Cannondale Cujo Neo 2 Electric Bike Owner’s Manual

June 13, 2024
cannondale

Cannondale Cujo Neo 2 Electric Bike

Read this supplement and your Cannondale Bicycle Owner’s Manual. Both contain important safety information. Keep both for future reference.

Explicit Definitions
In this supplement, particularly important information is presented in the following ways:

DANGER
Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Indicates a hazardous situation that, if not avoided, may result in death or serious injury.

NOTICE
Indicates special precautions that must be taken to avoid damage.

Cannondale Supplements

  • This manual is a supplement to your Cannondale Bicycle Owner’s Manual.
  • This supplement provides additional and important model-specific safety, maintenance, and technical information. It may be one of several important manuals/supplements for your bike; obtain and read all of them.
  • Please contact your Authorized Cannondale Dealer immediately if you need a manual or supplement, or have a question about your bike.
  • You may also contact us using the appropriate country/region/location information. See Contacting Cannondale in this supplement.
  • You can download Adobe Acrobat PDF versions of any manual/supplement from our website: http://www.cannondale.com
  • This supplement contains information for the following models listed in MODELS APPENDIX.

Your Authorized Cannondale Dealer
To make sure your bike is serviced and maintained correctly, and that you protect applicable warranties, please coordinate all service and maintenance through your Authorized Cannondale Dealer.

NOTICE
Unauthorized service, maintenance, or repair of parts can result in serious damage and void your warranty.

Contacting Cannondale
Cannondale USA Cycling Sports Group, Inc.
1 Cannondale Way, Wilton CT, 06897, USA
1-800-726-BIKE (2453)
Cycling Sports Group Europe B.V
Mail: Postbus 5100
Visits: Hanzepoort 27
7570 GC, OLDENZAAL, Netherlands
Tel: +41 61 551 14 80
Fax:+31 54 151 42 40

Identification
Please refer to the MODELS APPENDIX section for identification information.

Safety Information
Please read the manufacturer’s owner’s manuals and instructions for the operation and maintenance of the drive-assist system before operating your E-Bike. These materials are available as electronic downloads (in Adobe Acrobat PDF format) from our website. Visit the MODELS APPENDIX section of this supplement for information on how to download the manufacturer’s drive assist system manuals. You may  also visit the SUPPORT section of our website and select your bike model: http://www.cannondale.com/en/USA/Support/OwnerManuals/E-Series

Maintenance
Please refer to the manufacturer’s owner’s manuals and instructions for the operation and maintenance of the drive-assist system for maintenance guidelines.

Notes/Record
Use this section to record any important notes or information related to your E-Bike.

MODELS APPENDIX
This section provides additional information and identification details for specific models of Cannondale Electric Bikes.

Explicit Definitions
In this supplement, particularly important information is presented in the following ways:

DANGER

  • Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

WARNING

  • Indicates a hazardous situation that, if not avoided, may result in death or serious injury.

NOTICE

  • Indicates special precautions that must be taken to avoid damage.

Cannondale Supplements

  • This manual is a “supplement” to your Cannondale Bicycle Owner’s Manual.
  • This supplement provides additional and important model-specific safety, maintenance, and technical information. It may be one of several important manuals/supplements for your bike; obtain and read all of them.
  • Please contact your Authorized Cannondale Dealer immediately if you need a manual or supplement, or have a question about your bike. You may also contact us using the appropriate country/region/location information. See Contacting Cannondale in this supplement.
  • You can download Adobe Acrobat PDF versions of any manual/supplement from our website: http://www.cannondale.com
  • This supplement contains information for the following models listed in MODELS APPENDIX.

Your Authorized Cannondale Dealer
To make sure your bike is serviced and maintained correctly, and that you protect applicable warranties, please coordinate all service and maintenance through your Authorized Cannondale Dealer.

NOTICE

  • Unauthorized service, maintenance, or repair parts can result in serious damage and void your warranty.

