iLive iTB474B Detachable Wireless Speakers Soundbar User’s Guide

iLive iTB474B Detachable Wireless Speakers Soundbar

Bluetooth HD Soundbar with Detachable Wireless Speakers

• User’s Guide for Model ITB474B v1146-02
• For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

Warnings and Precautions

FCC Warnings

• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT, AND FULLY INSERT.
• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing.
• CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
• WARNING: Use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior, move away from any fluorescent lighting, as it may be the cause.
• CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• WARNING: There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
• WARNING: Shock hazard – Do Not Open.
• Caution and marking information is located at the rear or bottom of the apparatus.
• Objects filled with liquids, such as vases, shall not be placed on the apparatus.
• The mains plug is used as a disconnect device and should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.
• Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
• This product is supplied with a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns and can lead to death.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not mix old and new batteries.
• Completely replace all old batteries with new ones.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and local guidelines.
• WARNING: This product may contain chemicals known to the State of California to cause birth defects or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.

Unboxing Your HD Soundbar

Features & Specifications

• 4 channel sound
• Supports Bluetooth
• Supports profile A2DP (Advanced Audio Distribution Profile)
• 2.4GHz wireless speakers
• Detachable satellite speakers with built-in lithium battery
• Digital volume control

Includes

• Remote control with 2 AAA batteries
• RCA stereo audio cable
• Wall-mount hardware and instructions
• AC/DC power adapter
• Remote
• Optical digital audio input
• 3.5mm audio input
• RCA stereo audio inputs
• LED pairing indicator
• LED source indicators
• Wall mountable
• Cloth speaker grill

Setup

Power

Plug the small end of the power cord into the DC Input on the back of the speaker, and the large plug into a standard wall outlet.

Remote Battery

Requires two AAA batteries (included).

Indicator Lights

Orientation

Speaker Inputs (Rear)

Speaker Controls (Front)

Remote Layout

• Power: Press to turn the unit on or off.
• Mute
  • Press to mute the volume.
  • Press to switch to Bluetooth Mode.
• Line: Press to switch to Line In mode.
• Optical: Press to switch to Optical mode.
• AUX: Press to switch to Aux In mode.
• Music: Press to switch to the EQ optimized for music.
• Movie: Press to switch to the EQ optimized for movies.
• Dialog: Press to switch to the EQ optimized for dialogue.
• Skip: In Bluetooth mode, press to skip forward or back one track.
• Play/Pause: In Bluetooth mode, press to play or pause a track.
• Volume +/-: Press to adjust the volume.
• Treble: Press to adjust the treble up or down.
• Bass: Press to adjust the bass up or down.
• Satellite Speakers: ON/OFF: Press to power the satellite speakers on or off.
• Volume -/+: Press to adjust the volume of the satellite speakers up or down.

Audio Inputs

Using the Stereo RCA Inputs:

1. Connect the RCA cables to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on the television.
2. Press the Power button to power on the unit.
3. Press the Source button to select AUX In, indicated by a white light.
4. Audio played through the television will now be heard through the speakers.

Using the Stereo RCA Inputs and the Subwoofer Output Together:

1. With the main stereo RCA cables connected, use another RCA cable to connect an external subwoofer to the Subwoofer Output.
2. When audio is played through any source, the speaker will automatically use the connected subwoofer.

Using the Optical Input:

1. Connect the Digital Optical Audio Cable to the optical output on the audio source and to the Optical Input on the speaker bar.
2. Press the Power button to power the unit on.
3. Press the Source button to select Optical In, indicated by an amber light.
4. Using the native controls on your connected device, make sure the audio settings are set to PCM or Optical Audio and are turned On.
5. Audio from the connected audio source will now be played through the speakers.

IMPORTANT TIPS FOR OPTICAL AUDIO:

• Use the correct toslink cable and make sure that it is firmly seated in both source and sound bar sockets.
• Optical output is activated on the source (they should see a red light emitting from the toslink socket). It may be labeled SPDIF in the settings menu of the source.
• The optical output is set to output PCM and not Dolby Digital.

Using the Line In (3.5 mm audio input cable not included):

1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit and plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source.
2. Press the Power button to power the unit on.
3. Press the Source button to select Line In, indicated by a green light.
4. Audio played through the connected device will now be heard through the speakers. Use the controls on the connected device to play, pause, or skip selected tracks.

Using the Stereo RCA Inputs – Rear View

Using the Optical Input – Rear View

Using the Line In-Side View

Bluetooth

Pairing a Bluetooth Device for the First Time:

1. Power on the unit by pressing the Power button.
2. Press the button on the remote to switch to Bluetooth Mode, indicated by a slowly flashing blue light.
3. Press the Pair button on the unit. The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the ITB474 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0.
5. When successfully paired and connected, a beep will issue from the unit, and the Pairing Indicator will display a solid blue light.

After the initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the above steps.

Playing Audio Wirelessly:

1. After pairing to a Bluetooth device, use the native controls on the connected Bluetooth Device to select a track.
2. Play, pause, or skip a selected track using the native controls on the connected Bluetooth Device or the controls on the speaker’s remote.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.

