WISIYILINK MK-WPS402W 4 USB Port Printer Server Instruction Manual

WISIYILINK MK-WPS402W 4 USB Port Printer Server

Product Information

Product Name:
MK-WPS402W USB Port Printer Server

Description:
The MK-WPS402W USB Port Printer Server is a device that allows for multi- network sharing of printers. It supports dual LAN ports, VLAN, and multi- segment network segment printing. The device is fully compatible with special printer models such as HP 1020, HP P1007, P1008, and P1505. It is easy to install and support IP addresses of four network segments to share printers in different IP segments. The printer server also offers wireless connectivity, eliminating connection troubles. With newly developed firmware, it is more convenient for office use.

Features:

• No software is required for multi-network sharing
• Dual LAN port with VLAN support
• Compatible with special printer models
• Easy installation
• Supports IP addresses of four network segments
• Wireless connectivity
• Newly developed firmware for enhanced convenience

Specifications:

• Brand: WISIYILINK
• Model: MK-WPS402W
• Number of Printers Connection: 4
• Network Access: Wireless
• Network Protocol: IEEE 802.3; RAW
• Number of Users: 2
• CPU: 400MHz
• Flash Memory: 8MB
• RAM: 32MB
• Dimensions: 11.2x7x3cm
• Material: Iron shell
• Operating System: XP/Vista/Win7/Win8/Win10 (32/64Bit)
• Applicable to: Canon, HP, Epson, Brother, Lenovo, and other printer brands

Connection Diagram: [Insert connection diagram image here]

Made in: China

Product Usage Instructions

1. Connect the MK-WPS402W USB Port Printer Server to your printer using a USB cable.
2. Connect the printer server to your network using the wireless or wired LAN ports.
3. Ensure that your printer is compatible with the MK-WPS402W. Refer to the compatibility list in the user manual.
4. Power on the printer server and wait for it to initialize.
5. Install the necessary printer drivers on your computer(s) according to the operating system requirements specified in the user manual.
6. Configure the IP address settings of the printer server to match your network configuration. Refer to the user manual for detailed instructions.
7. Once the printer server is properly configured, you can start printing to the connected printer(s) from any device on your network.

Note : For advanced features such as VLAN support and multi-segment network segment printing, refer to the user manual for specific configuration instructions.

Description

This is a 4 USB port print server that supports a USB printer to print more than one computer to share, does not support multiple printers or other interface printer sharing, and does not support the sharing of scanning. Most of the USB port printers are supported, but not all. The print server uses an IP port to work, so support TCP / IP protocol system can be. The printer driver is installed in your system, the server just needs to transfer the port only. So make sure your printer has a corresponding driver available for your system. (Does not support tablets, or smart smartphones).

Features

• No software, multi-network sharing at the same time.
• Dual LAN port, support VLAN, multi-segment network segment printing
• The device is fully compatible with special models such as the HP 1020, HP P1007, P1008, and P1505. It is easy to install and support IP addresses of four network segments to share printers in different IP segments.
• Wireless connectivity, eliminating connection troubles.
• Newly developed firmware, is more convenient for your office use.

Specifications

RJ45 Interface x2

| Material| Iron shell
Network Protocol| IEEE 802.3; RAW| Operating System| XP/Vista/Win7/Win8/Win10 (32/64Bit)
Number of Users| 2| Applicable to| Canon, HP, Epson, Brother,

Lenovo …

Connection Diagram

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>