Panasonic RP-HZ47 Clip Headphone INSTRUCTION MANUAL
- June 4, 2024
- Panasonic
Table of Contents
**
Panasonic RP-HZ47 Clip Headphone**
Specification
- Special Feature On-the-ear-headphones
- Connectivity Technology Wired
- Headphones Jack 5 mm Jack
- Noise Control Active Noise Cancellation
- Model Name RP – HZ47
- Fit Type On-Ear
- Product Dimensions 9 x 2.2 x 1.2 inches
- Item Weight 13 ounces
- Color White
What’s In the Box
- Clip Headphone
Product Description
9.9mm thin frame design. Simply attachable rotary clip hanger. It is slim and light and comfortable. An unbalanced Y-cable with one longer line.
How to Use
You can use the headphones by following the given steps
- Plug the 3.5mm plug into the port of the phone.
- Now put the headphones ON.
- Now play music from your phone.
- You will start hearing it from headphones.
HOW TO PROTECT HEADPHONES WIRES
Pull The Plug, Not The Cable. Coil The Cable Carefully. Don’t Let The Cord Dangle. Don’t Keep Them Plugged In. Make Your Wired Earphones Strong (And Beautiful), Get A Carry Case, and Don’t Sleep With Them On.
HOW TO REPAIR HEADPHONES WIRES
You’ll need an army knife, a lighter, and heat-shrinking tubing to patch and repair headphone wires and cables. You must strip the cable, remove the wire covering, reattach the wires, and apply heat-shrinking tape or electric tape to finish the repair.
HOW TO CLEAN HEADPHONES PORTS
Lint could become lodged in the headphone jack of your Android or iPhone after placing the device in your pocket. The best way to delicately remove these textile fibers without causing any damage is with paperclips and tape.
Care and Maintenance
- After each use, wipe.
- Keep your headphones to yourself.
- Brush any dirt or earwax off the driving unit gently.
- Remember to bring the jack.
- Don’t put them in your pocket right away.
- Don’t let the cables dangle.
- Wires should not be twisted.
- Avoid wrapping your cables tightly in loops.
Warranty & Support
Product Warranty: For warranty information about this product.
FAQs
How long do wired headphones last?
When you take proper care of the cables, you may increase the lifespan of wired headphones, which is typically around two years. If you treat them gently, wired headphones can last up to 7-8 years, which makes them generally more durable than Bluetooth headphones.
How long can headphones used?
When analysing headphones and hearing loss, the length of exposure to noise is also a crucial consideration. As a general rule, you should only use MP3 players for a total of 60 minutes each day at volumes no higher than 60% of maximum.
Do wired headphones sound better?
In general, wired headphones typically offer higher sound quality than wireless ones. But with the most recent developments in wireless technology, wireless headphones’ sound quality has significantly increased.
Why do headphones stop working so quickly?
The most common reasons why earphones and earbuds quit working are cable tension, incorrect wiring from the manufacturer, moisture damage, and damage to the sound drivers. These incidents could result in audio shorts or a total disconnect between the drivers and the audio source.
What volume is safe for headphones?
The World Health Organization (WHO) advises only 8 hours of headphone use at an intensity of 85 decibels (dB). However, the sound intensity of typical audio equipment ranges from 75 to 136 dB. When listening to audio, most listeners typically keep the volume between 75 dB and 105 dB.
Does high volume damage headphones?
Yes, because loud volume causes your headphones’ drivers to overheat and risk burning the driver coils. Once it does, drivers will suffer damage and have a shorter lifespan.
Is it OK to use headphones all day?
In-ear device use under normal circumstances rarely results in issues. However, using earphones for an extended period of time, such if you wear them all day, may: compress the earwax, making it less fluid and more difficult for the body to properly eliminate. compress the earwax to the point that the body starts to inflame.
Do you need to charge wired headphones?
Line-level audio signals are produced by passive speakers that are a common feature of wired headphones. Typically, these headphones don’t require an external power supply. The power required to run the headphones is generated by the audio impulses themselves. Therefore, neither batteries nor charges are required.
Why do people use wired headphones?
Wired headphones give superior sound quality using analogue signals because they can carry more data than digital signals like Bluetooth. Since less processing will be required before the audio reaches you, it will be more clearer and crisper in its full resolution.
Can wired earphones be repaired?
You’ll need an army knife, a lighter, and heat-shrinking tubing to patch and repair headphone wires and cables. You must strip the cable, remove the wire covering, reattach the wires, and apply heat-shrinking tape or electric tape to finish the repair.
Why are my wired headphones not working?
Examine your headphones’ connector, cable, remote, and earbuds for wear or breakage. Check each earbud for debris on the meshes. Use a small, clean, dry brush with soft bristles to carefully brush debris out of all apertures.
What is the best sound level for headphones?
How long should you wear your headphones at what volume? Experts advise limiting sound levels to between 60 and 85 decibels to lessen the harm that is done to your ears. Limit your usage to no more than 15 minutes if you are listening to music that is about 100 decibels.
Can clipping damage headphones?
Only if they are highly powerful, such as when connected to a speaker amp or something similar, will your headphones break. Clipping won’t ever cause them harm.
Can headphones cause headaches?
Over-ear and on-ear headphones might result in headaches because of their unsuitable clamping force. After wearing it for a few minutes, you will be able to feel it. If the straps are excessively tight, they can be loosened.
How do you charge wired earphones?
Before you start your trip, make sure your earphone case is charged. You can use a USB cable to charge the earbuds; connect to charge, and after the case is fully charged, a light will emerge. After that, put your headphones in the case, and the earbuds will start charging.