iLIVE IAEB34B Bluetooth Wireless Earbuds User Guide

: June 13, 2024
: iLive

Table of Contents

Warnings and Precautions
FCC Warnings
Features
Introduction
Battery Power
Pairing a Bluetooth Device
Playing Audio Wirelessly
Using the Speakerphone
LED Indicator
Contact Information
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

iLIVE IAEB34B Bluetooth Wireless Earbuds

Warnings and Precautions

WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
WARNING : Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.
Note : This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead after several attempts to charge, please contact 1-888-999-4215 for support.
Never disassemble the unit or attempt to remove the battery as that could cause leakage of an electrolytic substance.

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Features

Supports Bluetooth v4.0
Supports profile A2DP (Advanced Audio Distribution Profile)
Digital volume control
Built-in microphone
Driver: 10mm
USB port for battery recharge
Wireless range: 33 feet
DC battery power: built-in rechargeable lithium ion battery
Battery life: ~6 hours audio

Includes

3 sets of eartips: 1 small, 1 medium, 1 large
2 detachable ear hooks
USB cable
Carry pouch

Introduction

Installing and Wearing Ear hooks

Battery Power

Connect the included USB cable to the USB port on a powered computer to charge. Charge fully before use.
The indicator will display a red light when charging, and turn blue when fully charged.
Initial charge time ~2 hours.

Pairing a Bluetooth Device

Power on the unit by pressing and holding the Power/Pair button for ~4 seconds. The indicator will flash red and blue. When pairing, remain within 3 feet of the unit.
Using the native controls on your Bluetooth device, select “IAEB34” in your Bluetooth settings to pair. If your device requests a password, enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.

Playing Audio Wirelessly

Follow the instructions for Pairing a Bluetooth Device.
Use the native controls on the connected Bluetooth Device to select a track.
To play or pause the selected track, use the native controls on the connected Bluetooth Device or press the Power/Play/Pause/Speakerphone/Pair button.
Audio played through the connected Bluetooth device will now be heard through the speakers.

Using the Speakerphone

Follow the instructions for Pairing a Bluetooth Device.
When a call is received, a ringtone will sound through the earbuds speakers.
Press the Power/Play/Pause/Speakerphone button to accept the call or accept the call with the native controls on the connected device.
The incoming call received through the device will now be heard through the earbuds speakers.
To end the call, press the Power/Play/Pause/ Speakerphone button or end the call using the native controls on the connected device.

To re-dial the last dialed number,press the Power/Pair key twice.

LED Indicator

Status	Indicators
Power on	Flashing blue light
Power off	No light
Charging	Red light
Finished charging	Blue light
Pairing mode	Flashing red and blue lights
Low power	Flashing red light