Contacting Cannondale

Cannondale USA
Cycling Sports Group, Inc.
1 Cannondale Way, Wilton CT, 06897, USA 1-800-726-BIKE (2453)

Cycling Sports Group Europe B.V
Mail: Postbus 5100
Visits: Hanzepoort 27
7570 GC, OLDENZAAL, Netherlands
Tel: +41 61 551 14 80
Fax:+31 54 151 42 40

Drive-Assist System
The manufacturer’s owner’s manuals and instructions for the operation and maintenance of the drive-assist system are available as electronic downloads (in Adobe Acrobat PDF format) from our website. Obtain and read these materials BEFORE you operate the bike.

  • Do not operate your E-Bike until you have read and understand the manufacturer’s manuals and instructions.
  • Please go to the “MODELS APPENDIX” section of this supplement to find information on how to download the manufacturer’s drive-assist system manuals.
  • You may also visit the SUPPORT section of our website and select your bike model: http://www.cannondale.com/en/USA/Support/OwnerManuals/E-Series www.cannondale.com.

Vehicle Category: AMake: Cannondale

IDENTIFICATION

E-Bike Parts
An example E-Bike model is shown below. Your actual model and the accessories (e.g. lighting, fenders, rack, kickstand) may be different.

  1. Frame
  2. Drive motor
  3. Drive display/control unit
  4. Drive battery
  5. Front chain ring
  6. Rear chain ring
  7. Drive sensor/spoke magnet
  8. Head Lamp
  9. Rear Lamp
  10. Fender
  11. Rear Rack
  12. Kickstand
  13. Number plate holder
  14. Number plate light
  15. Key
  16. Serial Number (ID)
  17. Label

Keys
The drive system is turned ON and OFF using a key. Keys may also operate accessories and locks if equipped. Keys are identified by the serial number, SERIAL. Please record the key serial number for future use and key replacement. If your keys are ever lost or stolen, or you would like additional spares, please contact the key provider.

NOTICE
Don’t ride with key in battery lock. Always remove the key from the lock after using it. Keys may be stolen or break off accidentally in the lock. Keep your spare key in a safe place.

Replacement information by key provider:

SAFETY INFORMATION

Intended Use

  • Electric bikes, also known as “E-Bikes” are bicycles equipped with an electric pedal assist drive system.
  • An E-Bike IS NOT a moped or motorcycle.
  • The drive-assist system consists of a drive unit, a battery, a computer control, and various electronic components (harness wires, sensors, and switches). This model bike does share components common with pedal-only bikes.
  • There are many different drive-assist systems for differing uses and bike types. Likewise, there are various drive-assist system manufacturers (Shimano, BOSCH, Yamaha, etc.)
  • It is important to know that when the drive-assist system is turned ON, the drive unit engages to provide power only while you are pedaling. The amount of power provided by the drive unit depends on your pedaling force and the assistance mode/level you set with the handlebar control unit. At any time, if you stop pedaling, the drive-assist will disengage. In all modes/levels, the drive-assist system power reduces progressively and cuts off as the bike reaches a the maximum allowable speed. The drive-assist re-engages when speed drops below the maximum allowable speed as long as the pedals are turning.
  • Whenever the drive-assist system is turned OFF, you can pedal the bike normally. The drive system will not engage.

WARNING

  • UNDERSTAND YOUR BIKE, DRIVE-ASSIST SYSTEM, AND THE INTENDED USE OF BOTH. USING YOUR BIKE THE WRONG WAY IS DANGEROUS.
  • Please read your Cannondale Bicycle Owner’s Manual for more information about Intended Use and Conditions 1-5.
  • DRIVE SYSTEM: You must follow the manufacturer’s instructions for intended use or limitation. Please consult the manufacturer’s owner’s manuals and instructions.
  • Please consult the MODEL APPENDIX section of this supplement for more information.

Drive System
MANUFACTURER’S INSTRUCTIONS – In addition to this supplement, you must read and follow the manufacturer’s instructions for all components of the drive-assist system:

  • Drive Unit Battery
  • Display/Control Unit Charger

These instructions contain correct operation, service and maintenance information. Drive system instructions can be also be found at: http://www.cannondale.com/en/USA/Support/OwnerManuals/E-Series www.cannondale.com.

