BIC DV62si 2-Way Surround Speaker Owner’s Manual

BIC DV62si 2-Way Surround Speaker

SPECIFICATIONS

• Design: Type: Two-way, “venturi” tuned-vent bookshelf
• Drivers:
  • Woofer: 6 1/2˝ poly/graphite woofer, custom-designed
  • Tweeter: 3/4˝ poly soft dome tweeter
• Recommended Power: 10-175 watts per channel
• Frequency Response: 43Hz – 21kHz (+/- 3dB)
• Sensitivity: 90 dB
• Input Terminals: Gold-plated terminals
• Impedance: 8 ohms
• Dimensions:
  • Height: 14 1/4˝
  • Width: 8 7/8˝
  • Depth: 9 1/8˝
• Weight: 31 lbs per pair
• Warranty: 7 Year – Parts

Unpacking

Carefully remove your new B.I.C speakers from the box. Inspect the speakers for transit damage. If you discover damage, contact your dealer immediately. Save your carton – it is the best possible protection for your speakers should you ever have a need to move them.

Surround Sound Listening Setups

Refer to Figures 1 and 2 for 5.1 and 7.1 speaker placement. The rear-channel surround speakers should be positioned behind and slightly to the sides of the viewer/listener as shown in Figure 1, or to the sides as shown in Figure 2. It may take some experimentation with different locations for the surround speakers to suit your preference and your room.

Rear Surround Placement

Side Surround Placement

Hooking Up Your New Speakers

STOP! – Make sure that you consult your amplifier’s owner’s manual regarding speaker hook-up. Your amplifier should be turned off throughout this procedure.

A word about speaker wire – There are a number of quality speaker wire products available today. Most of these products offer obvious cosmetic benefits over lamp cord and light gauge wires. The DV62si speakers come equipped with inputs that allow the greatest flexibility and choice of hook-up wire and connectors. The choice of speaker wire is dependent on the type of amplifier, the distance you intend to run the wire, and your budget, among other things. If in doubt as to which brand or type of wire and connector to use, consult your audio dealer.

Most speaker wire is polarity coded. This means that each conductor is labeled either (+) positive or (-) negative. The (+) positive side may be a different color or texture than the (-) negative side. On the back of your amplifier, each channel is probably labeled (+) and (-) as well as color coded red for (+) positive and black for (-) negative. B.I.C speaker terminals are color coded red for (+) positive and black for (-) negative. Be sure to hook (+) to (+),(red to red), and (-) to (-), (black to black). (See Figure 4.)

All connections should be tight and close fitting.Inspect connections for frays and stray strands of wire touching both (+) and (-) terminals. (This will cause a short and, perhaps, damage your equipment.)

Caring for Your Speakers

B.I.C speaker cabinets are finished with a very high quality laminate covering that is both attractive and serves as excellent protection for the wood cabinet. The cabinet can be cleaned with a damp, soft cloth or you may use a high-quality furniture polish to maintain the original luster. Use a soft brush or hand vacuum cleaner on the grille material.

Troubleshooting and Service

• B.I.C speakers do not use external fuse protection or circuit breakers because these devices tend to impede sound quality and may only protect the speaker to a marginal degree. Rather, we use components and designs of the highest caliber as an effective method of protecting the speaker. However, no amount of protection will prevent damage caused by defective associated equipment or extreme abuse.
• If your speaker has no output, first try to determine if it is indeed a speaker problem. Determine whether the problem exists in both speakers. If it does, the problem likely originates in some other component in the system. If the problem is in one speaker only, reverse your speaker leads (left to right, right to left). If the problem moves to the other channel, the issue is not the speakers.
• If you have determined that your speaker is not functioning properly, or you have questions, please contact B.I.C America at 877-558-4242.

WARRANTY

B.I.C Speaker Systems are designed to the highest possible value and performance standards. Our confidence in their quality is such that B.I.C America offers customers this transferable seven-year limited warranty:

B.I.C Speaker Systems Seven-Year Limited Warranty

If the B.I.C speaker system proves to be defective in materials or workmanship within seven years from the date of the original customer’s purchase, we will, at our option, repair or replace the defective product.

