SONODYNE SRP 500 Monitor Blac Speakers User Guide
- June 13, 2024
- SONODYNE
Table of Contents
SRP 500 Monitor Blac Speakers
User Guide
SRP 500 Monitor Blac Speakers
INSIDE THE SRP
-
ACOUSTIC WAVEGUIDE: Our quest into achieving off-axis linearity led us to design a unique waveguide for each SRP. The result is evident in the clear, detailed high frequency response over a wide sweet spot
-
UNIQUE ALUMINUM PRESSURE DIE CAST MOULDED ENCLOSURE: This monolithic, rigid casing eliminates colouration caused due to vibrations. The non-parallel edges minimize standing wave build-up. This results in a smooth and extended low frequency response and detailed midrange.
The cabinets are powder coated to ensure a durable yet aesthetically pleasing finish. Three colour options available are grey, white and black -
NEODYMIUM MAGNET HF TRANSDUCER: This specially designed tweeter has a lightweight neodymium magnet to minimize stray magnetic forces and to improve linearity. A unique rear cavity design yields a low resonance frequency that allows for a low crossover frequency and thereby improves directivity
-
KEVLAR CONE LF: The stiff woven fibre of the Kevlar cone minimizes cone breakup. Combined with a powerful motor system, this results in high grade performance both in terms of linearity and dynamics
-
DSP ENABLED BI-AMPLIFIER: The SRP models use a discrete amplifier for each transducer. These hefty class A/B Sonodyne amplifiers have oodles of power and headroom and provide a clean, undistorted signal. The DSP balance in SRP 500, 600, 800 ensures linearity both in frequency and time domains resulting in a detailed, natural sound. It also allows for calibrated gain and EQ controls
-
TOROIDAL TRANSFORMERS are used for quick, efficient operation and to minimize electromagnetic interference (EMI) and improved signal to noise ratio
-
RECESSED INLET FOR CABLES ensures hassle-free and clutter-free installation
-
WALL MOUNTS: These sturdy wall mount brackets allow for smooth motion and positioning in both horizontal and vertical planes
The SRP translates very well at low and high volume
- EDDIE KRAMER, Grammy Award winner The Beatles, David Bowie, Eric Clapton, Jimi Hendrix, Kiss, Led Zeppelin“ No mix is finished until I check it on a Son dyne
- TOM LORD ALGE, Grammy Award winner U2, The Rolling Stones, Peter Gabriel, Dave Matthews Band, Avril Lavigne They are powerful, well-balanced and honest to the ears, what more could one want!
- RECORDING MAGAZINE, USA These Sonodyne speakers sound amazing
- LESLIE BRATHWAITE, Grammy nominated mix engineer Beyonce, Jay Z, Madonna, T.I, Pharrell Williams, Akon For a little speaker it has an amazingly good bass response
- JOSH BLAIR, Producer/ Engineer Duran Duran, Bruno Mars, Beyonce You have to find your Sonodyne product for your taste, but you will never find a better product for the price.
- GEORGE NECOLA, Gearspace I was very impressed
- BOB POWER, Grammy Award winner Erykah Badu, A Tribe Called Quest, Citizen Cope, De La Soul, India Arie Sonodyne conveys sound in it’s purest form
- USTAD ZAKIR HUSSAIN, Indian tabla virtuoso As the crown jewel of the Indian hi-fi manufacturing industry, Sonodyne has been on top of its game for a while now.
- WHAT HiFi? India
SRP
350
The SRP 350 serves as an ideal reference for multimedia and high
quality multichannel audio in premium spaces. A 15W + 15W biamplifier is
optimally matched to the silk dome HF and glass fibre cone LF. Room
compensation HF and LF tilts are available on the rear along with a power
switch and level control.
| CABINET MATERIAL | Pressure die-cast aluminum |
|---|---|
| TRANSDUCER COMPLEMENTS | LF: Magnetically shielded 3″ glass fibre cone woofer |
HF: Magnetically shielded 26mm silk dome mounted on waveguide
FREQUENCY RESPONSE (±2dB)| 95Hz ~ 22kHz
MAX. LONG TERM SPL, HALF SPACE| 95dB
AMPLIFIER POWER BEFORE CLIPPING| LF: 15W, HF: 15W
DIMENSIONS (WxHxD) mm| 125 x 184 x 120
NET WEIGHT| 2.5kg
WALL BRACKET| SRP WB1
ON AXIS FREQUENCY RESPONSE HORIZONTAL DIRECTIVITY
VERTICAL DIRECTIVITY SRP 400 The SRP 400 is an excellent reference to understand how mixes translate to smaller speakers. The 4.5″ CURV cone woofer produces impressive bass and transient response. A 25W + 25 W biamplifier drives the transducers optimally with the maximum SPL measuring in at an impressive 100 dB. Room compensation HF and LF tilts are available at the rear
| CABINET MATERIAL | Pressure die-cast aluminum |
|---|---|
| TRANSDUCER COMPLEMENTS | LF: Magnetically shielded 4.5″ CURV cone woofer |
HF: Magnetically shielded 26mm silk dome with custom waveguide
FREQUENCY RESPONSE (±2dB)| 75Hz ~ 22kHz
MAX. LONG TERM SPL, HALF SPACE| 100dB
AMPLIFIER POWER BEFORE CLIPPING| LF: 25W, HF: 25W
