CPS IAQPRO Professional Indoor Air Quality Meter User Guide
- June 13, 2024
- CPS
Table of Contents
CPS IAQPRO Professional Indoor Air Quality Meter
Product Information
The Professional Indoor Air Quality Meter, model IAQPRO, is a device designed to measure and monitor the air quality indoors. It utilizes patented wireless technology (Patent #9,043,161) and requires the CPSLinkPro app version 12.0 or higher to function. For detailed instructions and additional information, please refer to the IAQPRO Owner’s Manual available at cpsproducts.com.
Product Usage Instructions
- If the IAQPRO has been stored in temperature extremes, place it indoors, unplugged, under normal conditions for 6-8 hours before use.
- Connect the IAQPRO to a power source indoors.
- Register the device according to the on-screen instructions.
- Follow the on-screen instructions to set the baseline.
- Enter contractor information.
- The setup is complete.
- To start an indoor air quality test, navigate to the “Devices” screen and touch to view live readings.
- Specify any issues, causes, and solutions according to the on-screen instructions to generate a report with prices.
- The default time for an indoor air quality test is 30 minutes.
- Note that each time the IAQPRO is turned on, the VOC sensor must warm up for 5-60 minutes. The housing light bar will flash green/yellow and then solid green when ready.
Contact information for CPS Products:
- CPS Products, Inc. (USA):
- Tel: 305-687-4121, 1-800-277-3808,
- E-mail: [email protected].
- CPS Products Canada Ltd.:
- Tel: 905.615.8620,
- E-mail: [email protected].
- CPS Products N.V. (Belgium):
- Tel: (323) 281 30 40,
- E-mail: [email protected].
- CPS Australia Pty. Ltd.:
- Tel: +61 8 8340 7055,
- E-mail: [email protected].
For the latest version of this guide, the complete Owner’s Manual, or other product information, visit cpsproducts.com.
Download App Now
INSTALLATION
-
Please read the IAQPRO Owner’s Manual (at cpsproducts.com).
-
If the IAQPRO has been stored in temperature extremes, place the it INDOOR, UNPLUGGED under normal conditions for 6~8 hours before use.
-
INDOOR (CONNECTED TO POWER)
-
FOLLOW ON-SCREEN INSTRUCTIONS
-
ENTER CONTRACTOR INFORMATION
-
REGISTER DEVICE
-
SET BASELINE
-
SET UP COMPLETE
-
DEVICES SCREEN
Touch to view live readings. -
DASHBOARD SCREEN
Start an Indoor Air Quality Test. -
INDOOR AIR QUALITY TEST
Default Time is 30 Minutes. -
SPECIFY ISSUES, CAUSES, SOLUTIONS
Follow on-screen instructions for generating a report with prices.
-
NOTE: Each New Time the IAQPRO is Turned ON, the tVOC Sensor Must Warm Up (5 ~ 60 Minutes). The Housing Light Bar will flash Green/Yellow, then solid GREEN when ready.
CONTACT
- CPS PRODUCTS, INC. U.S.A.
- 1010 East 31st Street, Hialeah, Florida 33013, USA
- Tel: 305-687-4121, 1-800-277-3808
- Fax: 305-687-3743
- E-mail: [email protected].
- Website: www.cpsproducts.com.
- CPS PRODUCTS CANADA LTD.
- 1324 Blundell Road Mississauga, ON, L4Y 1M5
- Tel: 905.615.8620
- Fax: 905.615.9745
- E-mail: [email protected].
- Website: www.cpsproducts.com.
- CPS PRODUCTS N.V
- Entrepotstraat 3, 9100 Sint-Niklaas, Belgium
- Tel: (323) 281 30 40,
- Fax: (323) 281 65 83
- E-mail: [email protected].
- Website: www.cpsproducts.be.
- CPS AUSTRALIA PTY. LTD.
- 109 Welland Avenue, Welland, South Australia 5007
- Tel: +61 8 8340 7055,
- Fax: +61 8 8340 7033
- E-mail: [email protected].
- Website: www.cpsproducts.com.au.
- For the latest version of this Guide (or the complete Owner’s Manual), or other product information: www.cpsproducts.com.
- Model: IAQPRO
- Latest Updates At www.cpsproducts.com.
- Patented Wireless Technology
- Version 12.0 or
- Patent #9,043,161