No Modification
DO NOT MODIFY THIS BICYCLE/DRIVE SYSTEM/ IN ANY WAY FOR ANY REASON. Doing so can result in severe damage, faulty or dangerous operating conditions, or violation of local laws.
Dealers and Owners MUST NOT change, alter, or modify in any way the original components of the bicycle or drive-assist system (e.g. the specified sizing of the attached gear ratios (front/rear chain rings) ). Attempts to “hot-rod” or “improve” the speed of the bike are dangerous to the rider. Use only specified Cannondale and/or manufacturer drive-assist service and replacement parts.

YOU CAN BE YOU SERIOUSLY INJURED, PARALYZED OR KILLED IF YOU IGNORE WARNINGS.

Compliance/Regulation
YOU MUST OBEY ALL LOCAL LAWS & REGULATORY REQUIREMENTS –

  • It is your responsibility to identify and follow all local laws and regulations necessary for legal compliance. Compliance with local regulation is critical to the safety of a rider and others where the bike is used.

Here are some important specifications related to compliance with local laws:

  • VEHICLE CLASS – A definition (California, USA) of the different types of E-Bikes, E-Bike labeling and legal use areas, including any required additional equipment, registration, and applicable rider age restrictions.
  • VEHICLE CATEGORY – A definition of the European Union of the different types of E-Bikes, who and where they may be used, necessary additional equipment such as lighting and signaling devices as well as any necessary insurance and licensing.
  • MINIMUM OPERATOR AGE – A minimum age requirement for a rider of the E-Bike. This restriction as well as speed and additional equipment requirements (light, helmets, license plates, signal lamps, etc.)
    Follow any state or local laws for any minimum age restrictions for E-Bikes.
    Ask your local Authorized Cannondale Dealer for more information about operating an electrically assisted pedal bicycle in your area.
    Please consult the MODEL APPENDIX section of this supplement for more information.

Operation

ALWAYS WEAR AN APPROVED BICYCLE HELMET AND ALL OTHER PROTECTIVE GEAR (e.g. GLOVES, PADS, AND CYCLING SHOES).
IMPORTANCE OF PRACTICE & RIDER TRAINING

  • Before you ride this bike, practice riding in a safe area free from hazards. Take time to learn to bike’s controls and performance. Practice the controls and gain the experience necessary to avoid the many hazards you will encounter while riding.

  • DO NOT RIDE “HANDS-OFF – Keep your hands on the handlebars when riding the bike. If you remove your hands from the handlebar while riding, you can lose control of the bicycle and crash.

  • CHANGING THE ASSISTANCE LEVEL WHILE RIDING – Changing the drive-assistance level while riding will increase or decrease the acceleration of the bike. You should anticipate this change in speed and react appropriately depending on the riding conditions. (such as on slippery trails, tight turns, or unstable or uneven surfaces). Set assistance level to “ECO” (lowest assist) or “OFF” before descending technical trails, (e.g. tight downhill switchbacks).”

  • WHEN NOT RIDING – TURN THE DRIVE SYSTEM OFF and REMOVE THE BATTERY, KEY, AND CONTROL UNIT AND STORE ALL IN A SECURE AREA TO PREVENT UNAUTHORIZED USE. Remove the battery and key when the bike is parked for long periods.

  • DO NOT RIDE THE E-BIKE WITHOUT THE BATTERY. MAKE SURE THE BATTERY IS FULLY CHARGED BEFORE EVERY RIDE. This will help ensure adequate battery power for necessary lighting and the drive system.

  • DO NOT REMOVE ANY LIGHTING OR REFLECTORS AND DO NOT RIDE IF THEY DO NOT WORK.

  • DO NOT ALLOW CHILDREN TO OPERATE OR COME INTO CONTACT WITH E-BIKE OR ITS PARTS.

  • ONLY TURN THE DRIVE SYSTEM ON WHEN YOU ARE SEATED WITH YOUR HANDS ON THE HANDLEBAR READY TO RIDE.

  • ACCIDENTAL ACTIVATION – Always remove the battery from the bike before working on the bicycle or if you transport the bike by car or plane. Accidental activation of the bicycle drive system can result in serious injury.
    The drive system will not function without the computer unit attached to the base properly. If the computer disconnects from the base during operation, the drive system will shut off. If this happens you will have to stop the bike, turn the system off, re-attach the computer to the base, and then turn the system back on to resume. Remove the computer when not operating the bike to prevent theft or unauthorized use.