DIMENSIONS (WxHxD) mm| 160 x 232 x 155
NET WEIGHT| 4.4kg
WALL BRACKET| SRP WB1
ON AXIS FREQUENCY RESPONSE HORIZONTAL DIRECTIVITY
VERTICAL
DIRECTIVITY
SRP 500
The SRP 500 excels at monitoring vocal effects and other such subtleties in
the mix. The silk dome tweeter is nested in a custom waveguide to produce on
and off axis linearity and a wide, detailed soundstage. The 5.25″ Kevlar
woofer produces deep bass and exceptional transient response. A new 50W + 50W
biamplifier drives the transducers optimally while providing adequate headroom
and dynamics. The maximum SPL measures in at an impressive 104dB
| CABINET MATERIAL | Pressure die-cast aluminum |
|---|---|
| TRANSDUCER COMPLEMENTS | LF: Magnetically shielded 5.25″ Kevlar cone woofer in |
die-cast chassis
HF: 26mm silk dome neodymium magnet tweeter with custom waveguide
FREQUENCY RESPONSE (±2dB)| 58Hz ~ 21kHz
MAX. LONG TERM SPL, HALF SPACE| 104dB
AMPLIFIER POWER BEFORE CLIPPING| LF: 50W, HF: 50W
DIMENSIONS (WxHxD) mm| 210 x 279 x 181
NET WEIGHT| 6.8kg
WALL BRACKET| SRP WB2
ON AXIS FREQUENCY RESPONSE
HORIZONTAL
DIRECTIVITY
VERTICAL DIRECTIVITY SRP 600
The SRP 600 adds loudness, clarity and
bottom end to the compact SRP 500. The silk dome tweeter is nested in a custom
waveguide to produce on and off axis linearity and a wide, detailed
soundstage. The 6.5″ Kevlar woofer produces deep bass and exceptional
transient response. A new 80W + 50W biamplifier drives the transducers
optimally while providing adequate headroom and dynamics. The maximum SPL
measures in at an impressive 107dB
| CABINET MATERIAL | Pressure die-cast aluminum |
|---|---|
| TRANSDUCER COMPLEMENTS | LF: Magnetically shielded 6.5″ Kevlar cone woofer in |
die-cast chassis
HF: 26mm silk dome neodymium magnet tweeter with custom waveguide
FREQUENCY RESPONSE (±2dB)| 48Hz ~ 21kHz
MAX. LONG TERM SPL, HALF SPACE| 107dB
AMPLIFIER POWER BEFORE CLIPPING| LF: 80W, HF: 50W
DIMENSIONS (WxHxD) mm| 250 x 340 x 240
NET WEIGHT| 11.9kg
WALL BRACKET| SRP WB2
ON AXIS FREQUENCY RESPONSE HORIZONTAL DIRECTIVITY VERTICAL DIRECTIVITY
SRP 800
The SRP 800 is excellent for loud monitoring
without any audible loss in detail. The silk dome tweeter is nested in a
custom waveguide to produce on and off axis linearity and a wide, detailed
soundstage. The 8″ Kevlar woofer produces deep bass and exceptional transient
response. A new 175W + 100W bi-amplifier drives the transducers optimally
while providing adequate headroom and dynamics. The maximum SPL measures in at
an impressive 112dB
| CABINET MATERIAL | Pressure die-cast aluminum |
|---|---|
| TRANSDUCER COMPLEMENTS | LF: Magnetically shielded 8″ Kevlar cone woofer in |
die-cast chassis
HF: 26mm silk dome neodymium magnet tweeter with custom waveguide
FREQUENCY RESPONSE (±2dB)| 42Hz ~ 22kHz
MAX. LONG TERM SPL, HALF SPACE| 112dB
AMPLIFIER POWER BEFORE CLIPPING| LF: 150W, HF: 100W
DIMENSIONS (WxHxD) mm| 291 x 434 x 280
NET WEIGHT| 17kg
WALL BRACKET| SRP WB3
ON AXIS FREQUENCY RESPONSE HORIZONTAL DIRECTIVITY VERTICAL
DIRECTIVITY
The detailed tops end of the SM 100s
translate extremely well when I get to the mix theatre
~ Nakul Kamte,
Bollywood’s Top Sync Sound Engineer, National Award winner
The representation of the stereo field is extremely accurate even
in small rooms.
I use them to produce, mix and record for Kool Saves, Pimm, Moe Mitchell and
other German-speaking artists from the genres Hip Hop, Pop and R&B.
~ Jannic Chopty
Getting the mid range well balanced is a
big part of mastering. This is is where the Sonodyne’s shine. They also have
great high frequency response and have a surprising amount of low end for such
small speakers … Can’t live without them at this point.
~ Pablo Infinity
For the first time I am hearing
resonant tones from my keyboard and the piano tones sound so life like. When I
listen to music on these I can hear every single instrument as if it was being
played right in front of my ears. I cannot recommend these studio monitors
enough!
~ Pradyumna (Paddy) Manot
It’s unbelievable how such small monitors can show the
entire music spectrum in such natural way, not just the middle frequencies
without reference to the rest of the frequency response…
~ Marek Romanowski
No more second guessing any of my decisions because if it sounds good through
my SRP400’s, it will sound good everywhere else. Highly recommend these
expertly crafted speakers to anyone looking to save hours getting the mix
right he FIRST time!
~ Mateen Ansari The Sonodynes don’t lie. They give you a true
representation of your source, which in turn helps you get the best results on
your mixes.
~ Thejus Nair
response@sonodyne.com
www.sonodyne.com
Made in India
Since 1970
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>