D A S Vantec Series 12 Inch 2 Way 1500W Speaker User Manual
- June 13, 2024
- D A S
Table of Contents
Vantec Series 12 Inch 2 Way 1500W
Speaker
User Manual
Before operating the device, please read the “Safety precautions” section of this manual. Retain this manual for future reference.
Safety Precautions
Keep these instructions.
Heed all warnings. Follow all instructions.
The exclamation point inside an equilateral triangle indicates the existence
of internal components whose substitution may affect safety.
The double square indicates Class II device. The specifications can be found
on the rear label of the product.
The appliance should be flown only from the rigging points and by qualified
personnel. Do not suspend the box from the handles.
Do not expose this device to rain or moisture. Do not place any objects
containing liquids, such as bottles or glasses, on the top of the unit. Do not
splash liquids on the unit. IP-20 equipment.
This symbol on the product indicates that this product should not be treated
as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment.
Working temperature ranges from -25ºC to 45ºC. The maximum relative humidity
of 95%.
The outer wiring connected to the device requires installation by an
instructed person or the use of a flexible cable already prepared.
Note that the two Speak on input connectors are wired in parallel to provide
easy parallel connection of several enclosures.
Do not place loudspeakers in proximity to devices sensitive to magnetic fields
such as television monitors or data storage magnetic material.
For enclosures with tripod socket, the maximum safety height from floor to
bottom of enclosure when mounting on a TRD-2 tripod, with legs spread 55cm
from the central pole, is:
vantec-12 ————->115 cm
vantec-15 ————->105 cm
No user serviceable parts inside. Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally or has been dropped. Clean only with a
dry cloth. Do not use any solvent based cleaners.
WARRANTY
All D.A.S. products are warrantied against any manufacturing defect for a
period of 2 years from date of purchase.
The warranty excludes damage from incorrect use of the product. All warranty
repairs must be exclusively undertaken by the factory or any of its authorised
service centers.
To claim a warranty repair, do not open or intend to repair the product.
Return the damaged unit, at shippers risk and freight prepaid, to the nearest
service center with a copy of the purchase invoice.
DECLARATION OF CONFORMITY
D.A.S. Audio, S.A. C/ Islas Baleares, 24 – 46988 – Pol. Fuente del Jarrod –
Valencia. Espino (Spain).
Declares that vantec series:
Abide by essential objectives relating Directives:
Directive RoHS | 2011/65/CE |
---|---|
Directive RAEE (WEEE) | 2002/96/CE |
In accordance with Harmonized European Norms:
-
EN 60065:2002
Audio, video and similar electronic apparatus. Safety requirements. -
EN 55103-1:2009
Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 1: Emission. -
EN 55103-2:2009
Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Part 2: Immunity.
INTRODUCTION
The Vantec series inherits the exceptional sound quality and rugged build that
have made DAS professional systems an international sound reinforcement
standard. Designed from “real world” experience, they offer users outstanding
performance, absolute reliability, and unparalleled convenience. Whether it is
in a high-profile venue or on the stage of a major event, the Vantec series
will provide the power and definition needed to make your performance a
success.
Features vantec 12
- Two-way full-range system
- 12″ bass loudspeaker
- Compression driver with titanium diaphragm
- Symmetric enclosure design for stage monitor use
- Built-in rigging points (eyebolt based)
- Stand mountable
The Vantec 12 is a 2-way passive full-range loudspeaker that utilizes a 12” low frequency transducer and a 1” exit compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an environmentally friendly black paint finish. Two bar handles and a steel grille are provided. A 35mm tripod socket allows for stand mounting with two possible angles 0º or 10º.c vantec 15
- Two-way, full-range system
- 15″ bass loudspeaker
- Compression driver with titanium diaphragm
- Symmetric enclosure design for stage monitor use
- Built-in rigging points (eyebolt based)
- -Stand mountable
This 2-way passive full-range loudspeaker utilizes a 15” low frequency transducer and a 1” exit compression driver with titanium diaphragm. The cabinet is constructed of Birch plywood and finished with an environmentally friendly black paint finish. Two bar handles are provided and a steel grille protects components. A 35 mm tripod socket allows for stand mounting with two possible angles 0º or -10º. Rigging points provide a safe and simple solution for suspending the vantec 15. vantec 215
- Two-way, full-range system
- 2 x 15″ bass loudspeaker
- Compression driver with titanium diaphragm
- Built-in rigging points (eyebolt based)
The vantec 215 is a 2-way passive full range loudspeaker utilizes two 15” bass loudspeakers for extra low frequency punch and higher SPL. High frequencies are handled by a 1” compression driver with titanium diaphragm. The trapezoidal cabinet is constructed using Birch plywood and protected with a hard-wearing black paint finish. Two bar handles and a steel grille sealed against corrosion using a polyamide powder coat finish are provided. Rigging points provide a safe and simple way to fly the vantec 215 cabinets.
vantec 18
- Bass-reflex subwoofer system
- 18″ low frequency transducer
- Precise and powerful bass reproduction
- Top located pole mount socket
The vantec 18 bass system incorporates a 18” low frequency transducer with a 4 ” voice coil mounted as a direct radiator into a bass-reflex cabinet. The loudspeaker is protected by a perforated steel grille, sealed against corrosion using a powder coat finish. The vantec 18 is designed for use in beamed systems. A top located pole-mount socket permits mounting fullbring systems above the Vantec 18 and two bar handles makes moving easy.
CONFIGURATIONS
VANTEC 18
D.A.S. Audio, s.a. (Valencia), MADE IN SPAIN
PROGRAM POWER | 2000 W |
---|---|
RMS POWER | 1000 W |
IMPEDANCE | 8 Ω |
FREQUENCY RANGE | 45 Hz – 138 Hz |
VANTEC 12
D.A.S. Audio, s.a. (Valencia), MADE IN SPAIN
PROGRAM POWER | 1000 W |
---|---|
RMS POWER | 500 W |
IMPEDANCE | 8 Ω |
FREQUENCY RANGE | 65 Hz – 20 kHz |
VANTEC 15
D.A.S. Audio, s.a. (Valencia), MADE IN SPAIN
PROGRAM POWER | 1000 W |
---|---|
RMS POWER | 500 W |
IMPEDANCE | 8 Ω |
FREQUENCY RANGE | 60 Hz – 20 kHz |
CONFIGURATIONS (cont’d) VANTEC 18
D.A.S. Audio, s.a. (Valencia), MADE IN SPAIN
PROGRAM POWER | 2000 W |
---|---|
RMS POWER | 1000 W |
IMPEDANCE | 8 Ω |
FREQUENCY RANGE | 45 Hz – 138 Hz |
CONFIGURATIONS (cont’d)
VANTEC 215
D.A.S. Audio, s.a. (Valencia), MADE IN SPAIN
PROGRAM POWER | 2000 W |
---|---|
RMS POWER | 1000 W |
IMPEDANCE | 4 W |
FREQUENCY RANGE | 55 Hz – 20 kHz |
CONFIGURATIONS (cont’d)![D A S Vantec Series 12 Inch 2 Way 1500W Speaker
- CONFIGURATIONS 2](https://manuals.plus/wp-content/uploads/2023/10/D-A-S -Vantec-Series-12-Inch-2-Way-1500W-Speaker-CONFIGURATIONS-2.png)
LINE DRAWINGS
SPECIFICATIONS
Model | vantec 12 | vantec 15 | vantec 215 | vantec 18 |
---|---|---|---|---|
Peak Power Handling (-10 dB) | 2000 W | 2000 W | 4000 W | 4000 W |
RMS Power Handling | 500 W | 500 W | 1000 W | 1000 W |
Frequency Range (-10 dB) | 65 Hz – 20 kHz | 60 Hz – 20 kHz | 55 Hz – 20 kHz | 45 |
Hz – 138 Hz
HF Horn Coverage Angles(-6dB)| 90º x 50º| 90º x 50º| 90º x 50º| 90º x 50º
On-axis Sensitivity 1 W / 1m| 98 dB SPL| 99 dB SPL| 102 dB SPL| 98 dB SPL
Rated Maximum Peak SPL| 135 dB| 135 dB| 138 dB| 134 dB
Nominal Impedance| 8 ohms| 8 ohms| 4 ohms| 8 ohms
Transducers/Replacement Parts| LF: 12F / GM 12F
HF: M-28 / GM M-28| LF: 15F / GM 15F
HF: M-28 / GM M-28| LF: 2x 15F / GM 15F
HF: M-28 / GM M-28| LF: 12F / GM 12F
HF: M-28 / GM M-28
Enclosure Material| Birch Plywood| Birch Plywood| Birch Plywood| Birch Plywood
Color/Finish| Black ISO-flex Paint| Black ISO-flex Paint| Black ISO-flex
Paint| Black ISO-flex Paint
Connectors| 2x NL4 Speak on| 2x NL4 Speak on| 2x NL4 Speak on| 2x NL4 Speak on
Dimensions (H x W x D)| 61 x 38 x 37.5 cm
24 x 15 x 14.8 in| 71 x 44.4 x 37.5 cm
28 x 17.5 x 14.8 in| 108 x 44.4 x 50.2 cm
42.5 x 17.5 x 19.8 in| 71 x 54 x 65 cm
42.5 x 21.3 x 25.6 in
Weight| 19 kg (41.8 lb)| 22.8 kg (50.2 lb)| 40 kg (88 lb)| 35 kg (77 lb)
Accessories| ANL-2 Eye Bolt
TRD-2 Speaker Stand
TRD-6 Pole Mount| ANL-2 Eye Bolt
TRD-2 Speaker Stand
TRD-6 Pole Mount| ANL-2 Eye Bolt| ANL-2 Eye Bolt
TRD-6 Pole Mount
Notes: (1) Based on a 2 hour test continuously applying 6 dB crest factor
pink noise (IEC shaped).
D.A.S. Audio S.A. continuously strives to enhance its products through
investigation and development. All specifications are subject to change
without prior warning.
RIGGING
Warnings
This manual contains needed information for flying D.A.S. Audio cabinets,
description of the elements and safety precautions. To perform any operations
related to flying the system, read the present document first, and act on the
warnings and advice given. The goal is to allow the user to become familiar
with the mechanical elements required to fly the acoustic system, as well as
the safety measures to be taken during set-up and teardown.
Only experienced installers with adequate knowledge of the equipment and
local safety regulations should fly speaker boxes. It is the user’s
responsibility to ensure that the systems to be flown (including flying
accessories) comply with state and local regulations.
The working load limits in this manual are the results of tests by independent
laboratories. It is the user’s responsibility to stay within safe limits. It
is the user’s responsibility to follow and comply with safety factors,
resistance values, periodical supervisions and warnings given in this manual.
Product improvement by means of research and development is on going at D.A.S.
Specifications are subject to change without notice.
To this date, there is no international standard regarding the flying of
acoustic systems. However, it is common practice to apply 5:1 safety factors
for enclosures and static elements. For slings and elements exposed to
material fatigue due to friction and load variation the following ratios must
be met; 5:1 for steel cable slings, 4:1 for steel chain slings and 7:1
polyester slings. Thus, an element with a breaking load limit of 1000 kg ay
be statically loaded with 200 kg (5:1 safety factor) and dynamically loaded
with 142 kg (7:1 safety factor).
When flying a system, the working load must be lower than the resistance of
each individual flying point in the enclosure, as well as each box. Hanging
hardware should be regularly inspected and suspect units replaced if in doubt.
This is important to avoid injury and absolutely no risks should be taken in
this respect. It is highly recommended that you implement an inspection and
maintenance program on flying elements, including reports to be filled out by
the personnel that will carry out the inspections. Local regulations may exist
that, in case of accident, may require you to present evidence of inspection
reports and corrective actions after defects were found.
Absolutely no risks should be taken with regards to public safety. When flying
enclosures from ceiling support structures, extreme care should be taken to
assure the load bearing capabilities of the structures so t at the
installation is absolutely safe. Do not fly enclosures from unsafe structures.
Consult a certified professional if needed. All flying accessories that are
not supplied by D.A.S. Audio are the user’s responsibility. Use at your own
risk.
Introduction
Flyable Vantec series models feature 6 internal steel angles, with 2 mounting
threads each, so that 12 flying points are available (2 on each side, 3 on the
top panel and 3 on the bottom panel and 2 on the rear panel). Eyebolt flying
points are factory sealed with M10 screws, which are replaced with eyebolts on
the flying points as required. Flying with eyebolts is very economical and
safe, and is specially recommended for fixed installations where the boxes are
permanently fixed.
The illustration shows the internal metal hardware of an enclosure with
eyebolt flying. Flying with eyebolts
The Allen-head screws must be removed and replaced by M10 eyebolts on one
side of the enclosure. Each rigging point has 200 kg (440 lb) working load
limit. Then choose the slings or chains of required load resistance and
length, bearing in mind that the length difference between the front and back
slings or chains will determine the vertical orientation. Alternatively, the
back bottom eyebolt points can be used to rovide
vertical orientation.
The ANL-2 set is an optional set of four eyebolts and four carabiners.
(Dimensions are in millimeters). Each ANL-2 eyebolt has a rated working load
of 200 kg. (440 lb). Each ANL-2 carabiner has a working load of 330 kg (726
lb). If using other hardware, make sure it is rated to handle the required
load.
When using eyebolts it is important to bear in mind that the rated working
load is only true for a load applied in the plane of the eye, and is
significantly reduced for other angles. The drawing illustrates the concept.
The table shows the variation of the working load as a function of the load
angle. In the case of the ANL-2 eyebolt, this means that the 200 kg working
load becomes 60 kg at 45 degrees. Do not use eyebolt flying if the load angle
is higher than 45 degrees.
| 0 Degrees| 30 Degrees| 30%| More than 45 Degrees
---|---|---|---|---
% Working load| 100%| 65%| 45 Degrees| 25%
The following illustrations show different views on eyebolt flying for a single box. The length of the back cables or chains determines the vertical angle of the box.
D.A.S. AUDIO, S.A.
C/. Islas Baleares, 24
46988 Fuente del Jarro
Valencia, SPAIN
Tel. +34 96 134 0860
D.A.S. AUDIO OF AMERICA, INC.
6900 NW 52th Street
Miami, FL. 33166 – U.S.A.
TOLL FREE: 1 888 DAS 4 USA
D.A.S. AUDIO ASIA PTE. LTD.
3 Temasek Avenue, Centennial Tower #34-36
Singapore 039190
Tel. +65 6549 7760
www.dasaudio.com
References
- Sistemas de sonido profesional | ¿Necesitas asesoramiento? - DAS Audio
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>