DISCLAIMER

THE WARRANTY STATED HEREIN IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER LIABILITIES AND OBLIGATIONS OF B.I.C AMERICA, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. B.I.C AMERICA HAS NOT MADE AND DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION, WARRANTY OR COVENANT WITH RESPECT TO THE CONDITION, QUALITY, DURABILITY, DESIGN, OPERATION, CAPACITY, FITNESS FOR USE OR SUITABILITY OF THE B.I.C AMERICA SPEAKER SYSTEMS.

Exclusion of Certain Damages

B.I.C America’s liability for any defective product is limited to repair or replacement of the product at our option. B.I.C America shall not be liable for incidental or consequential damages of any kind or character because of product defects. Some states do not allow limitations on implied warranties and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply.

This Warranty Does Not Cover:

• Damage caused by abuse, accident, misuse, negligence, or improper operation.
• Products that have been altered or modified.
• Any product whose serial number has been altered, defaced, or removed. Normal wear and maintenance.
• Damages caused by shipping. (All claims for shipping damage must be made with the carrier.)

Warranty Service

• Warranty service must be performed by an authorized service center, usually a B.I.C America speaker systems dealer or its authorized agent. You may obtain a list of authorized service centers by calling the number below.
• All warranty repairs must be accompanied by the original bill of sales. No other document is acceptable or is required.
• This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
• Due to our continual efforts to improve product quality as new technology and techniques become available, B.I.C America reserves the right to revise Speaker Systems specifications without notice.

B.I.C America

• Brand: B.I.C America
• Address: 925 N. Shepard Street, Anaheim, CA 92806
• Website: www.bicamerica.com
• Tech Support: 1-877-558-4242 (4BIC)

Please describe the problem in detail. We will decide on the most appropriate course of action.

FAQs

What is the warranty for BIC DV62si Speakers?

BIC Speaker Systems come with a seven-year limited warranty. If a defect occurs within seven years from the original purchase date, BIC America will repair or replace the product.

Are there any exclusions to the warranty?

The warranty does not cover damage due to abuse, alteration, shipping, or wear and maintenance.

How can I obtain warranty service for my BIC DV62si Speakers?

Can I use the BIC DV62si Speakers with any type of amplifier?

The BIC DV62si Speakers have a recommended power range of 10-175 watts per channel. Ensure your amplifier falls within this range for optimal performance.

Is it necessary to use high-quality speaker wire with the DV62si Speakers?

While high-quality speaker wire is recommended, the choice of wire can depend on factors like your amplifier type, wire distance, and budget. Consult your audio dealer if you're unsure which wire to use.

How do I clean the grille material of the BIC DV62si Speakers?

To clean the grille material, use a soft brush or a hand vacuum cleaner.

Can I move my BIC DV62si Speakers without the original carton for protection?

While it's recommended to keep the original carton for moving the speakers, you can use alternative packing materials to ensure their safety during transport.

What should I do if I encounter shipping damage to my BIC DV62si Speakers?

In the case of shipping damage, contact your dealer immediately.

What should I do if my BIC DV62si Speakers have no audio output?

First, determine if it's a speaker problem. If both speakers have no output, the issue may originate from another component in your audio system.

Are there any fuses or circuit breakers on the BIC DV62si Speakers?

BIC speakers do not have external fuse protection or circuit breakers as these devices can impact sound quality. Instead, high-quality components are used for protection.

What is the warranty period for BIC DV62si Speakers?

BIC America offers a seven-year limited warranty for these speakers.

Can I reverse the speaker leads if I suspect an issue with one channel of my BIC DV62si Speakers?

Yes, you can reverse the speaker leads (left to right, right to left) to determine if the issue moves to the other channel.

Download This PDF Link:BIC DV62si 2-Way Surround Speaker Owner’s Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>