Scienbeauty C1zqUl56t4L Portable Shoe Dryer User Guide
- June 13, 2024
- Scienbeauty
Table of Contents
ZERO-SHOES DRYER
Smells Free , Humidity Free
Standards: GB 4706.1-2005
ZERO SHOES DRYER
| Name | SHOES DRYER | Model | DSHJ-S-1904 |
|---|---|---|---|
| Power | 20W | Input | 220-230V~ |
| Net Weight | 252g | Size | 170mm 7imm 29mm |
PRODUCT VIEW
OPERATION
STEP1 Take out the inclusions tor first use and read this instruction
caretully.
STEP2 Please put the product into shoes betore plug in the power of
220V∼. STEP3 After power-on, click the button,the working mode will shift in
9H, 6H,3H and off. The indicator of 1/2/3 will start when the 3/6/9H button is
opened.
TIPS :
It will start working by default after the power is turned on if the purchased
product is a regular version. After drying, please pull out the power line.
Recommended time: Leather shoes / canvas: 3H; sport shoes/skating shoes:6H
;catton-padded shoes/Ugly boots:9H
STEP4 Please pull oul the plug and organized the product after drying.
Safety Cautions (please read it carefully and follow it strictly)
- Do not place any dangeraus objects on the product.
- Do not put the product into water to avoid damage or leakage.
- When the power is on, the indicator light will be light up and the dehumidifier body will be slightly hot, which is a normal phenomenon.
- Do not disassemble any parts by yourself to avoid possible failure or damage to the product.
- Vapour evaporation is a normal phenomenon during the drying process.
- Please keep in 10em and over distance with other products, meanwhile increase air convection when the power is on to avoid possible damage to the product.
- Children and the elderty should be used under supervision and guidance.
- Please unplug and contact related after-sales department immediately once abnormal of peculiar smell happened. Do not fix it by yourself to avoid danger.
- Damaged product should be replaced of repaired by a technician or manufacturer recognized by our company.
Fault analysis and elimination
-
Question 1: The indicator does not respond when charging.
Reasons Analysis: Power is not connected or has failed.
Solution: Connect power again. if it stil can not work properly, please contact the after-sales department for product maintenance or replacement. -
Question 2: Shoes cannot be dried when the light is on.
Reasons Analysis: Moisture/humidity is not completely excluded.
Reasons Analysis: Please continue heating for several hours, if it still can not work properly, please contact the after-sales department for product maintenance of replacement.
PRECAUTIONS
- Please read and reserve this manual before use this product.
- Please use the accessories configured or appointed by the manufacturer.
- The drying spead of the product will vary due to differences in usage environment, humidity and season.
- When the cloctricity is powered on, the drying time (wire control version) can be selected. Hf the shoe body still has moisture after drying, please continue to power on.
- Vapour evaporation is a normal phenomenon during the drying process.
- This product is low-power that does not cause any harm to the product or the environment even if the plug-in time exceeds the recommended time.
- This product is suitable for shoes that are wet or slightly wet but not dripping, and socks that are dried by washing machine.
- Odor may occur during the drying of shoes and socks. Keep shoes and shoes dryer in a well ventilated area.
- Please try to hang the products during drying to get a best effect.
- Please do not place the power-on shoe dryer directly on the carpet or any fabric.
- Please do not touch the shoe drycr immediately after drying to avoid scald.
GUARANTEE CARD
Enjoy the warranty with the card, so please reserve il carefully.
Thank you for purchasing this product, and the warranty expires after 12
months from purchase date. Please keep it good and fill in below information
for warranty.
Product mode:
Dealer name:
Date of purchase:
Name:
Contact phone number:
Address:
Solution:
Repair:
Warranty Condition
Please show the card when you need the warranty, and fill in necessary
information. We offer 12 months’ warranty since purchase date.
Warranty Condition
Quality problem under healthy daily use, without external force. We
shoulder no responsibil- ity if there’s damage and inconvenience during the
processing period. In principte, customers don’t need lo pay any for the item
if il’s covered by policy. However, we would charge for testing and
accessories per situation if the product beyond the wartanly period.
Free maintain won’t be given under following circumstances
Human Force Breakdown: improper manipulation, destruction, circuit burn,
compressional deformation, outside parlicles entering, damp, sealing tag
modified or ripped, any other visible man-made damage. Act Of God Damage:
earthquake, flood, typhoon, war etc.
Design & Producer
ShenZhen BigCase Technology Co.,Lid
147, building C, Changshishanhai Yunhut, No 1067,
Xuegang Hd, Bantian Street, Longgang District,
Shenzhen, Guangdong Province, China
|
---|---
http://weixin.qq.com/r/NCni_j7EpGPbrXqZ93wm| http://weibo.com/6328751867
Tel: 400 9968 711
DESIGNED BY SOTHING
www.sothing.net
eVatmaster Consulting GmbH
Bettinastr.30
60325 Frankfurt am Main,Germany
contact@evatmaster.com DESIGNED BY SO THING
WWW.SOTHING.NET
All techtical intarmation shail be hesed an actual praduet parinrnarice
All tights neservect by SOTHING