SUNORA POS 01 STAND Universal Desktop Stand User Manual
- June 13, 2024
- SUNORA
Table of Contents
USER MANUAL
POS-01
Panel Size 166x(min70-max110)
Universal tabletop stand for POS terminals with tilt adjustment and horizontal rotation
| | | |
---|---|---|---|---
A (x1)| B (x1) | C (x1) | D (x1) |
E (x1)
| | | |
F (x2)
D6 | G (x4)
D5 | H (x1)
D12| I (x1)
M6 |
J (x2)
M4x10
| | | |
K (x1)
M6x36 | L (x1)
M12x35 | M (x4)
ST4.8×20 | N (x1)
10mm |
O (x1)
8mm
1
2
3
4
5
6
WARNING:
Failure to read, thoroughly understand, and follow all instructions can result
in serious personal injury, damage to equipment, or voiding of factory
warranty.
INSTRUCTIONS OF SAFETY AND WARNINGS:
- Make sure that the mounting surface is strong enough to handle a mounted product and equipment.
- DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY
- Always use an assistant or a mechanical lifting device to safely lift and position heavy products.
- Tighten screws firmly, but do not over tighten. Over tightening can cause product damage that greatly reduces the holding power.
- Keep a clear area and distance from moving parts when using the product.
- Use only as intended. Never stand, hang or climb on the product.
- This product is intended for indoor use only.
- Any attempts to reconstructs the construction aren’t allowed.
- This product may contain small items that could be a chocking hazard if shallowed. Keep children away unless the product is intended for their use and alla instructions and manuals are fully reviewed and understood by them.
- Check that the product is secure and safe to use at regular intervals (at least every three months).
Should you ever have any questions or feel you require help please contact your place of purchase for assistance.
Made In China ****
e-mail:Info@sun.gr – www.sonora.com.gr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>