  • YOUR INSURANCE POLICIES – Your insurance policies (e.g. liability, property and injury) may not provide coverage for accidents involving the use of this bicycle. To determine if coverage is provided you should contact your insurance company or agent. Also, make sure your speed e-bike is insured and registered according to local laws.

RIDE SENSIBLY, RIDE SAFELY AROUND OTHERS

  • The application of power by means of the electric motor assist means that riders can reach high speed. Riding faster increases the risk of serious accidents.
    Watch out for other vehicles, cyclists, pedestrians, and animals where you ride. Always operate under control and at a safe speed. Others may not be aware of you. It is your responsibility to anticipate and react to avoid accidents.

E-BIKES ARE HEAVIER THAN ORDINARY BIKES

  • Always park the bike in a suitable safe area away from children, cars or animals that may come into contact with it. Park the bike so that it cannot fall over possibly resulting in injuries.
    DO NOT RIDE INTO OR ATTEMPT TO RIDE THROUGH WATER OR SUB-MERGE ANY PART OF THE BIKE. If you ride through water you can lose control of the bike or the drive- assist system can become disabled or damaged.

WARNING

  • EQUIPMENT – Any bicycle Including an e-bike must be properly equipped for commuting including any legally required lights, signals, and registrations. Ask your Authorized Cannondale Retailer about commuting if your bike’s intended use is suited to commuting and it is properly equipped.
  • DANGERS – Operating an E-bike as a commuting vehicle is no less dangerous than an ordinary pedal bike or automobile. E-bikes are certainly not designed to protect you in a crash. Do not assume the bike or its driving capability will protect you or keep you from being involved in a serious accident.
  • NIGHT RIDING – Riding at night on an E-Bike or pedal-only bike is very hazardous.
    Read the topic “Riding at Night” in your Cannondale Bicycle Owner’s Manual now for more information on the many hazards of riding at night.
    You must operate with a very high degree of awareness and precaution to reduce the risk of death or serious injury.

No Child Seats or Trailers

  • Child seats and trailers or racks can not be used and are not allowed to be used with your Cannondale E-Bike.

YOU CAN BE YOU SERIOUSLY INJURED, PARALYZED OR KILLED IF YOU IGNORE WARNINGS.

Battery & Charger
DANGER

  • The battery pack voltage must match the battery pack charging voltage of the charger. Otherwise, there is a risk of fire and explosion.

WARNING

  • REPLACEMENT – Only use the battery pack and charger indicated in the MODEL TECHNICAL of this supplement. Do not use other batteries or chargers. Do not use the charger to charge other batteries.

  • PREVENT DAMAGE – Do not drop the battery or charger. Do not open, disassemble, or modify the battery or charger. No user-serviceable parts inside.
    Keep the battery out of intense sunlight. Keep away from heat. Heat will damage the battery.
    Keep the battery away from paper clips, coins, keys, nails, screws or other small metal items, to prevent shorting exposed battery contacts. Shorting battery contacts can cause severe burns, fire, or explosion.

  • ACCIDENTAL ACTIVATION – Always remove the battery from the bike before working on the bicycle or if you transport the bike by car or plane. Accidental activation of the bicycle drive system can result in serious injury.

  • STORAGE & TRANSPORTATION – When the battery is not in use in the bicycle, its transportation is subject to hazardous materials regulation. Special packaging and labeling requirements may exist. Contact local authorities for specific requirements. Never transport a damaged battery. Insulate battery contacts before packaging. Package the battery inside a shipping container to prevent damage.
    The battery must be removed before flying and may be subject to special handling by the air carrier.

  • CHARGING – Remove the battery from the bike before charging. Bring indoors and allow to reach room temperature before charging. Make sure charger and A/C outlet are the same voltage.
    Locate both charger and battery indoors, in a clean, dry area with good ventilation to charge. Make sure the area is free from combustibles to avoid fire from sparks or overheating. Keep charger ventilation openings unobstructed. Do not cover the charger or the battery.
    Disconnect the battery from the charger unit when fully charged. Do not leave a fully charged battery connected to the charger. Unplug the charger from the wall outlet when not in use.
    Maintain the battery and the charger as directed by the manufacturer’s instructions.

