planika FLA 3 990 Calacatta-Laurent Fireplace Instruction Manual
- June 13, 2024
- planika
Table of Contents
planika FLA 3 990 Calacatta-Laurent Fireplace
Product Information
The Calacatta / Laurent Fireplace is a stylish and modern fireplace option. It is compatible with FLA 3 990, FLA 3+ 990, Neo, Prime Fire 990+, and Prime Fire 700 burners. This product is manufactured by Planika Sp. z o.o. and is copyrighted. For more information, visit www.planikafires.com. The model number of this product is I1508#02, and it was last updated on 05.09.2022.
Standard Equipment:
- A Firebox
- B Windscreen
- C Side glass ( Quantity : 2)
- D Side glass screw
Minimum Room Size:
The minimum room size required for installation varies depending on the
specific model of the Calacatta / Laurent Fireplace. Please refer to the
original burner manual for the specific dimensions.
Product Usage Instructions
Leveling the Fireplace:
To ensure proper installation, it is important to level the fireplace.
Follow the instructions provided in the original burner manual for leveling
the Calacatta/Laurent Fireplace.
Glass Assembly:
- Place the side glass in the corresponding slot of the Firebox.
- Tighten the pressure plate inside the Firebox to secure the side glass in place.
Warning: Do not place the windscreen in slots until after the burner is in place. Refer to the section “Placing the burner” for further instructions.
Placing the Burner:
- Follow the electricity connection instructions according to the specific model of the Calacatta / Laurent Fireplace:
- Calacatta / Laurent Fireplace with FLA 3 990 : Use an electricity connection with a minimum of 3×1.5mm2, 230V 50Hz PE (electric 3 PIN cube).
- Calacatta / Laurent Fireplace with FLA 3+ 990: Use an electricity connection with a minimum of 3×1.5mm2, 230V 50Hz PE (electric 3 PIN cube).
- Calacatta / Laurent Fireplace with Prime Fire 990+ : Use an electricity connection with a minimum of 3×1.5mm2, 230V 50Hz PE (electric 3 PIN cube).
- Follow the specific burner placement instructions provided in the original burner manual for FLA 3 990, FLA 3+ 990, Neo, Prime Fire 990+, or Prime Fire 700.
Please note that the operation of the fireplace is included in the original burner manual. Refer to that manual for detailed instructions on operating the Calacatta/Laurent Fireplace.
Installation
WARNING : This Manual only applies to the installation of FLA3 990 / FLA3+ 990 / Neo / Prime Fire 990 +/ Prime Fire 700 burner with the Calacatta / Laurent Firebox only. The operation of the fireplace is included in the original burner manual
IMPORTANT INFORMATION
Fireplace Size
Standard Equipment
| EN | Quantity | |
|---|---|---|
| A | Firebox | 1 |
| B | Windscreen | 2 |
| C | Side glass | 2 |
| D | Side glass |
screw
| 2
Minimum Room Size
Minimum Room Size / [m3]
| Laurent Fireplace FLA 3 990 | 70 |
|---|---|
| Laurent Fireplace FLA 3+ 990 | 70 |
| Laurent Fireplace Prime Fire 990+ | 70 |
| Laurent Fireplace Prime Fire 700 | 44 |
| Laurent Fireplace Neo | 50 |
FIREPLACE INSTALLATION
Leveling the fireplace Level the firebox before installing the burner
Glass assembly
Place the side glass in the corresponding slot, then tighten the pressure plate inside the Firebox to secure it in place.
Warning! Locate the windscreen in slots once the burner is in place (point 2.3. Placing the burner)
Placing the burner
Place the burner and then fix the windscreens in slots (step 3, point 2.2. Glass assembly)
| ****
SHS
| Electricity connection
---|---|---
Laurent Fireplace with FLA 3 990| | min. 3×1,5mm2, 230 V 50Hz PE
(electric 3 PIN cube)
Laurent Fireplace with FLA 3+ 990| | min. 3×1,5mm2, 230 V 50Hz PE
(electric 3 PIN cube)
Laurent Fireplace with Prime Fire 990+| | min. 3×1,5mm2, 230 V 50Hz PE
(electric 3 PIN cube)
Laurent Fireplace with Prime Fire 700| | min. 3×0,75mm2, 230 V 50Hz PE
(electric 3 PIN cube)
Laurent Fireplace with Neo| ****| min. 3×1,5mm2, 230 V 50Hz PE (PLUG IN
connection)
SELECTED INSTALLATION OPTIONS
-
GLASS SHIELD
-
NON-FIAMMABIE MATERIAI
-
Installation with backwall. Burner with a technical glass shield
-
Island installation. Burner without technical glass shield
The operation of the fireplace is included in the original FLA3 / FLA3+ / Prime Fire 990+ (page 12.) / Prime Fire 700 (page 13.) / Neo (page 10.)