iLIVE IAHRF79 RF Wireless Headphones User Guide

iLIVE IAHRF79 RF Wireless Headphones

Product Information

The Model IAHRF79 v2258-01 is a wireless headphone system that allows you to enjoy your favorite music or TV shows while moving around the house. It provides excellent reception and freedom of movement.

Features

• LED Indicator
• Power/Pair Button
• Volume Control
• Aux In (3.5mm audio input)
• Micro-USB DC Charging Port
• Headphone Charging Contacts
• Charging Contacts (Base)
• LED Indicator (Base)

Included Accessories

• Digital Optical Audio Cable
• 3.5mm to RCA stereo audio cable adapter
• 3.5mm audio cable

Product Usage Instructions

Base Power

1. Connect the DC Power Input on the base to a standard power outlet using a DC Power Adapter (included).
2. The base must be connected to a power source and powered ON to transmit audio to the headphones.

Headphone Charging

There are two ways to charge the headphones:

1. Connect the Micro-USB DC Charging Port on the headphones to the USB port on a powered-on computer or USB power adapter (not included).
2. A fully charged battery will provide up to 7 hours of playtime. Battery life will improve at lower volume levels and decrease at higher volume levels.
3. Headphone & Base Indicator Light:
   • Red light ON: Charging battery
   • Light OFF: Charging complete

Connecting Audio

Digital Optical Audio

1. Requires a media source with an Optical Audio Output and a Digital Optical Audio Cable (included).
2. Using a Digital Optical Audio Cable, connect the Optical Output on your media source (TV, amplifier, etc.) to the Optical Input on the base.
3. On the connected media source (TV, amplifier, etc.), make sure the audio settings are set to PCM or Optical Audio.
4. Audio played through the connected media source (TV, amplifier, etc.) will now be sent through the base.

RCA Stereo Audio

Requires a 3.5mm to RCA stereo audio cable adapter and a 3.5mm audio cable (included). When connecting an RCA stereo audio cable (Red/White), match the colored plugs to their corresponding ports.

SAFETY WARNINGS

• WARNING: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
• Risk of electric shock. Grounding continuity must be maintained.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• Only use the included power supply or a UL/ETL certified power supply of the same power output specifications.
• To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.

WARNING : This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov This product meets and complies with all Federal regulations.

FCC

WARNING : To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

INTRODUCTION

Trying to do some around-the-house chores and still want to listen to the TV or your favorite music? These wireless headphones allow freedom of movement while maintaining excellent reception.

Features

• Digital 2.4GHz wireless connection
• Up to 100ft transmission distance without line of sight limitations
• Compatible with any media device with a 3.5mm audio output, digital optical audio output, or coaxial output
• No voice or picture latency
• Comfortable, noise isolating earcups
• Rich sound and deep bass
• Fold-flat design for convenience on-the-go
• Transmitter base also serves as a charging dock for the headphones
• Built-in rechargeable battery: approx. 7 hour battery life

Includes

• Optical audio cable
• 3.5mm stereo audio cable
• RCA to 3.5mm stereo audio adapter cable
• Micro-USB charging cable
• AC/DC power adapter
• User’s Guide
• Warranty

OVERVIEW

Headphones

1. LED Indicator

2. Power/Pair Button

3. Volume Control

4. Aux In (3.5mm audio input)

5. Micro-USB DC Charging Port

6. Headphone Charging Contacts
   Base

7. Charging Contacts

8. LED Indicator

Control Functions

• Power
  Press and hold to power ON and OFF.

• Pair
  Press to pair to the headset base (see pg. 14 for the pairing procedure).

• Volume
  Press up or down to adjust the volume level.

LED Indicator Lights

• Headphone Functions
  Flashing Blue – Wi-Fi connecting Solid Red – Battery charging

• Base Functions
  Solid Red – Charging headphones Solid Blue – Media source connected Flashing Blue – Media source not connected

SETUP

Base Power

• Connect the DC Power Input on the base to a standard power outlet using a DC Power Adapter (included).
• The base must be connected to a power source and powered ON to transmit audio to the headphones.

