Govee H61C2 Desk Neon Rope Light User Guide

June 13, 2024
Govee

Govee H61C2 Desk Neon Rope Light

Govee H61C2 Desk Neon Rope Light

In The Box

① Neon Rope Light x1
② Internal Angle Cover x1
③ End Cap x1
④ Power Adapter x1

Installing Your Device

Before You Install

Step1
Unpack the box and check for all included items.

Step2
Plug the neon rope light into power and check if it lights up.
Please follow the steps below if you want to fix the rope light to the desk edges snugly:

Step 1
Power the rope light off. Compare the rope light to the desk edges and determine the final length you want.

Installing Your Device

Step 2
Flip the light over and find the cuttable position that is closest to and does not surpass the end. Carefully cut along the indicator line with scissors.

Installing Your Device

Step 3
Put the end cap onto the end of the rope light. Power on and check if it lights up.

Installing Your Device

Installation Steps

Step 1
Wipe the surface to make sure it’s clean and dry.

Step2
If your desk is L-shaped (or has an internal angle), please stick the internal angle cover to the corner first. Firmly press the internal angle cover for 1 Os to make sure it snugly sticks to the corner.

Installation Steps

Step3
Peel off the protective film and carefully stick the rope light to the edges little by little. Firmly press the rope light for 1 Os, especially at the corner, to make sure it snugly sticks to the edges.

Installation Steps

Step4
Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effects.

Installation Steps

Steps5
Power on the neon rope light and start using.

Installation Steps

Introduction

Thanks for choosing the Govee RGBIC LED Neon Rope Light for desks. The 2-meter neon rope light supports Bluetooth, voice control (Alexa/Google Assistant) which can bring the decor of your desks to a higher level with RGBIC lighting effects.

What You Get

LED Neon Rope Light 1
Adapter 1
User Manual 1
Service Card 1
Internal Angle Cover 1
End Cap 1

At a Glance

At a Glance

Installing Your Device

Before You Install

  1. Unpack the box and check all items listed in the packing list.
  2. Power on the neon rope light and check whether it lights up.

Installing Steps

  1. Wipe the surface to make sure it’s clean and dry.

  2. If your desk is L-shaped (or has an internal angle), please stick the internal angle cover to the corner first. Firmly press the internal angle cover for 1 Os to make sure it snugly sticks to the corner.

  3. Peel off the protective film and carefully stick the rope light to the edges little by little. Firmly press the rope light for 1 Os, especially at the corner, to make sure it snugly sticks to the edges.
    Installing Steps 

  4. Peel off the protective film on the control box and stick it on. Place the control box close to the music source to achieve the best music effects.
    Installing Steps 

  5. Power on the neon rope light and start using.
    Installing Steps 

Pairing Your Device with the Govee Home App

What You Need

  • A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
  • A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Pairing Instructions

  1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
  2. Turn on Bluetooth on your smartphone.
  3.  Open the app, tap the”+” icon in the top right corner and search for “H61 C2”.
  4. Tap the device icon and follow the on-screen instructions to complete pairing.
    |
    ---|---

Controlling the Device with Your Voice

  1. Open the app, then tap the device icon to enter detail page.
  2. Tap the setting icon in the top right corner.
  3. Select Using Guidance and follow on-screen instructions to control the device using your voice.

Specifications

Power Input (Adapter) 100-240VAC SO/ 60Hz
Power Input (LED Strip light) 24VDC 1 A
light Displaying Technology RGBIC
length 2m/6.56ft
Control Method APP,Control Box,Voice Control

