HPG BM3D Mini Hi-Fi Stereo Bluetooth Speaker Instruction Manual
- June 13, 2024
- HPG
Table of Contents
Instruction Manual
Product Specifications
Power Rating: 3W
Frequency Response: 20HZ-20KHZ
THD: < 1%
S/N: > 80DB
Speaker Parameter: 4V 3W diameter 36mm
Battery: 3.7V / 400mAh
Product Size: 4.75” x 2 x 1.5”
Product Weight: 70g
Product Details
- Speaker
- Charging Base
- LED Indicator
- Charging Indicator
- Micro USB Charging Port
- Speaker Leash Hole
- Power Button
- Microphone
Product Set Up
- Turn on the speaker by pressing the power button for 3 seconds. The speaker will have a sound prompt and the blue LED light indicator will fiash.
- Turn on second speaker and wait for sound prompt.
- Double press the power button on one of the speakers.
- Connection sound is heard after speakers have successfully connected.
- After first pairing, speakers should automatically connect when you turn them both on.
Product Use
- After speakers have successfully paired together, turn on your devices Bluetooth.
- Search for device speaker name “BM3DE” and click to pair your deivce to the speaker.
- Speaker will have a sound prompt after successful connection.
- Turn off the speaker by pressing the power button for 4 seconds.
- Press the power button once to play/pause music.
- Press the power button once to answer/end phone calls.
Product Charging
- Insert the charging cable into the micro USB port on the product base.
- Connect the USB plug into a power source.
- Place speakers on charging base with metal pins properly aligned.
- Red LED lights will turn on when speaker is charging.
- When charging is complete, LED lights will turn off.
- Alternativly, plug the micro USB into the bottom of the speaker to charge.
- Speaker volume will lower when battery level is low.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution : Any changes or modiffcations not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
HPG Brands
Handstands Promo LLC
1770 S 5350 W STE 100 Salt Lake City, UT 84104
801-727-1400
https://hpgbrands.com/handstands/