GOAL ZERO HPP Plus Solar Wall Plate Kit 10 Plus Recharger Yeti 1250 Solar Generator Kit Installation Guide

HPP+ SOLAR WALL PLATE
Kit 10 Plus Recharger Yeti 1250 Solar Generator Kit
INSTALLATION GUIDE

HPP Plus Solar Wall Plate Kit 10 Plus Recharger Yeti 1250 Solar

Generator Kit

IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Please read all warnings, instructions and cautions carefully before use to avoid personal injury, property damage or damage to your Yeti PRO 4000, or any connected products. Goal Zero reserves the right to update this document without prior notice. Please visit www.goalzero.com to find the latest product information and the most recent version of the User Guide.

INSTRUCTIONS REGARDING THE HAZARD OF FIRE, ELECTRIC SHOCK OR INJURY.

• WARNING – High voltage. The system can have voltages up to 150V.
• WARNING – This connector is for use with Goal Zero products only.
• WARNING – This product must be installed by a qualified and licensed electrician.

Specifications

POWER
For assistance with your device in the United States, visit our contact page at www.goalzero.com/contact or call 1-888-794-6250. For assistance with your device outside of the United States, contact the local distributor.
If you do not have contact information for the local distributor, contact us in the United States and we will help connect you to the local representative.

Getting Started

In the Box

1. 2x HPP+ Solar Wall Plugs
2. 1x Interior Outlet Cover
3. 2x Mounting screws for the interior outlet cover
4. 2x RJ45 couplers

Additional Items Needed for Installation (Not Included)

1. Outdoor Outlet Cover
2. 2x Gang Outlet Box
3. Internal Wall Cable for solar (10 AWG, 90C rated)
*Note: We recommend using different colored cables for positive and negative.
4. CAT5e or CAT6 cable
5. RJ45 male connectors| 6. Wing-Nut Wire Connectors
7. Goal Zero Solar Solution (eg. Nomad 400)
8. Goal Zero Male to Male 12′ HPP + Extension Cable, SKU 98710
9. Goal Zero Yeti PRO 4000
10. Goal Zero Tank PRO 4000 expansion tank(s) (optional)
11. Goal Zero Haven 10 manual transfer switch (optional)
---|---

Install Overview

Installation Instructions

How to Install the Wall Plate

1. Choose a location to install your wall plate indoors. It should be within 12 feet of where you’ll be storing your Yeti power station. For assistance choosing the best location, consult your electrician.

2. Electrical box preparation
   a. If using an existing box: Follow the industry standards for running wires.
   b. If using a new box: Choose a location for your outdoor wall plate. Be sure it is within reach of your desired solar location. Install the box according to industry standards.

3. Run the solar cables through the wall between the exterior and interior outlets. Then run the Cat5e/Cat6 cable.
   If installing via conduit, please ensure the solar wiring is in a different conduit run from the Cat5e/Cat6, per NEC requirements. If running cables internally, make sure there is at least 6 inches of space between the high voltage solar cable and low voltage Cat5e/Cat6 cable.

4. Install exterior and interior electrical boxes according to required NEC standards. Make sure the Cat5e/Cat6 and 10 AWG wiring enter and exit the box from different entry points to provide high voltage/low voltage isolation.

5. a. Use a Wing-Nut Wire Connector to connect the positive solar cables.
   b. Use a Wing-Nut Wire Connector to connect the negative solar cables
   c. Use Coupler to connect the internal wall Cat5e/Cat6 cable to the interior wall plate Cat5e/Cat6 using the coupler. Repeat for the exterior wall plate.
   d. Screw the wall plug into the wall plate.

6. Repeat step 4 for the outdoor box.

7. Attach the outdoor plate for the outdoor plug. And attach the indoor plate to the indoor plug.

8. Plug the Male-to-Male HPP+ Connector into the indoor plug and Yeti power station.

9. Plug all solar extension cables from the outdoor plug to the solar location before connecting solar.

10. Connect solar. For your safety, the solar panels should always be the last thing connected to reduce risk of exposure to live voltages.

GOAL ZERO HEADQUARTERS
Draper, UT 84020
1-888-794-6250
Designed in the U.S.A.
Made in China
Goal Zero Yeti is a trademark of Goal Zero.
GOALZERO.COM

Documents / Resources

| GOAL ZERO HPP Plus Solar Wall Plate Kit 10 Plus Recharger Yeti 1250 Solar Generator Kit [pdf] Installation Guide
HPP Plus Solar Wall Plate Kit 10 Plus Recharger Yeti 1250 Solar Generator Kit, HPP, Plus Solar Wall Plate Kit 10 Plus Recharger Yeti 1250 Solar Generator Kit, Recharger Yeti 1250 Solar Generator Kit, Solar Generator Kit, Generator Kit, Kit
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>