AMANA ART104TFD Top Mount Refrigerator Instruction Manual
- June 13, 2024
- Amana
Table of Contents
AMANA ART104TFD Top Mount Refrigerator
Product Model Numbers
- ART104TFD
- ART106TFD
- ART316TFD
Electrical Requirements
A 115-volt, 60-Hz, AC only, 15- or 20-amp fused grounded electrical supply
is required. It is recommended that a separate circuit serving only your
refrigerator be provided. Use an outlet that cannot be turned off by a switch.
Do not use an extension cord.
Water Requirements
A cold water supply with water pressure between 30 and 120 psi (207 and 827
kPa) is required to operate the ice maker and water dispenser. If you have
questions about your water pressure, call a licensed, qualified plumber.
IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa). If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).
Product Dimensions
Model Number| Model Size| Depth – Reversible With Door| Cab. Width| Depth
Cabinet Only| Cab. Height| Overall Height
---|---|---|---|---|---|---
ART104TFD| 14.3 cu. ft.| Yes| 30″| 28″| 62.4 cm| 158.4 cm| 159.7 cm
ART106TFD| 16 cu. ft.| Yes| 28″| 65.7 cm| 166 cm| 167.3 cm
ART316TFD| –| –| –| 144.1 cm
Location Requirements
- To ensure proper ventilation for your refrigerator, allow for a 1/2″ (1.25 cm) space on each side. Allow 3″ (7.5 cm) of space between overhead cabinets and refrigerator top. Allow at least 1″ (25.40 mm) between the back of the cabinet and the wall. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.
- If you are installing your refrigerator next to a fixed wall, leave enough space on the hinge side to allow for the door to swing open.
- Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Specifications subject to change without notice.
For complete installation details and instructions, please refer to the Installation Instructions.
Ref. W10723054A 10/3/14
PRODUCT MODEL NUMBERS
- ART104TFD
- ART106TFD
- ART316TFD
Electrical:
A 115-volt, 60-Hz, AConly, 15- or 20-amp fused, grounded electrical supply
is required. It isrecommended that a separate circuit serving only your
refrigerator be provided. Use an outlet that cannot be turned off by a switch.
Do not use an extension cord.
Water:
A cold water supply with water pressure between 30 and 120 psi (207 and 827
kPa) is required to operate the ice maker and water dispenser. If you have
questions about your water pressure, call a licensed, qualified plumber.
IMPORTANT : The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).
Reverse Osmosis Water Supply:
If a reverse osmosis water filtration system is connected to your cold water
supply, the water pressure to the reverse osmosis system needs to be a minimum
of 40 to 60 psi (276 to 414 kPa).
PRODUCT DIMENSIONS
Model Number
| ****
Model Size
| ****
Reversible Door
| Depth – With Door “A”| Cab. Width “B”| Depth – Cabinet Only “C”| Cab. Height
“D”| Overall Height “E”| Depth Door Open 90° “F”
---|---|---|---|---|---|---|---|---
ART104TFD
| ****
14.3 cu. ft.
| ****
Yes
| 30″
(76.2 cm)
| 28″
(71.1 cm)
| 25¹⁄₄” (64 cm)| 62³⁄₈” (158.4 cm)| 62⁷⁄₈” (159.7 cm)| 56³⁄₄” (144.1 cm)
ART106TFD ART316TFD| ****
16 cu. ft.
| ****
Yes
| ****
31¹⁄₄” (79.4 cm)
| 28″
(71.1 cm)
| ****
25¹⁄₄” (64 cm)
| ****
65³⁄₈” (166 cm)
| ****
65⁷⁄₈” (167.3 cm)
| ****
56³⁄₄” (144.1 cm)
LOCATION REQUIREMENTS
To ensure proper ventilation for your refrigerator, allow for a 1⁄2″ (1.25 cm) space on each side. Allow 3″ (7.5 cm) of space between overhead cabinets and refrigerator top. Allow at least 1″ (25.40 mm) between back of cabinet and the wall. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave enough space on the hinge side to allow for the door to swing open.
NOTE : This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator. Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see the Installation Instructions packed with the product.
Specifications are subject to change without notice.
Ref. W10723054A 10/3/14
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>