anko 43-140-732 Nail Trimmer Instruction Manual

June 4, 2024
Anko

anko 43-140-732 Nail Trimmer

anko-43-140-732-Nail-Trimmer-PRODUCT

WARNING

  • The following persons should not use this appliance: pregnant women or while nursing; children; persons with skin inflammation on the fingers or toes; persons with allergies; persons with reduced physical, sensory or mental skills.
  • Immediately stop using the appliance and consult a doctor if you feel unwell.
  • Do not use the appliance for any purpose other than nail care.
  • Do not attempt to modify, disassemble or repair the appliance by yourself.
  • WARNING! Do not look directly at the UV light.

CAUTION

  • REMOVE BATTERIES FROM THE ITEM WHEN NOT IN USE FOR AN EXTENDED TIME OR WHEN THE BATTERIES BECOME EXHAUSTED. THIS APPLIANCE IS NOT
  • INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING THE USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY.
  • IT MUST ONLY BE SUPPLIED AT SAFETY EXTRA LOW VOLTAGE CORRESPONDING TO THE MARKING ON THE APPLIANCE.

Product Components

anko-43-140-732-Nail-Trimmer-FIG-1

Interchangeable Heads For Different Ages

anko-43-140-732-Nail-Trimmer-FIG-2

  • Super Fine Grinding Head (Yellow) 0-3 months Soft Disc Pad
  • Fine Grinding Head (Coral) 4-11 months Medium Disc Pad
  • Coarse Grinding Head (Teal) 12+ months Hard Disc Pad
  • Cylindrical Grinding Head Smoothes the edges of nails
  • Soft Metal Grinding Head Removes the dead skin and calluses from around nails
  • Soft Polishing Head Polishes and removes the dead skin at the base of nails

Instructions

anko-43-140-732-Nail-Trimmer-FIG-3

  • Insert 2 x AA batteries (not included)3
  • Choose grinding head suitable to baby’s age
  • Attach the grinding head to the interchangeable end of the unit. To change the current head, pull it off the unit and replace it with desired head
  • Hold your baby’s finger/toe and select the appropriate speed

Modes

  • R2 ~ Rotates clockwise on high speed
  • R1 ~ Rotates clockwise on low speed
  • L1 ~ Rotates anti-clockwise on low speed
  • L2 ~ Rotates anti-clockwise on high speed
  • L0 ~ off mode

CARE INSTRUCTIONS

  • CASE: Wash with warm soapy water and rinse with clear water.
  • INTERCHANGEABLE HEADS: Clean with a cotton wad dampened in disinfectant.

BATTERY PRECAUTIONS

BATTERIES ARE TO BE INSERTED WITH THE CORRECT POLARITY (+ AND -). DO NOT MIX DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES. NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED BY AN ADULT. RECHARGEABLE BATTERIES ARE TO BE REMOVED FROM THE ITEM BEFORE BEING CHARGED. THE SUPPLY TERMINALS ARE NOT TO BE SHORT-CIRCUITED. REMOVE BATTERIES FROM THE ITEM WHEN NOT IN USE FOR EXTENDED TIME OR WHEN BATTERIES BECOME EXHAUSTED. BATTERY INSTALLATION BY AN ADULT IS REQUIRED. DISPOSE OF BATTERIES RESPONSIBLY. DO NOT DISPOSE OF IN FIRE.

NOTE:
THIS PRODUCT IS NOT A TOY. DO NOT ALLOW CHILDREN TO PLAY WITH IT.

RECYCLING
Batteries contain substances harmful to our environment. Do not dispose of the appliance with the batteries inserted. Remove the batteries and take the product to your local council recycling point for environmental protection.

Troubleshooting

Problem Possible Cause Solution
Not working Batteries incorrectly installed Reinstall batteries correctly
Low battery power Install new batteries
Abnormal noise Grind head incorrectly installed Remove and reinstall the

grinding head correctly

Poor manicure result

| Low battery power| Install new batteries
Incorrect grinding head| Replace with the correct

grinding head

KEYCODE: 43-140-732

MADE IN CHINA

  • FOR AU / NZ: IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND. KMART CUSTOMER SERVICE:
  • AU: 1800 124 125
  • NZ: 0800 945 995

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals