tp-link TapoC325WB Outdoor Security WiFi Camera User Guide
- June 13, 2024
- tp-link
Table of Contents
tp-link TapoC325WB Outdoor Security WiFi Camera
Product Information
The Outdoor Security Wi-Fi Camera is a high-quality camera designed for outdoor surveillance. It is equipped with advanced features to ensure reliable and convenient usage.
Key Features:
- Easy setup with the Tapo app
- High-resolution video recording
- Weatherproof design for outdoor use
- Powerful night vision capabilities
- Supports microSD card for local recording
- Connects to Wi-Fi or wired network
- Compatible with iOS and Android devices
Appearance **
**
The camera has the following components:
Front
-
MIC
-
White Light
-
System LED
-
DC Power Connector
Used to connect to a 9V DC power adapter -
Ethernet Port
Used to connect to a network device
Side
-
microSD Card Slot
Insert a microSD card for local recording microSD card not included. -
RESET button
Hold for 5s to reset Wi-Fi or 10s to factory reset camera -
Speaker
System LED Status
- Solid red: Starting up
- Blinking red and green (for Wi-Fi setup): Ready for setup
- Blinking red slowly (for Wi-Fi setup): Connecting to Wi-Fi
- Solid amber: Connected to Wi-Fi or wired network
- Solid green: Connected to the cloud
- Blinking red quickly: Camera resetting
- Blinking green quickly: Camera updating
Frequently Asked Questions (FAQ)
Q1. What should I do if I fail to configure Tapo Camera?
If you encounter difficulties while configuring the Tapo Camera, please visit
https://www.tp-link.com/support/faq/2747/ for detailed instructions.
Q2. What should I do if the SD card is not working properly?
If your microSD card is not functioning correctly, ensure that you are
using a Class 10 microSD card or higher with a storage capacity ranging from 8
GB to 512 GB. Additionally, make sure you have initialized the microSD card in
the Tapo app. If the problem persists, please contact our technical support.
- Make sure you are using a microSD card.
- It’s recommended to use a Class 10 microSD card or higher, with storage from 8 GB to 512 GB.
- Make sure you have initialized the microSD card in the Tapo app.
- If the problem still persists, contact our technical support.
Q3. How do I reset the camera?
To reset the camera, follow these steps:
- With the camera powered on, press and hold the Reset button for about 5 seconds until the System LED blinks red quickly to reset the Wi-Fi while keeping other settings.
- For a factory reset of the camera, press and hold the Reset button for 10 seconds.
- To factory reset the camera using the Tapo app, open the app, go to the Camera Settings page, and remove the camera.
For more questions, please refer to https://www.tp-
link.com/support/faq/2742/
For technical support, the user guide, and more information, please visit
www.tapo.com/support/
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Do not use the device where wireless devices are not allowed.
- Adapter shall be easily accessible.
- Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
- Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
- Do not disassemble, repair or modify the product.
- Do not use the product if the casing has been broken. Danger of electric shock.
- Never touch the product with wet hands.
- Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
- Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
- Do not use liquid to clean the product. Only use a dry cloth.
- Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
- This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequality shielded from external RF (radio frequency) energy.
- Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
- Do not place heavy objects on top of the product.
- When you leave the product unused for a long time unplug the product from the power outlet.
- Adapter should be used indoors where the ambient temperature is lower than or equal to 40 °C.
- This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.
- Operating Temperature: -20°C~45°C (-4°F ~113 °F )
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of
conformity may be found at https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of the Radio Equipment Regulations
2017. The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
Product Usage Instructions
Set Up Camera:
Follow these steps to set up your Outdoor Security Wi-Fi Camera:
- STEP 1: DOWNLOAD APP
Get the Tapo app from the App Store or Google Play.
Scan to download
- STEP 2: POWER UP
Plug in the adapter to power up your camera.
- STEP 3: SET UP
Tap the + button in the app and select your model. Follow the app instructions to complete setup.
Install Your Camera
Follow these steps to install your Outdoor Security Wi-Fi Camera:
Drill Holes
Stick the mounting template to the desired mounting place. Drill 3 screw
holes (=6mm) according to the template.
Mount Camera
Insert three anchors into the holes and use the screws to affix the camera
over the anchors.
Connect to Power
Connect the camera to a power outlet using the provided power adapter.
Install the waterproof seal for the power connectors.
Install Waterproof Cable Attachments
Install the waterproof cable attachments for the network interface. Make
sure each part is securely attached, and the waterproof rings are flush to
keep out water.
The Ethernet port connects to a network device.
- Route the network cable through the following components in order: fix nut, waterproof ring, and then the waterproof jacket.
- Insert the waterproof ring into the waterproof jacket.
- Fix the O-ring to the network interface of the camera and connect the network cables.
- Attach the network interface with the waterproof jacket, then twist to lock. Rotate the fix nut to secure it to the waterproof jacket.
The Ethernet port does not connect to a network device.
- Insert the waterproof plug into the waterproof ring, then insert them into the waterproof jacket.
- Attach the network interface with the waterproof jacket, then twist to lock. Rotate the fix nut to secure it to the waterproof jacket.
Setup Videos
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#cloud-cameras
©2023 TP-Link
References
- Regulatory Compliance | Tapo
- UKCA | Tapo
- TP-Link Product Support - Wireless Networking Equipment Support
- What Should I Do If I Fail To Configure a Tapo Camera | TP-Link