The Satellite Speakers

The Satellite Speakers

This unit is equipped with two detachable speakers that may be used to create a surround sound effect and lend an extra dimension to your listening experience. From the remote control, the speakers can be powered on or off, and change their volume independently of the main speaker.

Satellite Speaker Indicator Lights

Powering On the Satellite Speakers

The satellite speakers must first be powered on manually by turning the Power Switch on the speakers to On (see adjoining diagram). They should already be wirelessly connected to the main speaker and will be ready to play sound whenever you choose.

Powering On the Satellite Speakers

The satellite speakers must first be powered on manually by turning the Power Switch on the speakers to On (see adjoining diagram). They should already be wirelessly connected to the main speaker and will be ready to play sound whenever you choose.

Charging the Satellite Speakers

The satellite speakers are powered by internal lithium batteries and must be recharged after extended periods of use. To charge the satellite speakers, simply dock them with the main speaker unit, or use a Micro-USB cord (not included) to connect the Micro-USB charging port on the satellite speaker to a power source. A red light on the front of the speakers will indicate the speaker is charging. The initial charge time for the speakers is 6 hours.

Satellite Speakers (Left/Right)

Main Speaker Dock (Left)

Company Information

Contact Information:

• Website: www.iLiveElectronics.com
• Email Support: prodinfo@dpiinc.com
• Email Parts: partsinfo@dpiinc.com
• Phone Support: 1-888-999-4215

Warranty

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

International Support: To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at:

• Website: www.iLiveElectronics.com

Green Initiative

Our Environmental Commitment to “Protect for Today and Sustain for Tomorrow”. On a continual basis DPI, Inc. is making efforts to sustain the environment and improve the recyclability of its products and packaging.

Focusing on “protecting for today and sustaining for tomorrow” DPI, Inc. has committed to reducing packaging size, increasing the usage of recyclable plastics, and ensuring that packaging and manuals are made with up to 85% recycled material. In addition to material consideration, DPI, Inc. has also focused on the finer details that positively impact the environment such as employing the usage of soy-based inks.

DPI, Inc. also ensures that the factories that produce the company’s wide variety of consumer electronics adhere to environmentally friendly air and water restrictions. This is yet another example that every step of the way DPI, Inc. is making efforts to lessen any impact on the environment.

In 2011 DPI, Inc. also began conversations with Energy Star in order to ensure that the consumer electronics being produced meet high standards of energy efficiency. The ultimate goal is to keep energy costs for consumers low while providing quality, feature-rich products.

Copyright © 2014 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.

FAQs

How can I use the optical input on the soundbar?

Connect a Digital Optical Audio Cable to the optical output on your audio source and to the Optical Input on the speaker bar. Press the Optical button on the remote control to select Optical In mode.

What are the important tips for using optical audio?

Make sure to use the correct toslink cable, ensure it's firmly seated in both source and soundbar sockets, and activate the optical output on the source (usually indicated by a red light).

How do I use the Line In feature with a 3.5mm audio input cable?

Plug one end of a 3.5mm audio input cable into the Line In on the soundbar and the other end into the audio output/headphone output on your audio source. Then, press the Line button on the remote control to select Line In mode.

How can I play audio wirelessly through a connected Bluetooth device?

After pairing to a Bluetooth device, use the controls on the connected device to select a track. You can play, pause, or skip tracks using either the connected device's controls or the speaker's remote control.

How do I use the detachable satellite speakers?

The soundbar comes with two detachable satellite speakers. You can power them on or off and adjust their volume independently using the remote control.

What do the indicator lights on the satellite speakers signify?

The indicator lights on the satellite speakers indicate their status, including pairing, battery status, and whether they are connected to the main speaker.

How can I charge the satellite speakers?

The satellite speakers are powered by internal lithium batteries. To charge them, you can dock them with the main speaker unit or use a Micro-USB cord (not included) to connect the Micro-USB charging port on the satellite speaker to a power source. A red light on the front of the speakers will indicate that they are charging. The initial charge time for the speakers is 6 hours.

How can I check the battery status of the satellite speakers?

The indicator lights on the satellite speakers will show different colors to indicate their status. For example, a solid green light means they are paired to the main speaker, while a flashing red light indicates a low battery.

What is iLive Electronics' commitment to environmental sustainability?

iLive Electronics, under DPI, Inc., is committed to protecting and sustaining the environment. They focus on reducing packaging size, increasing the usage of recyclable plastics, and using up to 85% recycled material in packaging and manuals. They also use soy-based inks. Furthermore, they ensure that their factories adhere to environmentally friendly air and water restrictions.

How can I dispose of lithium batteries properly?

Lithium batteries, like all rechargeable batteries, should be recycled or disposed of according to state and local guidelines. They should not be disposed of in normal household waste and should never be incinerated, as they might explode. You can contact your local government for disposal or recycling practices in your area.

What should I do if I encounter interference with the remote control when using the soundbar near fluorescent lighting?

If the unit is displaying erratic behavior due to interference from fluorescent lighting, it's recommended to move away from any fluorescent lighting sources to resolve the issue.

Can I replace the batteries in the soundbar with standard alkaline batteries?

No, attempting to charge standard alkaline batteries in the unit can be dangerous. Only use rechargeable NiMH batteries as specified.

Download This PDF Link:iLive iTB474B Detachable Wireless Speakers Soundbar User’s Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>