CUBE G63 LED Wireless Bluetooth Speaker Instruction Manual

CUBE G63 LED Wireless Bluetooth Speaker Instruction Manual

Instructions for use of wireless charging speaker

1. Use of wireless charging: insert the charger to automatically start wireless charging
2. Short press a song Long press volume down
3. Short press pause/start Long press on/off
4. Short press the previous song Long press to increase the volume
5. Short press to control the light, long press to enter the clock settings (short press to toggle the light), set the alarm in long press (short press to switch the cursor)

Technical Parameter

Product model: G63
Battery type: polymer battery 300mA
Bluetooth scheme: Jaylie
Main functions: BT.TF.USB.AUX.
wireless charging, colored lights
Product size: 145mm59mm155mm
Speaker size: 36mm
Speaker resistance: 4Ω
Speaker output power: 3W
Wireless charging power : 5W
Power input: DC5V/2A

Key function operation instructions

Power on: press and hold the power on button for two seconds to start the machine, and the default warm light is on

Bluetooth function use:

This audio system supports the usc of Bluetooth devices with A2DP function.First, turn it on, and press and hold the M key to enterWhen the Bluetooth modeis entered, theblue light of the Bluctooth indicator light flashes, accompanied by voice prompt, and the audioIt is in the state of waiting for pairing connection.Only in this state can it be connected with Bluetooth audioPair and connect.

Mobile phone connection

Step 1: Open the Bluetooth setting switch in the mobile phone settings, and click Search Device
Step 2: When the G63 character is displayed on the available device,it means that the mobile phone has found the Bluetooth audio, click G63 enters the pairing mode. After the phone and audio are successfully paired, a voice prompt will be displayedShow connected

Light Use

1. G63 Bluetooth speaker is equipped with a varicty of lighting effects
2. The default light warming effect is when the device is turned on. Press and hold the M key and then press the light key to adjust the light

TF Card/U Disk Function Use:

Insert the TF card/U disk into the card slot, the corresponding voice prompt will appear,; and the product will automaically readThe audio file in the card is played,and the user can use the speaker “+/-”button to control the size of the music sound.

Safety Instructions:

1. Do not expose the product into the water or humid areas, such asbathrooms.
2. Please do not hit or drop the product hardly to avoid manual damage.
3. When not in use for a long time, please turn off the power.

Warranty and After Sales Service:

If you have any questions during use, please feel free lo contact us, we are responsible for every customer.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Radiation Exposure Statement for Bluetooth

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Radiation Exposure Statement for WPT This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of thedevicemust be respecte d.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>