Niles LS1 Automated Light Sensor Specifications and Datasheet
- June 13, 2024
- Niles
Table of Contents
Niles LS1 Automated Light Sensor
Introduction
The Niles LS1 Automated Light Sensor is a versatile device designed to respond to changes in ambient light and activate or control electronic audio/video components accordingly. This innovative sensor allows for seamless integration into your home entertainment system, enhancing automation and convenience by triggering actions based on the brightness of component front-panel displays. With adjustable sensitivity and compatibility with a wide range of audio/video equipment, the LS1 offers precise control and customization for an optimal viewing and listening experience.
Light Sensor
- Includes 12Volt AC power supply
- Light-Triggered
- Individually boxed
FEATURES
- LS-1 is activated by the presence of light
- LS-1 senses a component’s on/off status by the change in brightness of the component’s front-panel display. When the display is brighter, the LS-1 outputs a continuous 12Volt DC up to 400mA
- The adjustable “sensitivity” feature allows precise trigger-level control and optimum front-panel placement
- Works with virtually all electronic audio/video components
SPECIFICATIONS
- Brand: Niles
- Power Source: Corded Electric
- Item Weight: 0.65 Pounds
- Product Dimensions: 3.5 x 2.5 x 1.63 inches
- Item Weight: 10.4 ounces
- Item Model Number: LS-1
- Dimensions:
- Width: 3-1/2 inches
- Height: 2-1/2 inches
- Depth: 1-5/8 inches
- Light Sensing System
- LS-1
- Stock Number: FG00728
Product Detail
Use LS-1 to provide the status of a component to the IntelliControl® Home Theater Automation System.
Product Components
- 12V DC POWER SUPPLY (INCLUDED
- PLACED ON FRONT PANEL DISPLAY
- AUDIO/VIDEO COMPONENT
- LS-1 LIGHT SENSOR
- CONTROL OUTPUT CABLE
INTELLICONTROL MAIN SYSTEM UNIT (FOR OTHER DEVICES REQUIRING 12V DC CONTROL INPUT)
LS-1 Light sensor, light-triggered
- Product: 12-volt output device that issues a 12-volt DC signal when its photodiode senses light.
- Design intent : Senses a component’s on/off status by the change in brightness of the component’s front panel display.
- Common application: A receiver or pre-amp with no switched outlet. Place the photodiode over a receiver’s front panel display. The 12-volt output of the LS-1 would then be connected to a Niles AC-3 or AC-6+.
Product Usage Instructions
The Niles LS1 Automated Light Sensor is a convenient device designed to activate and control electronic audio/video components based on changes in ambient light. Follow these usage instructions to maximize its functionality:
- Position the LS1 sensor in a location where it can effectively detect changes in ambient light. Typically, this is near the front-panel display of your electronic components.
- Ensure that the LS1 is properly connected to a power source using the provided corded electric connection.
- The LS1 features an adjustable “sensitivity” setting. Use this setting to fine-tune the trigger level for the sensor.
- To adjust sensitivity, use a small screwdriver or similar tool to turn the sensitivity control on the LS1. You can increase or decrease the sensitivity as needed.
- The LS1 is designed to work with virtually all electronic audio/video components that have front-panel displays.
- Verify that your components have a suitable front-panel display for the LS1 to detect.
- The LS1 is activated by changes in the brightness of the front-panel display of your components.
- When the display becomes brighter (such as when the component is turned on), the LS1 will respond.
- The LS1 outputs a continuous 12-volt DC signal with a maximum current of up to 400mA when triggered by the presence of light.
- You can connect this output to other devices or components that respond to a 12-volt trigger signal, such as motorized screens, amplifiers, or other automation equipment.
- Test the functionality of the LS1 by observing its response to changes in ambient light and its output to connected devices.
- Verify that it triggers the desired actions in your audio/video system when components are powered on or off.
- Depending on your setup, you can customize the LS1’s sensitivity to ensure it responds optimally to changes in ambient light.
CARE AND MAINTENANCE
To ensure the optimal performance and longevity of your Niles LS1 Automated Light Sensor, it’s important to follow proper care and maintenance practices. Here are some guidelines:
- Cleaning : Periodically clean the sensor’s lens and housing with a soft, lint-free cloth. Avoid using abrasive or harsh cleaning agents that may scratch the surface.
- Avoid Direct Sunlight : Install the sensor away from direct sunlight or any other intense light sources. Direct exposure to strong light could affect its performance.
- Adjust Sensitivity : Depending on your setup and preferences, you may need to adjust the sensitivity of the LS1. Use the adjustable sensitivity feature to fine-tune trigger-level control. Experiment with different settings to find the optimal configuration for your components.
- Regular Testing : Periodically test the sensor’s functionality by monitoring how it responds to changes in ambient light. Ensure that it consistently triggers the desired actions in your audio/video components.
- Proper Placement : Install the LS1 in an appropriate location, ensuring that it can effectively sense changes in light caused by the front-panel display of your components. Follow the manufacturer’s recommendations for placement.
- Avoid Obstructions : Ensure that the sensor’s lens is not obstructed by dust, debris, or any other objects. A clear line of sight to the front panel display is essential for accurate performance.
- Power Supply : Verify that the LS1 is receiving power from a compatible source (12V DC, up to 400mA) and that the power connection is secure.
- Compatibility : Confirm that the LS1 is compatible with your specific electronic audio/video components. It is designed to work with most devices, but it’s essential to check for compatibility to ensure seamless integration.
By following these care and maintenance practices, you can maximize the performance and reliability of your Niles LS1 Automated Light Sensor, ensuring it continues to enhance the automation and convenience of your home entertainment system.
NILES AUDIO CORPORATION
- Address: 12331 S.W. 130 Street, Miami, FL 33186
- Telephone: 800.259.4434
- Website: www.nilesaudio.com
- Reference Code: NALS1PDF
FAQs
What is the Niles LS1 Automated Light Sensor used for?
The Niles LS1 Automated Light Sensor is used to detect changes in ambient light and trigger actions in electronic audio/video components. It senses a component's on/off status by monitoring the change in brightness of the component's front-panel display.
How does the LS1 work?
The LS1 is activated by the presence of light. When the front-panel display of an electronic component becomes brighter (indicating that the component is turned on), the LS1 outputs a continuous 12V DC signal, making it ideal for automating various functions in your audio/video system.
Can I adjust the sensitivity of the LS1?
Yes, the LS1 features an adjustable sensitivity feature that allows precise trigger-level control. You can fine-tune the sensor to respond to changes in brightness according to your preferences and specific setup.
What types of electronic components is the LS1 compatible with?
The LS1 is designed to work with virtually all electronic audio/video components. It can be integrated into a wide range of devices, enhancing automation and convenience in your entertainment system.
Where should I place the LS1 for optimal performance?
To ensure optimal performance, place the LS1 where it can effectively sense changes in light caused by the front-panel display of your components. Follow the manufacturer's recommendations for placement.
How is the LS1 powered?
The LS1 is powered via a corded electric connection, receiving 12V DC power, and can output up to 400mA.
Can I use the LS1 with my existing home automation system?
The LS1 can be integrated into your home automation system to trigger actions based on changes in ambient light. Consult with your home automation provider to ensure compatibility.
Is the LS1 easy to install?
Installation of the LS1 is relatively straightforward. However, it's recommended to follow the provided installation guidelines and, if necessary, consult with a professional installer for assistance.
What are the dimensions of the LS1?
The LS1 has dimensions of 3.5 inches in width, 2.5 inches in height, and 1.63 inches in depth.
What are the typical applications for the Niles LS1 Automated Light Sensor?
The LS1 is commonly used in home theater and audio/video setups to automate functions such as turning on components, activating lighting, or triggering screen adjustments when a display is powered on.
Can I use the LS1 to control multiple components simultaneously?
Yes, you can use the LS1 to control multiple components in your entertainment system as long as they are within the sensor's detection range and share a common light source.
Is the LS1 compatible with both LED and LCD displays?
Yes, the LS1 is designed to work with both LED and LCD displays, as it detects changes in brightness rather than relying on specific display technologies.