Lenco Xemio-860 MP3 MP4 Player with Bluetooth and 8GB Memory User Manual
- June 13, 2024
- Lenco
Table of Contents
Lenco Xemio-860 MP3 MP4 Player with Bluetooth and 8GB Memory User Manual
CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
-
Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.
-
Install in accordance with the supplied user manual.
-
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between -5° to 55° C.
-
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static free environment.
-
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
-
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away from animals. Some animals enjoy biting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
-
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
-
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
-
If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.
-
The rating label has been marked on the bottom or back panel of the device.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
-
This product is intended for non professional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this device.
-
Never place this device on other electrical equipment.
-
Do not allow children access to plastic bags.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
-
If the product is delivered with power cable or AC power adaptor:
• If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
• Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
• Unplug this device during lightning storms or when unused for a long period.
• The socket outlet must be installed near the equipment and must be easily accessible.
• Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
• Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
• Devices with class 2 construction do not require a earthed connection.
• Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
• Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock. -
If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
• “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
• [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. -
Caution about the use of Batteries:
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal.
INSTALLATION
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
Intended Use
This device is used to play music files in MP3, WMA, WAV, APE and FLAC
formats, as well as video files in AVI format with resolution in 240*320, and
photo files in JPG, GIF, BMP format. This product is not intended for
commercial uses or for medical and special applications in which the failure
of the product can cause injury, death or substantial property damage. The
liability shall expire in the event of use that does not conform to the
intended use. Opening and altering the device as well as using additional
equipment and accessories that have not been approved by us is prohibited. Do
not use the device under extreme environmental conditions and observe the
safety instructions. Non-compliance with information and safety instructions
contained in this manual shall be deemed as noncompliance with the intended
use and will cause the liability to lapse and may cause injury or property
damage.
⚠ WARNING: When participating in the traffic listening to a personal music
player can make the listener less aware of potential dangers such as
approaching cars.
WARNING: To prevent possible hearing damage, do not listen at high volume
levels for long periods.
1. Device overview
2. Package content
Please check the package content for completeness
- Bluetooth MP4 Player
- Stereo headphones
- USB cable
- User manual
3. Connecting to a computer
In order to exchange files between your player and a computer, you can simply
connect your player to the computer using the provided USB cable. a)
Connecting the device In order to connect the player to the computer, insert
the USB cable with a free USB port of the activated computer and connect the
USB port of the cable with the player. It is now recognized as removable
medium and is ready for data transfer with the computer. Now you can simply
transfer the files from your computer to your player or vice versa using “Drag
and Drop” or by “Copy and Paste”.
b) Disconnecting the device Before removing the USB cable, you must make sure
that the data connection between the devices is separated! To do that, press
the M button for 1 – 2 seconds. The display now shows the current charging
level, and the data connection was separated. If you are using a Windows PC,
the player can also be disconnected via the computer. To do that, click on the
“Remove hardware safely” symbol in the Windows taskbar. Now select the MP4
Player and follow your computer’s instructions, until it confirms the
successful process. If you are using a Mac, you can simply disconnect the
player by dragging the player icon onto the trash symbol. The USB cable can
now be separated safely from the player and computer.
Note: Do not remove the player from the computer if the transfer of files
between the devices is not finished. This can result in data loss and damage
the medium.
4. Commissioning / Charging the battery / Headphones
The player has an installed internal rechargeable battery. Make sure before
activating the device for the first time that the battery is fully charged.
This process usually takes around 2 hours.
Charging the battery: The battery is charged via the USB connection with your
PC. To charge the battery, connect the device with the PC using the USB cable.
The charging process starts automatically.
Note: For optimum performance, the battery must be used regularly. If this is
not the case, recharge the battery at least once a month.
Charging status: Press any button to view the current charging status. A
battery symbol is now shown on the top right corner of the screen. If the
battery is fully charged, a solid battery icon is shown. If the battery is
still charging, a charging animation is displayed.
Usage during the charging process: You can use the player during the charging
process. Simply press once more on the M button and the device changes from
the charging status display into the main menu.
Note: If you change into the charging status display or use the device
connected to the computer, data transfer with the computer is no longer
possible. To be able to transfer files again, you must reconnect the player to
the computer.
Switching on: You will find further information on this in the next section
“Operation”.
Using the headphones: This player can play music through the 3.5mm jack
connector. Before connecting make sure that the player is set to a low volume
level. Now connect the supplied headphones with the device and slowly adjust
the volume to your desired level. Use only the supplied headphones.
WARNING: Prolonged exposure to excessively loud music can result in temporary
or permanent hearing damage or hearing loss. The use of the Video player in
traffic is not recommended. It can cause the listener to react disregardful
towards potential hazards such as approaching vehicles.
5. Operation
A). General operation
(1) Switching the player on and off Push the ON / OFF button on the bottom of
the device to switch on / off the player. If the Switch button is already on
the position of ON, then press and hold the button for 2-3s.
Note: This player has an energy-saving function. The device automatically
switches off if it is not used for more than 3 minutes.
(2) The main menu After activating the player, the main menu appears. It
consists of 9 different menu items: Music, Bluetooth, Video, Settings,
Recorder, EBook, Pictures, Folder and Tools. (3) Navigation With the or and
(M) or ( ) button, you can navigate through the different menus. With the
button you can open the desired menu item or start the desired function. Press
the Arrow Back button briefly to return to the previous level. Press the Arrow
Back button for 1 – 2 seconds to return to the main menu directly.
B). Music
(1) Playback Navigate from the main menu to the menu item `Music’ and confirm
your selection with the button. A playback screen opens and playback starts
automatically. To pause the playback or continue it, press the button. To jump
one track forward or back, press the or button respectively. To fast forward
or rewind within a track, simply keep it pressed. Press the (+) button or (-)
button to adjust the volume.
(2) Folder overview To reach the folder overview from the playback screen, press the Arrow Back button. Navigate with the or button to scroll through the files and existing folders. If you confirm a music file with the Play/Pause button, it is played back. If you confirm a folder with this button it is opened. With the Arrow Back button you change into the next higher level of your folder structure up to the main menu. To delete a file, navigate in the folder overview to the desired file and press the M button. Confirm this procedure with the Play/Pause button to delete this file permanently.
(3) Lyrics display It is possible with this player to display the lyrics synchronously. The lyrics file has to be in the format of (.lrc), and the name must be same as the music file name.
Press and hold the M button to display the lyrics, press and hold M button again to disable lyrics.
i. Repeat mode
Define the desired repeat mode here.
ii. Order / Shuffle playback Here you can activate or deactivate the random playback of all song files.
iii. A-B Loop It is possible with this player to select any period of a
musical piece and set it on repeat in a loop. Select AB Loop’ and press the button to activate, there will be appear on the music playback screen, andA’
starts blinking in Blue . Press button to determine the starting point (A),
then A turns solid white and B’ starts blinking in Blue . Press button again to determine the end (B), andAB’ starts blinking in blue , it starts
repeating in A-B loop. Press the button to disable the A-B loop, and `AB’ icon
will disappear.
iv. EQ Mode Select here your favorite equalizer mode. You can select between
Off, Rock, Funk, Hip hop, Jazz, Classical and Techno.
v. Speed Mode Here you have the opportunity to vary the speed of music
playback. Adjust the speed level with the
or button from -7 to +7. Press the button to apply your selected speed
playback. Note: EQ mode will be disabled after variable speed set.
C). Bluetooth
(1) Navigate in the main menu to the menu item Bluetooth’ and confirm your selection with the button. The folder overview opens. Select with the or button the sub-menus and confirm your selection with the button. (2) Operations – To enable Bluetooth, selectBluetooth Switch Control’ and press the button
to enter, select Bluetooth Open’ to activate, it will start auto scanning the nearby Bluetooth devices available; – To manually search Bluetooth device, selectSearch Device’ and press the
button to confirm, the available Bluetooth device will appear on the list,
Press the or button to select the device and press the button to start
pairing.
– When Bluetooth device connected successfully, return to Music’ menu and start enjoying. – To unpair the current Bluetooth device, press the or button to select Device list’, press
the button to enter and select the paired device, press the button again to
confirm `Disconnect’ or not.
“This product has a bluetooth transmission function, you can not receive any
bluetooth sound on it: this means that you can transmit wirelessly a bluetooth
sound signal to an external device like a bluetooth speaker, bluetooth
headphone, audio system with bluetooth reception,…”
This product operates at 2400 – 2483.5 MHz and is designated only to be used
inside a normal household environment. This product is suited for this purpose
within all EU counties.
D). Video
Note: 1. To playback videos on this player, they must be converted into the
AVI format adjusted to the
player using the provided conversion software; 2. To playback videos on this
player, they must be converted into the correct resolution as 320*240 or
below (refer to video convert instruction as below);
(1) Playback Navigate in the main menu to the menu item Video’ and confirm your selection with the button. The folder overview opens. Select with the or button the video file to play and confirm your selection with the button. The video starts automatically. To pause the playback or to continue it, press the button respectively. To jump one track forward or back, press the or button respectively. To fast forward or rewind within a video, simply keep it pressed. Press the (+) button or (-) button to adjust the volume. To delete the video, navigate in the folder overview to the desired file, or playback the video, then press the M button, selectDelete video’ and confirm
with the button to delete it permanently.
(2) Video Convert i. Install the video converting tool
Double click `amvtransform.exe’ ( ) to activate the video convert tool, it is
preloaded in the internal memory of this Player.
ii. Steps of video converting
Please follow the below steps to complete the video convert:
E). Pictures
(1) Playback Navigate from the main menu to the menu item `Pictures’ and
confirm your selection with the
button. The folder overview opens. Select with the or button the image file to
be viewed and confirm your selection with the button. To start automatic image
rendition or to pause, press the button respectively.
In the menu item you can define the display time of the automatic slide show.
You can choose between: 2s, 3s, 4s until 30s.
(2) Folder overview To reach the folder overview from the playback screen,
press the Arrow Back button. Navigate with the or button to scroll through the
files and existing folders. If you confirm a file with the button, it is
played back. If you confirm a folder with this button it is opened. With the
Arrow Back button you change into the next higher level of your folder
structure up to the main menu. To delete a file, navigate in the folder
overview to the desired file and press the M button. Confirm this procedure
with the button to delete this file permanently.
F). Folder
Navigate from the main menu to the menu item `Folder’ and confirm your
selection with the button. Now, the main directory of your memory space is
displayed. Navigate with the or button to scroll through the files and
existing folders. If you confirm a file with the button, it is played back. If
you confirm a folder with this button it is opened. With the Arrow Back button
you change into the next higher level of your folder structure up to the main
menu. To delete a file, navigate in the folder overview to the desired file
and press the M button. Confirm this procedure with the button to delete this
file permanently.
Note: In the Setup under the menu item System under Information you can get
information about the unused or reserved disk space as well as the entire disk
space of the inserted memory card.
G). Settings
Navigate in the main menu to the item Settings’ and confirm your selection with the (1) Display In the menu item Display you can find the following setup options: i. Brightness Here you can define the brightness of the display lighting in 11 levels. ii. Backlight Timer Here you can define how long the display is illuminated. You can choose between 10s, 20s, 30s and always on. iii. Screensaver Here you can select the screensaver of the display with eitherNone’ or `Digital clock’. The digital clock will show after the preset
time of backlight timer, which is defaulted as 30s.
(2) Sleep Timer In the menu item Sleep Timer you can define a period of time
after which the device automatically switches off. You can choose between off
(the device does not switch off automatically), 5 min, 10 min, 15 min, 30 min,
45 min, 60 min, 90min and 120 min.
(3) Date and Time In the menu item Date and Time you can set the time & time
format, also date & date format. Select with the or button the local date and
time, use the M button to switch among YY/MM/DD, HH/MM/AM/PM. Confirm with the
button to set the date and time.
(4) Language In the menu item Language you will have the chance to select one
among the preinstalled languages by choosing between French, English, German,
Spanish, Portuguese, Italian, Dutch, Chinese and so on….
(5) Information Here you can get information about the firmware version of the
player, the total available disk space, the reserved disk space (U:) and the
free disk space (F:) of your memory.
(6) Format Device Here you can choose to format internal memory and/or format
SD card,
Note: By formatting, all the data preloaded will be erased!
(7) Factory Settings By confirming this option you set the player back to the
defaulted standard settings.
(8) System Upgrade Please do consult with your local distributor or service
center before operation of this menu.
6. Technical data
Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore
some of the instruction, specifications and pictures in this documentation may
differ slightly from your particular situation. All items described in this
guide for illustration purposes only and may not apply to particular
situation. No legal right or entitlements may be obtained from the description
made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type [Lenco Xemio-860] is in
compliance with directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
https://commaxx-certificates.com/doc/xemio-860_doc.pdf
Service
For more information and helpdesk support, please visit
www.lenco.com Commaxx B.V. Wiebachstraat 37, 6466 NG
Kerkrade The Netherlands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>