Troubleshooting

  1. The adhesive has poor retention
    • Make sure the installation surface is clean and dry.
    • Firmly press over the strip after sticking.
  2. Cannot connect to Bluetooth.
    • Do not skip Bluetooth connection in the app.
    • Ensure Bluetooth on your smartphone has been turned on.
    • Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
    • Power the neon rope lights and your smartphone Bluetooth off then on, then try again.
    • Ensure that your smartphone is within 1 m/3.28ft of the neon rope lights when connecting.
    • Clear any obstructions that are between the neon rope lights and your smartphone.
  3. The neon rope lights does not display the full selected color/Some LED beads do not light up.
    • Please contact the Govee support team for rapid product replacement.
  4. Cannot sync the neon rope lights to the beat of my music.
    • Move the control box closer to the music source.
    • Clean the mic on the control box then try again.
  5. Cannot connect to Wi-Fi.
    • Do not skip the Wi-Fi connecting steps in the app.
    • 5GHz network’ is not supported. Please set the router to 2.4GHz and then reset it.
    • Connect your phone to Wi-Fi and check whether the network works well.
    • Make sure you have entered the correct Wi-Fi name and password.
    • Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
    • Connect hotspot in your phone to the neon rope lights and check whether the router works with the neon rope lights.
  6. Cannot connect to Alexa.
    • Pull out every connective part of the neon rope lights and firmly re-connect them.
    • Re-connect your phone to Wi-Fi.
    • Plug out the adapter port and re-plug it in.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry  Canada licence-exempt RSS standard(s}. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-005. Cet appareil numérique de la classe Best conforme a la norme NMB-005 du Canada.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced. Not intended for illumination. Only used for creating ambiance.

  1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
  2. Do not use the rope light when covered or recessed into a surface;
  3. Do not open or cut the rope light;

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.

Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 2501 Chatham Rd Suite R Springfield IL 62704
Email: support@govee.com
Contact information: https://www.govee.com/support

Govee is a trademark of Shenzhen lntellirocks Tech Co.,Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech Co.,Ltd. All Rights Reserved.

FOR INDOOR USE ONLY
POUR UNE UTILISATION EN INTÉRIEUR UNIQUEMENT

Govee Home App

QR Code

For FAQs and more Information, please visit: www.govee.com

Icon  Your Journey Begins Now!

LET’S CONNECT

Inspire & Be Inspired

  • Share your creations on social media.
  • Connect with our active Govee Community.
  • Discover new ideas for using your products.

Social Media icon

NEED HELP?

Contact us anytime!

 Support@govee.com
Report an issue on the app
Rapid Replacement on the app

Join Govee Home

Download Govee Home App for new releases, user events, and more.

QR Code

|
---|---

VIEW AMAZING SETUPS

VIEW AMAZING SETUPS

Discover Govee Home

Discover Goeve Home

  1. Advanced Features
    Exper,ence 1r,-depth features via Govee Home App including Music & Scene modes, Tap-to-Run, DreamView, and more

  2. Stunning Light Effects
    DIV & share your own effects 1n Light Studio and also find thousands of user- made effects to use.

  3. Shop in the App
    Enjoy exclusive discounts and customer service on our one-stop Savvy User Store.

  4. Bonus Content
    Earn, points towards free Govee products and play exciting mini-games.

Join Our

Global Community

Connect with Other Smart Home Lovers

The Govee Home Community is where users can discuss making their lives smarter and better. View exciting new product experiences, interact with Govee employees and other Govee users, participate in official events, and learn about upcoming features and products.

Club in the Community

You can discover what you are interested 1n and meet more like-minded friends by joining clubs and starting discussions!

  • Make It A Movie Night

  • Show Your Gaming Gear

  • Music and Lights

Discover the Community using the app’s Compass icon.

Symbols

FROM COMMUNITY MEMBERS

@SecondProfessor
I made one click and entered a world of colors!

@Kai Xi Priest
Making life brighter with every design imaginable!

Symbol @JaedenC
Amazing products to make any experience more immersive!

Connect with these users?

Search their nicknames in the community.

Customer Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
  Email: support@govee.com
  Official Website: www.govee.com
@Govee  @govee_official  @govee.official
@Goveeofficial  @Govee.smarthome

Govee Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals