LG 32ML5K-B Digital Signage Display Owner’s Manual
- June 13, 2024
- LG
Table of Contents
LG 32ML5K-B Digital Signage Display
- Product Information:
- Product Name: LG Digital Signage (Monitor Signage)
- Model Number: 32ML5K
- Language: English
Table of Contents:
- Basic information
- Getting Ready
- Checking Before Installation
- Precautions for Use
- Product Specifications
- License Product
Usage Instructions:
- Basic:
- Checking the Accessories:
- Depending on the country, the accessories included with the product may vary. Please check the package contents to ensure that all necessary accessories are present.
- Learning the Buttons:
- The buttons on the product may differ depending on the model. Here are the functions of some common buttons: – Screen Button: Changes the input signal.
- Menu Button: Opens the main menu or saves the input selection and exits the menu.
- Up/Down Buttons: Adjusts settings up and down.
- Left/Right Buttons: Moves left or right. – Info Button: Shows the signal and mode information currently set and allows the user to select a menu.
- Getting Ready:
- Connecting the IR Sensors:
- To receive signals from the remote control, connect the cable to the product. Rotate the IR sensor according to horizontal or vertical use. The illustrations may differ depending on the model.
- Mounting and Removing the LG Logo Bracket:
- This step applies only to some models. Follow these instructions to remove or mount the LG logo bracket:
- Removing the LG Logo
Bracket:
-
Place a clean cloth on the floor to protect the monitor.
-
Use a screwdriver to remove one screw from the LG logo bracket on the lower back of the monitor.
- Mounting the LG Logo Bracket on the Right: 1. Screw the LG logo bracket into the hole on the right side of the monitor.
-
Checking Before Installation:
- Installation Orientation:
- When installing vertically, rotate the monitor 90 degrees anti-clockwise while facing the front of the screen. This step is applicable for ceiling or floor orientation as well.
- Installation Location:
- Follow the provided guide to choose the appropriate installation location for the product.
Improper installation may result in product damage.
-
Precautions for Use:
- Dust:
- Take precautions to prevent dust accumulation on the product, as it may affect its performance. Regular cleaning is recommended.
- Afterimage:
- Avoid displaying static images for extended periods, as it may cause afterimage or screen burn-in.
-
Product Specifications:
- Refer to the product manual for detailed specifications of the LG Digital Signage.
-
License:
- The license information related to the product is provided in this section.
Please refer to the complete user manual for more detailed instructions and additional information about the LG Digital Signage (Monitor Signage) model 32ML5K.
- The license information related to the product is provided in this section.
Please read the user manual before using this product to ensure safe and convenient use.
WARNING – This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
BASIC
NOTE
- The accessories provided with your product may vary depending on the model or region.
- Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
- SuperSign Software & Manual
- Visit http://partner.lge.com to download the latest SuperSign software and manual.
- For POE++ application, Cat5e or higher LAN cables must be used, and Cat6 and 23 AWG or higher cables are recommended.
- To meet the EMI standard, for LAN cables exposed to the outside of a wall, a cable of 2 m (6.5 feet) or less in length and FTP or STP grade must be used.
- When purchasing PSE equipment, it is necessary to purchase Class 6 (60 W) or higher, and for more stable performance, Class 7 (75 W) or higher is recommended. The length of the LAN cable must be 100 m (328 feet) or less. The longer the cable, the greater the power loss, so using the shortest possible cable is recommended.
Checking the Accessories
Learning the Buttons
The illustrations may differ depending on the model
: Changes the input signal.
: Opens the main menu or saves the input selection and exits the menu.
: Adjusts up and down.
: Moves left or right.
: Shows the signal and mode information currently set and allows the user to
select a menu.
: Turns the power on and off
GETTING READY
Connecting the IR Sensors
Connecting the cable to the product allows it to receive signals from the
remote control.
Rotate the IR sensor according to horizontal or vertical use.
- The illustrations may differ depending on the model.
Mounting and Removing the LG Logo Bracket
- Applies only to some models.
- The illustrations may differ depending on the model.
Removing the LG Logo Bracket
Place a clean cloth on the floor, and remove one screw from the LG logo
bracket on the lower back of the monitor with a screwdriver.
Mounting the LG Logo Bracket on the Right
Screw the LG logo bracket into the hole on the right.
CHECKING BEFORE INSTALLATION
We are not responsible for product damage caused by failure to follow the guide.
Installation Orientation
Using Vertically
When installing vertically, rotate the monitor 90 degrees anti-clockwise while
facing the front of the screen.
Tilt Angle
Ceiling, Floor Orientation
Installation Location
We are not responsible for product damage caused by failure to follow the guide.
Indoor
A: 40 mm (1.5 inches)or more
- The warranty will not cover any damage caused by using the product in direct sunlight on the front panel
Installing on a Recessed Wall
- A: 40 mm (1.5 inches) or more
- B: 50 mm (1.9 inches) or more
- C: 70 mm (2.7 inches) or more
- The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.
Outdoor
Wall Mount Holder
To install the monitor on a wall, attach a wall mount holder (optional) to the
back of the monitor.
Take caution, and ensure that the wall mount holder (optional) is securely
fixed to the monitor and to the wall.
The VESA dimensions of the wall mount by model are as follows.
Model| VESA Dimensions (A x B) (mm)|
Standard Dimensions| Length (Maximum) (mm)|
Quantity
---|---|---|---|---
__
__
__
32ML5K
| 200 x 200| M6| 21.3| 4
VESA Dimensions (A x B) (inches)| Standard
Dimensions| Length (Maximum) (inches)| Quantity
__
7.8 x 7.8
| __
M6
| __
0.8
| __
4
CAUTION
- Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
- If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
- Damage to the monitor by tightening the screws too tightly may void your warranty.
- Use screws and wall mount plates conforming to VESA standards. Breakage or personal injury due to use or misuse of inappropriate components is not covered by the warranty of this product.
NOTE
- Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
- For more information on installation, please refer to the user manual for the wall mount.
PRECAUTIONS FOR USE
Dust
The warranty will not cover any damage caused by using the product in an
excessively dusty environment.
Afterimage
- After-image appears when the product is turned off.
- Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screensaver function.
- Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause an afterimage. This is normal due to the display characteristics of this product.
- When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called an afterimage.
- Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed for a long time. The following are operational recommendations for reducing the occurrence of afterimages when using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better for preventing afterimages.
Recommended Usage Condition
- Change the background color and text color at equal intervals.
- Afterimages occur less when the colors to be changed are complementary to one another.
- Switch the screen at equal time intervals.
- Take caution, and ensure that text or images from before the screen change are not left in the same location after the screen change.
PRODUCT SPECIFICATIONS
Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
__
Input/Output Ports
| __
__
---|---
Resolution| Recommended Resolution| 1920 x 1080 @ 60 Hz (HDMI1,
HDMI2)
Max Resolution
Power Voltage| 120 V~ 50/60 Hz 0.7 A or
POE++ : 41.1-57.0 V 1.2 A
__
__
Environmental Conditions
| Operating Temperature
Operating Humidity
| 0 °C to 40 °C (32 °F to 104 °F)
10 % to 80 % (Condition for preventing condensation)
Storage Temperature Storage Humidity| -20 °C to 60°C (-4 °F to 140 °F)
5 % to 85 % (Condition for preventing condensation)
* Product box packaging storage conditions
Audio| Input Sensitivity| 0.7 Vrms
__
Power Consumption
| On Mode| 55 W (Typ.)
Sleep Mode / Standby Mode
(AC standard)
| ≤ 1.0 W
Model Name| Size (Width x Height x Depth) (mm)|
Weight (kg)
---|---|---
__
32ML5K
| 729.4 x 428.9 x 55.5| 5.7
Size (Width x Height x Thickness) (inches)| Weight
(lbs)
28.7 x 16.8 x 2.1| 12.5
HDMI (PC) Support Mode
Resolution| Horizontal Frequency (kHz)| Vertical
Frequency (Hz)| Note
---|---|---|---
800 x 600| 37.879| 60.317|
1024 x 768| 48.363| 60|
1280 x 720| 44.772| 59.855|
1280 x 1024| 63.981| 60.02|
1680 x 1050| 65.29| 59.954|
1920 x 1080| 67.5| 60|
HDMI (DTV) Support Mode
Resolution| Horizontal Frequency (kHz)| Vertical
Frequency (Hz)| Note
---|---|---|---
480/60p| 31.5| 60|
576/50p| 31.25| 50|
720/50p| 37.5| 50|
720/60p| 45| 60|
1080/50i| 28.1| 50|
1080/60i| 33.75| 60|
1080/50p| 56.25| 50|
1080/60p| 67.432| 59.94|
1080/60p| 67.5| 60|
Wireless module (LGSBWAC92) Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range (MHz)| Output power (Max.)
(dBm)
2400 to 2483.5
5150 to 5725
5725 to 5850
| 18
18
18
Bluetooth
Frequency range (MHz)| Output power (Max.)
(dBm)
2400 to 2483.5| 8
• As band channels can vary per country, the user cannot change or adjust
the operating frequency. This product is configured for the regional
frequency table.
• For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.
• FCC ID: BEJLGSBWAC92 / IC: 2703H-LGSBWAC92
LICENCE
Supported licenses may differ by model. For more information of the
licenses, visit www.lg.com.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress
and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby
Vision IQ, Dolby Audio, Dolby Atmos, and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under
license. Other trademarks and trade names are those of their respective
owners.
The model and serial number of the product are located on the back and on one
side of the product.
Record them below in case you ever need service.
Supplier’s Declaration of Conformity
Trade Name LG
Responsible Party LG Electronics USA, Inc.
Address 111 Sylvan Avenue, North Building,Englewood Cliffs, NJ 07632
E-mail Ig.environmental@lge.com
MODEL
SERIAL NO.
Temporary noise is normal when powering ON or OFF this device.
This product qualifies for ENERGY STAR®.
Changing the factory default configuration and settings or enabling certain
optional features and functionalities may increase energy consumption beyond
the limits required for ENERGY STAR® certification.
Refer to ENERGYSTAR.gov for more information on the ENERGY STAR® program.