  • DISPOSAL – The battery pack/charger contains regulated materials and must be disposed of/discarded in accordance with national and/or local laws. Do not discard the battery/charger into fire, water or ordinary household waste/garbage. Take to a waste facility/recycler.

FAILURE TO OBSERVE THESE WARNINGS CAN RESULT IN ELECTRICAL FIRES, EXPLOSIONS, OR SEVERE BURNS OR ELECTROCUTION.

Kickstand

  • If your E-Bike is equipped with a kickstand:
  • Do not sit on the bicycle with the kickstand down. A kickstand is not designed to support the weight of a person.
  • Make sure the kickstand is up before riding. The kickstand folds in automatically when the bike is not leaned to the side. Make sure you park your bike on an appropriate surface.
  • The kickstand must only be installed by a professional bike mechanic and if installed, it must be safely compatible with your bike frame. No modifications must be done to the frame in order to fit one.

Rear Rack

  • The MODEL APPENDIX section of this supplement will indicate if a rear rack can be safely fitted to your model bike.
  • A rear rack must only be installed by a professional bike mechanic and if installed, it must be safely compatible with your bike frame. No modifications must be done to the frame in order to fit one.
  • Do not overload a rear rack. Make sure the cargo is secured properly.
  • Observe the RACK MAXIMUM WEIGHT LIMIT found in the MODEL APPENDIX section of this supplement.
  • Improperly installing a rack, altering your bike to install a rack, or over-loading a bike rack can create dangerous riding conditions.

Maintenance

See also, MAINTENANCE in this supplement.
E-Bikes need more maintenance than you might be aware. You can not ignore maintenance .
Here are some critical maintenance items that can require frequent attention:

  • Tire Pressure/tread condition – check it often!
  • Brake pads and braking – check and replace pads frequently.
  • Chain /belt drive – clean and inspect often. Replace it when worn out.
  • Fasteners can loosen over time. Have fasteners and mounted accessories checked often by a professional bike mechanic.

The following table lists only supplemental maintenance items. Please consult your Cannondale Bicycle Owner’s Manual for more information on basic bike maintenance. Consult with your Authorized Cannondale Dealer to create a complete maintenance program for your riding style, components, and conditions of use. Follow the maintenance recommendations given by the component manufacturers for the various parts of your bike.
CHECK THE FOLLOWING BEFORE EACH RIDE:

  • Make sure the battery is fully charged and locked securely in position on the bicycle.
  • Check tire pressure and wheel condition. Make sure wheel quick releases are firmly closed.
  • Check the drive chain condition. Make sure it is clean and well-lubricated. Chain wear is greater compared with pedal-only bikes. This requires frequent inspection and replacement.
  • Check the bicycle’s front and rear lighting to make sure it works properly.
  • Check the bicycle brakes, and make sure they are working well. Brake system pad and disc wear is greater compared with pedal-only bikes. This requires frequent inspection and replacement.
  • Inspect the condition of electrical cables (i.e. Kinks free, no signs of abrasive wear)
  • Test the drive-assist system, and make sure the drive system functions normally.
  • If your E-Bike model was equipped a lighting system, brake lights, headlights, and number plate illumination, make sure these lights are each functioning normally. Make sure the number plate is clean and readable.

IF YOU FIND ANY DAMAGE, DO NOT RIDE THE BIKE, CONTACT YOUR AUTHORIZED CANNONDALE DEALER.

TO BE PERFORMED BY AUTHORIZED CANNONDALE DEALER:
Recommended after the first 150 km, bring your bike to your Authorized Cannondale Dealer for an initial check-up. It should include checks of the drive-assist system, drive chain condition, proper shifting, accessories, wheels and tire condition, brakes, etc. This visit will help you establish a schedule for repeated visits appropriate for how and where you ride.
Every 1000 km, bring your bike into your Authorized Cannondale Dealer for a regular detailed inspection, adjustment, and replacement of wear items across the entire bike. Electrically powered-assist cycle (electric bikes) can wear out wheels, tires, drive chains, and brakes, more quickly.