Headphone Charging

There are two ways to charge the headphones.

• Place the headphone on the base so that the charging contacts are aligned.
• Use a Micro-USB to USB cable (included) to connect the DC Input (Micro-USB) on the headphones to the USB port on a powered on computer or USB power adapter (not included).

A fully charged battery will provide up to 7 hours of playtime. Battery life will improve at lower volume levels and decrease at higher volume levels .

CONNECTING AUDIO

Digital Optical Audio

Requires a media source with an Optical Audio Output and a Digital Optical Audio Cable (included).

1. Using a Digital Optical Audio Cable, connect the Optical Output on your media source (TV, amplifier, etc.) to the Optical Input on the base.
2. On the connected media source (TV, amplifier, etc.), make sure the audio settings are set to PCM or Optical Audio.
3. Audio played through the connected media source (TV, amplifier, etc.) will now be sent through the base.

Important tips for optical audio:

• Use the correct Optical cable and make sure that it is firmly seated in the Optical Input/Output sockets on the base and the media source.
• Optical audio output is activated from the media source (a red light should be visible from the Optical socket). It may be labeled SPDIF in the setting menu of the source.
• The optical output source should be set to output PCM and not Dolby Digital.

RCA Stereo Audio

Requires a 3.5mm to RCA stereo audio cable adapter and a 3.5mm audio cable (included). When connecting an RCA stereo audio cable (Red/White), match the colored plugs to their corresponding ports.

1. Using a 3.5mm to RCA Stereo Audio Cable (included), connect the RCA Stereo Output on your media source (TV, amplifier, etc.) to the Aux In (3.5mm audio input) on the base.
2. Audio played through the connected media source (TV, amplifier, etc.) will now be sent through the base.

Coaxial Audio

Requires a media source with a Coaxial Audio Output and a Coaxial Audio Cable (not included).

1. Using a Coaxial Audio Cable, connect the Coaxial Output on your media source (TV, amplifier, etc.) to the Coaxial Input on the base.
2. On the connected media source (TV, amplifier, etc.), make sure the audio settings are set to Coaxial Output.
3. Audio played through the connected media source (TV, amplifier, etc.) will now be sent through the base.

Line In
Requires a 3.5mm audio cable (included).

1. Connect a 3.5mm audio cable to the Line In on the base or the headphones and the audio output/headphone jack on an audio device.

LISTENING

Pairing the Headphones to the Base

Note : After the initial pairing, the headphones will stay paired to the transmitter base. It will not be necessary to reconnect each time you use the headphones.

1. Press and hold the Power/Pair button to power on the headphones.
2. Press the Power/Pair button again to begin pairing. The headphones will automatically detect the base and connect to it.
3. After a successful connection, the LED on the headphones will slowly blink blue. The LED on the base will turn solid blue.
4. When you are finished using the headphones, press and hold the Power/ Pair button to power them off, then place them on the base to charge the batteries while not in use.

TROUBLESHOOTING

PROBLEM                  POSSIBLE SOLUTION

Unit will not power on| » Make sure the headphones’ battery is charged. Recharge if needed.
Audio distortion| » Volume on the headphones or the connected device may be too high. Reduce the volume of one or both of the devices.
Headphones won’t play or fails to connect| » Make sure the volume on the headphones is turned up to an audible level.

» Make sure the headphones’ battery is charged and they are powered on.

» Stay within 3 ft. of the headphones when pairing to the transmitter base.

» Stay within 50 ft. of the transmitter base.

White noise/ Headphones will not function properly| » Power the headphones OFF, then ON again.

CUSTOMER SUPPORT

Contact Information

• Website : www.iLiveElectronics.com
• Email Support : [email protected]
• Email Parts : [email protected]
• Phone Support: 1-888-999-4215

Warranty Information
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com.

International Support
To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com

Protect for Today Sustain for Tomorrow
Copyright © 2019 Digital Products International (DPI, Inc.)
All other trademarks appearing herein are the property of their respective owners

References

• P65Warnings.ca.gov
• iLive | Mobile Accessories, Digital Sound Systems, Electronics
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>