porodo PD-SWNB-BK Smart Notebook and Writing Pad Instruction Manual
- June 13, 2024
- porodo
Table of Contents
Smart Notebook & Writing Pad
Portable Design – Smart Pencil Included
Model: PD-SWNB-BK
Product View
Note:
- SmartPad supports Windows, Mac, Android and i0S systems.
- There are slightly differences between the product pictures and actual appearance; the pictures in the manual are used for instruction purpose only. Please refer to your actual product for the functions and parameters.
- Try to reset the device by inserting a pin into the RESET hole meanwhile the indicator |ight goes off when the device not respond. It springs and the indicator light is on when the device is well
- Do not place SmartPad on the metal, mobile phone or PC and other objects that may interfere with the signal for writing. eDraw APP wi || be updated periodical ly for better experience and be sure your APP is the latest
SmartPad Function Introductions
Power ON/OFF
-
Press the power button for 3 seconds to power on/off.
Green LED: Normal work mode
Yellow LED: USB connected to PC
Highlighting: The pen is within the SmartPad work area
Sleep and awake -
If out-of use for 1 hour, the SmartPad will go asleep and the indicator light goes off.
-
Mhen the SmartPad cover is closed or folded, if out of use for 3 minutes, it also will go asleep and the indicator light goes off
-
Flip the cover or press the power button to awake, the indicator light will be on.
New Page/Save Function
- Click the “ by ” on the APP to save, it is ready to new page on eDraw APP.
- Press the power button for 0.5s and release, now the indicator light flashes 3 times to save the notes, meanwhile empty the notes on the SmartPad, it is ready to new page on eDraw APP.
SAVE ATTENTION
- If the” eDraw “ APP real time display writing. it synchronized to APP;
- If USB connection, user need manually save your notes on the PC.
- If use SmartPad alone, it stores in the SmartPad and upload the next time connection ” eDraw “ APP.
- When the SnartPad memory is full, the red and green indicator lights will alternate be on or under USB connected to PC the red and yellow indicator lights will alternate be on or the pen within the SnartPad work arca, the red indicator lights will highlight. Please timely Synchronize your works to APP.
Pen Function Introductions
Sleep and awake
If out-of use about 5 minutes, the penwill go asleep. You can draw again to
awake it
Pen calibration method
-
When the SmartPad is on, use the pen tip touch the SmartPad screen to make sure the pen is working
-
Keep pressing the power button and then insert the pin into reset hole till the red indicator light on. When loosen the button, the pen entering calibration status
-
Put the pen tip near the SmartPad writing area(Best is turn the last page of A5 Legal Pad ) as close as possible;
-
I the red high light turns green highlight once, then normal green, it means the calibration is successful;
-
If the red highlight becomes red highlighted flash five times, it means the cal ibration fails, please fol low steps 1.2.3 and cal ibrate again
Replace the tip
Note: Stylus refill is suitable for color filling.
How to Use eDraw APP
- Android and iOS Operation Instructions
(1). Download and install ” eDraw ” APP in your mobile phone
User can scan below QR or search “eDraw” in APP Store/Google Play to download.
|
---|---
https://itunes.apple.com/cn/app/edraw/id1438720527?mt=8|
https://play.google.com/store/apps/details?id=com.vson.edraw&hl=en
(Android 6.0 or above and i0S 9.0 or above)
(2). New My Notebook
a. Turn on your phone Bluetooth and network. Suggest open GPS, or it may fail
to scan Bluetooth if Android APP.
b. croos tavpment open “eDraw” APP, click the Menu bar “Equipment” -> “iNote”;
c. New the Notebook click “ ” to new my notebooks, please enter the Notebook name.
d. New notes Click the notebook to note interface, thenclick the * + ” on the top right corner to new note. (Suggest after Bluetooth successfully connected, then enter note name)
e. Bluetooth Connection “ eDraw ” APP will automatically scan the SmartPad and connected.
FAQ
If fail to connect, how to do?
A: You can try below methods
- Reset the device by inserting apin into the “RESET” hole for 3 seconds.
- Remove the device from eDraw APP- About-My equipment.
- Turn on your phone Bluetooth again
- Restart eDraw APP and make sure it is lastest version.
f. Take Notes
When the indicator light highlights once, it means Blustooth connected
successfully and it enters synchronous writing mode. Write on the SmartPad,
meanwhile it synchronizes on this board
Suggest enter note name, then take notes.
After notes, please click the “ ” onthe top right corner to save or press
the power button for
0.55 and release, now the indicator light flashes 3 times to save the notes ,
meanwhi le empty the notes on +ha GmartDad
g. Manage My Notebooks It can move, recompile, and delete the notes and so on,
(3). Two methods to store the notes , as follows : a. Synchronize note After
Bluetooth connected successfully, notes will synchronize on APP board.
b. Upload historical works After new my notebook, click upload history Notes,
then follow the pop-up prompt to complete. “+ on the top right corner and
select
2. Windows and Mac Operation Instructions
Turn on the SmartPad and connected to PC via USB line, PC bottom right will pop up successfully install the device driver, now you can use. Writing SmartPad equals input unit of SWARTPAD, now the yellow indicator light is on. When the pen is within the SmartPad work area, the yellow indicator light will highlight.
Charging
Charging for SmartPad
When the SmartPad is off, connect one end of USB cable to the SmartPad
charging port, the other end to PC. The red indicator light is on when
charging; light will goes off when full charged
Note: Please charge first when the red indicator |ight blinks means low
battery.
Charging for Pen
Unplug the silicon USB cover and then connect one end of USB cable to the pen
charging port, the other end to PC. The red indicator light is on when
charging; light will goes off when full charged
Caution : Do not disassemble, impact, or put it into fire. If there
severe bulging, please do NOT continue to use. Do not put it in igh-
temperature environment.
Parameter
SmartPad Dimension : 261%210%10 mm
SmartPad Capacity : 460mAh
Input : 5V/1A
Charging Time: About 2-3 hours
Available time : About continuous use for 24 hours
Memory Storage : About continuous use for 8 hours
Pen Dimension: 157.0%14. 55m
Pen Capacity: 80mAh
Input : 5V/1A
Charging Time : About 1-2 hours
Available time : About continuous use for 200 hours
Induction Method : Electromagnetism
Paper Size : A5
Maximum Identification of paper thickness : 15m
Connection Type : Bluetooth 4.0/UsB
For more information, please contact our support team:
[email protected]