ANY PART OF A POORLY MAINTAINED BIKE CAN BREAK OR MALFUNCTION LEADING TO AN ACCIDENT WHERE YOU CAN BE KILLED, SEVERELY INJURED OR PARALYZED.
Please ask your Authorized Cannondale Dealer to help you develop a complete maintenance program, a program that includes a list of the parts on your bike for YOU to check regularly. Frequent checks are necessary to identify the problems that can lead to an accident.

Drive-Assist System
NOTICE

  • Drive-assist system components must only be serviced at an authorized service center. This will ensure the quality and safety of the drive-assist system.
  • Never attempt to open, or remove drive system parts from the frame, or work on them yourself. Other components of the electric bicycle drive (e.g. drive chain, front chain ring, rear cassette, rear derailleur, crank arm) must be serviced by an Authorized Cannondale Dealer.
  • Replacement parts must be identical to the original Cannondale specification for the bike. See MODELS APPENDIX in this supplement. Failure to replace components with original specifications can result in serious overload or other damage to the drive unit.
  • Unauthorized opening or service of the drive unit will void the warranty.

Cleaning

When cleaning your bike, use a damp sponge or a soft brush with only a mild soap and water solution. Rinse the sponge often. Do not spray water directly on controls or drive system components.

NOTICE
Do not use a pressure washer or dry with compressed air. This will force contaminants into sealed areas, and electrical connections/components promoting corrosion, immediately damaging, or result in accelerated wear.

  • KEEP WATER AWAY FROM THE ELECTRICAL COMPONENTS.
  • MAKE SURE THE BIKE IS SECURED UPRIGHT AND CAN NOT FALL OVER ACCIDENTALLY WHILE YOU ARE CLEANING IT.
  • Don’t rely on the kickstand. Use a sturdy portable bicycle wheel stand to hold the bike upright.

Keys
Please Note: After lots of rides and washing, the battery lock can become dry and difficult to use.
To maintain, whenever you lubricate your bike chain, place a few drops of chain oil on the key insert the key and operate the lock, then remove and wipe the key clean.

NOTES
Use this page to write /record important information about your E-Bike : (e.g. maintenance history, dealer contact information, settings, etc.)

MODELS APPENDIX

QUICK NEO Specifications

REGION US EU
MODEL CODE C63358M C63358F
MODEL NAME QUICK NEO QUICK NEO WOMEN
TOURER QUICK NEO TOURER WOMEN

 INTENDED USE


ASTM F2043









For off-road riding and jumps less than 12” (30cm)

| ASTM CONDITION -2, General Purpose Riding


INTENDED: For paved roads, gravel or dirt roads that are in good condition, and bike paths.


NOT INTENDED: For off-road or mountain bike use, or for any kind of jumping. Some of these bikes have suspension features, but these features are designed to add com- fort, not off-road capability. Some come with relatively wide tires that are well suited to gravel or dirt paths. Some come with relatively narrow tires that are best suited to faster riding on pavement. If you ride on gravel or dirt paths, carry heavier loads or want more tire durability talk to your dealer about wider tires.

MAXIMUM WEIGHT LIMIT (Total)| 150 kg, 330 lbs
RACK WEIGHT LIMIT| 25 kg, 55 Lbs
CLASS

(US California AB-1096)

| CLASS 1
EPAC| EN 15194, EN ISO 4210
EU DIRECTIVE| 2002/24/EG
DRIVE-ASSIST SYSTEM| Shimano Steps DU-E6050,| Shimano Steps DU-E6001,
MAX POWER, SPEED| 20 mph, 32 km/h| 15 mph, 25 km/h
DRIVE-ASSIST OWNERS MANUAL| http://si.shimano.com/

Please read your Cannondale Bicycle Owner’s Manual for more information on specifications marked with the safety alert symbol “ .”

