will be activated for 6 seconds.
C Send an GROUP OFF signal with the Trust Smart Home transmitter within 6 seconds to clear the memory. The switch will make a clicking sound 4x to confirm the memory is cleared.

Optional: Clear socket switch memory

Safety Instructions
Product support: www.trust.com/73258. Warranty conditions: www.trust.com/warranty To ensure safe handling of the device, follow the safety advice on: www.trust.com/safety The Wireless range is strongly dependent on local conditions such as the presence of HR glass and reinforced concrete Never use Trust Smart Home products for life-support systems. This product is water-resistant. Do not attempt to repair this product. Wire colors may vary per country. Contact an electrician when in doubt about wiring. Never connect lights or equipment that exceed the maximum load of the receiver. Exercise caution when installing a receiver voltage may be present, even when a receiver is switched off. Maximum radio transmit power: -9.83 dBm. Radio transmission frequency range: 433,92 MHz

Disposal of packaging materials – Dispose of packaging materials which are no longer needed in accordance with applicable local regulations.

Disposal of the device – The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU.

Disposal of batteries – Used batteries may not be disposed of in household waste. Only dispose of batteries when they are fully discharged. Dispose of batteries according to local regulations.

Trust Electronics Ltd. declares that item number 73258/73258-02 is in compliance with Directive Electromagnetic Compatibility Regulations 2016, Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: www.trust.com/compliance

Trust International B.V. declares that item number 73258/73258-02 is in compliance with Directive 2014/53/EU – 2011/65/EU. The full text of the EU declaration of conformity is available at the following web address: www.trust.com//compliance

CUSTOMER SUPPORT

Declaration of Conformity
Trust International B.V. declares that this Trust Smart Home-product:
Model: AGC2-3500R OUTDOOR SOCKET SWITCH SET
Item number: 73258/73258-02
Intended use: Indoor/Outdoor
is in compliance with the essential requirements and other relevant provisions of the following
directives:
ROHS 2 Directive (2011/65/EU)
RED Directive (2014/53/EU)
The full text of the EU declaration of conformity is available at the following web address: www.trust.com//compliance
TRUST SMART HOME
LAAN VAN BARCELONA 600
3317DD DORDRECHT
NEDERLAND
www.trust.com
Trust Electronics Ltd.,
Sop with Dr, Weighbridge, KT13 0NT, UK.
All brand names are registered trademarks of their respective owners.
Specifications are subject to change
without prior notice. Made in China.

TECHNICAL SPECIFICATIONS TRANSMITTER

Codesystem Automatic
Number of Channels 3 + Group-Off button
Power 3V lithium battery type CR2032 (included)
Size HxBxL: 110 x 30 x 16 mm

TECHNICAL SPECIFICATIONS RECEIVER

Codesystem Automatic
Max Wattage 3500 Watt
Memory addresses 32
Power 220-240VAC 50 Hz
Size HxBxL: 53 x 53 x 70 mm
IP-Rating IP-44

    Logo

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals