Windsor 6502 Brass Cabinet Handles Instruction Manual
- June 13, 2024
- Windsor
Table of Contents
ARCHITECTURAL HARDWARE
FITTING INSTRUCTIONS
Product: Code 6502 6503 6504
6508 6509 6510
6514 6515 6516
BRASS CABINET HANDLES
Includes :
1x Cabinet Handle
2x M5 Fixing Screws*
2x Washers
2x Mounting Discs (optional)
-
Mark the fixing position for the cabinet handle on the door/drawer. They can be installed horizontally or vertically depending on the desired look.
Ensure adequate space is provided for clearance of knuckles when opening cabinetry. -
Drill two 5.5mm diameter holes at the marked fixing positions for the leg centres.
160mm Handles
6502, 6508, 6514 – 130mm crs
260mm Handles
6503, 6509, 6515 – 230mm crs
360mm Handles
6504, 6510, 6516 – 330mm crs
-
non standard cabinet thicknesses may require longer screws.
-
Hold the cabinet handle and align the legs with the pre-drilled 5.5mm diameter holes.
Insert two M5 fixing screws from the rear of the cabinet front, ensure washers are installed between the screw head and cabinet.
Install mounting discs (optional) between the cabinet handle leg and cabinet front.
Thread the screws into the cabinet handle legs and tighten using a screwdriver to fix in position.
-
Ensure that you do not overtighten the screws.
-
© WINDSOR ARCHITECTURAL HARDWARE
Version 1
0800 607 028
sales@windsorhardware.co.nz
windsorhardware.co.nz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>