TRAIL NEO, CUJO NEO

REGION US, EU
MODEL CODE C61208M
MODEL NAME 27.5+ M Cujo Neo 1

Cujo Neo 1 Wmn
 INTENDED USE


ASTM F2043









For rough off-road riding and jumps less than 24” (61 cm)

| ASTM CONDITION-3, Cross-Country, Marathon, Hardtails


INTENDED: For cross-country riding and racing which ranges from mild to aggres- sive over intermediate terrain (e.g., hilly with small obstacles like roots, rocks, loose surfaces and hard pack and depressions). There are no large “sick drop” or drop offs, jumps or launches (wooden structures, dirt embankments) requiring long suspension travel or heavy duty components. Cross- country and marathon equipment (tires, shocks, frames, drive trains) are light-weight, favouring nimble speed over brute force.


NOT INTENDED: For use in extreme forms of jumping/riding such as hard-core mountain, Free-riding, Downhill, North Shore, Dirt Jumping, Hucking, etc.

MAXIMUM WEIGHT LIMIT (Total)| 150 kg, 330 lbs
RACK WEIGHT LIMIT| 0 kg, 0 lbs – no rack
CLASS

(US California AB-1096)

| CLASS 1
EPAC| EN 15194, EN ISO 4210
EU DIRECTIVE| 2002/24/EG
DRIVE-ASSIST SYSTEM| Shimano Steps DU-E8000,
MAX POWER, SPEED| 20 mph, 32 km/h| 15 mph, 25 km/h
Drive-assist OWNERS MANUAL| http://si.shimano.com/

CONTRO E SPEED

REGION US
MODEL CODE C62237M
MODEL NAME CONTRO-E SPEED

 INTENDED USE


ASTM F2043









For off-road riding and jumps less than 12” (30cm)

| ASTM CONDITION -2, General Purpose Riding


INTENDED: For use in areas approved for commuter bicycles. For use on paved roads.


NOT INTENDED:

For off-road or mountain bike use, or for any kind of jumping. For areas open only to CLASS I and CLASS 2 ebikes.

| 150 kg, 330 lbs
RACK WEIGHT LIMIT| 25 kg, 55 Lbs
CLASS

(US California AB-1096)

| CLASS 3
EPAC| N/A
EU DIRECTIVE| N/A
DRIVE-ASSIST SYSTEM| Bosch Performance Speed
MAX POWER, SPEED| 28 mph, 45 km/h
DRIVE-ASSIST OWNERS MANUAL| http://www.bosch-ebike.de

Tightening Torques

DESCRIPTION Nm In Lbs Loctite™
Kickstand Mounting 7.0 62.0
Rear Rack Mounting Bolts 3 – 4 26.5 – 35.4 ****

242 (Blue)

Stem/Handlebar Clamp Bolts| 6.0| 53.0
Dropout Mounting Bolts| 15| 133|

If you decide to tighten fasteners yourself always use a good torque wrench!

SI Console

Handlebar Adjustment
The handlebar height is adjusted by loosening the pivot bolt (1) and moving the arms (2) handlebar up or down to the desired position. Re-tighten the pivot bolt to the specified torque with a torque wrench following adjustment. The adjustment bolt is treated with a thread locking agent, but it will require periodic re-application of Loctite #242 (blue), especially if frequent adjustments are made.

WARNING
Adjustments should only be performed by a qualified bicycle mechanic.

Head Lamp & Display Mounting
The drive assist system display and head lamp and reflector brackets are to be mounted onto the center support (3). This support will rotate so that the mounted parts can be positioned correctly. The head lamp mounting bracket (4) can also be rotated if necessary.

The maximum adjustment range is 65 degrees.

CANNONDALE USA
Cyc/ing Sports Group, Inc. 7 Cannondale Way, Wilton CT 06897 USA 7-800-726-B//<E (2453)

CANNONDALE EUROPE
Cycling Sports Group Europe B. V Mail: Postbus 5700
Visits: Hanzepoort 27 7570 T, OLDENZAAL, Netherlands
Tel: +47 67 55114 80 Fax.•+37 54 157 42 40
WWW.CANNONDALE.COM
0 2076 Cycling Sports Group Electric Bike Owner’s Manua/ Supplement – 734903 Rev 2

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals