Tucano Urbano R236X Termoscud Waterproof Leg Cover Instruction Manual

: June 13, 2024
: Tucano Urbano

Table of Contents

ASSEMBLY KIT
PRODUCT SPECIFICATION
DETAILS
WARNING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Tucano Urbano R236X Termoscud Waterproof Leg Cover

Summary view of the assembly steps (A>D) and finished product fitted on the scooter.

ASSEMBLY KIT

PRODUCT SPECIFICATION

step A

Unfold Termoscud® on the scooter’s seat with straps 3 forward.

step B

Fasten the leg cover on both sides, using the screws A supplied, passing them through the holes in points 1.

step C

Fasten the hooks of the straps 3 to the edge of the bodywork.

step D

Fasten the hooks of the straps 2 to the edge of the bodywork under the footboard.

Note

Adjust the position of Termoscud® using the regulations of the straps to fit perfectly on the shield.
Finally inflate S.G.A.S. tubes.
Exceeding portions of the straps must be tucked under the Termoscud® cover to avoid flapping

S.G.A.S. (patented anti-flap inflatable system) with new valve fitted with incorporated cap and watertight closure.
S.G.A.S. adapter included for manual/ pump inflation: makes pumping hygienic and prevents air leakage when the valve is being closed.

DETAILS

Chest cover with safety strap.
During summer months, deflate the S.G.A.S. air chambers and roll them back towards the inside; then fasten them by passing the red cords through the loops provided on the exterior of the Termoscud®.
Get a better protection by sitting on straps 5, especially in cold conditions.
As a deterrent write your registration number in the space provided.
An elasticized waterproof cover can be pulled over the seat when the scooter is parked.
Inside the Termoscud® packaging are some clear adhesive stickers to be applied to the bodywork in order to protect the paintwork. These are removable and will not leave residues of glue. If the Termoscud® is not fitted correctly or the straps kept taught, marks could appear on the bodywork after a period of time.
For further protection we recommend purchasing the kit paint-saver 346 or 347.
To wash Termoscud® at the end of the season use a damp cloth and let dry well before storing.
DO NOT WASH WITH THE PRESSURE WASHER JET.

WARNING

Before assembling the product, check that Termoscud® is compatible with your model of scooter. Consult your dealer o website www.tucanourbano.it .
Ensure correct and safe usage of the leg cover by following the assembly instructions carefully: in case of doubt, consult qualified personnel.
Once you have assembled the product, check that it is correctly attached and that no part of the product impedes driving, steering, correct functioning of the vehicle, or your ability t place your feet on the ground. Make sure all straps are securely fixed with no risk of catching in any moving part. Failure to follow these instructions will impair the products performance and put your safety at risk.
Before using the product for the first time, practice putting your feet to the ground quickly and check that all other manoeuvres can be safely executed. Do this in a safe place where there is no traffic, first on the centre stand with the vehicle still and then whilst driving at low speed. Failure to follow these instructions will put your safety at risk.
Every time you use your scooter and after any fall, accident or impact (eg. riding off a high pavement), check carefully that the product is correctly positioned, that the straps are correctly tensioned, that all screws and bolts are tight and that all attachments are intact. not, remove the product before proceeding.
When using your scooter, position your feet so they can rapidly contact the ground during stops, especially when ‘side straps 5’ are tucked between seat and driver.
Do not change or modify the product in any way. Only use original parts.
The leg cover may alter the aerodynamics of your vehicle. This must be taken into consideration. keep the vehicle and its speed under control, especially in strong winds.
Remember to keep the anti-flap SGAS air chambers fully inflated.
Keep these instructions for future reference.