iLIVE ISB243B Video Mate Wireless Speaker and Phone Holder User Guide
- June 13, 2024
- iLive
Table of Contents
iLIVE ISB243B Video Mate Wireless Speaker and Phone Holder
Video Mate Wireless Speaker & Phone Holder
Product Information
The Video Mate Wireless Speaker & Phone Holder (Model ISB243B v3070-01) is a versatile device that combines a wireless speaker and a phone holder. It allows you to enjoy audio playback and handsfree phone calls while conveniently holding your smartphone.
Features:
-
Charging Indicator
-
DC Power input
-
Phone Holder
-
Microphone
-
LED Indicator: Indicates Bluetooth connection status.
-
Vol -/Previous: Press to decrease the volume. Press and hold down to return to the previous track.
-
Vol +/Next: Press to increase the volume. Press and hold down to skip to the next track.
-
Play/Pause/Answer/Pair: Press to pause or resume playback.
Press to answer and hang up phone calls with handsfree speakerphone. Press twice to disconnect and connect Bluetooth. -
Power on/off: Press and hold down to power the Bluetooth speaker on/off.
Includes:
- Micro-USB to USB cable (for charging)
Controls and Functions:
| Control | Description |
|---|---|
| Charging Indicator | Indicates the charging status of the speaker. |
| DC Power input | Connects the speaker to a power source for charging. |
| Phone Holder | Holds your smartphone securely in place. |
| Microphone | Enables handsfree phone calls. |
| LED Indicator | Indicates the Bluetooth connection status. |
| Vol -/Previous | Press to decrease the volume. Press and hold down to return to |
the previous track.
Vol +/Next| Press to increase the volume. Press and hold down to skip to
the next track.
Play/Pause/Answer/Pair| Press to pause or resume playback. Press to answer and
hang up
phone calls with handsfree speakerphone. Press twice to disconnect
and connect Bluetooth.
Power on/off| Press and hold down to power the Bluetooth speaker on/off.
Product Usage Instructions
Battery Power:
- Charge the speaker fully before use. The charge time is approximately 4 hours.
- When the speaker is charging, the Charging Indicator will display a solid red light. When charging is complete, the indicator will turn off.
- To charge the speaker, use the included Micro-USB to USB cable. Connect the DC Power input on the speaker to the USB port of a powered-on computer or USB power adaptor (not included).
Positioning the Phone Stand:
Note: This mobile device stand is only suitable for smartphone devices under 6.8 inches. It cannot support tablets.
- Raise or lower your phone by sliding the arm of the phone stand up or down.
- Adjust the angle using the hinges at the base or at the top of the phone holder.
Phone Calls:
This speaker supports handsfree phone calls in Bluetooth mode.
When connected to your phone, press the Play/Pause/Answer/Pair button to
answer a phone call.
Voice Prompts:
This speaker offers voice prompt assistance. To turn voice prompts on/off, press and hold down the Vol +/Next and Vol -/Previous buttons at the same time for five seconds.
Removing the Phone Stand:
Detach the phone stand from the speaker by gripping the base of the phone
stand. Pull it directly out. Avoid yanking or pulling at an angle to prevent
damage to the stand or speaker.
Bluetooth Wireless Pairing & Playing Audio:
- When powered on, the speaker will enter Bluetooth Mode automatically.
- Using the Bluetooth setting on your device, search for new devices and select ISB243. Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
- When successfully paired, a voice prompt will announce the connection and the LED Indicator will display a solid blue light.
- Use the controls on the connected device to select and begin playing audio. Use the controls on the speaker or the connected device to play, pause, and adjust volume.
Note: The speaker will automatically connect to the last paired device when powering on. If your device becomes unpaired or it is unable to connect, press the Play/Pause/Answer/Pair button two times to enter pairing mode. A voice prompt will announce Bluetooth is connecting and the LED Indicator will start flashing blue. Start from step two to connect to your device.
Customer Support:
- Customer Service: 1-888-999-4215
- Email Support: prodinfo@dpiinc.com
- Email Parts: partsinfo@dpiinc.com
Video Mate Wireless Speaker & Phone Holder
User’s Guide for Model ISB243B v3070-01
Features
- Bluetooth v5.0
- Portable mini speaker
- Removable phone stand
- Built-in microphone
- Handsfree calling
- Playtime: up to 10 hours
Includes
- Micro-USB to USB cable
- User manual
Controls and Functions
- Charging Indicator
- DC Power input
- Phone Holder
- Microphone
- LED Indicator: Indicates Bluetooth connection status.
- Vol -/Previous: Press to decrease the volume. Press and hold down to return to the previous track.
- Vol +/Next: Press to increase the volume. Press and hold down to skip to the next track.
- Play/Pause/Answer/Pair: Press to pause or resume playback. Press to answer and hang up phone calls with handsfree speakerphone. Press twice to disconnect and connect Bluetooth.
- Power on/off: Press and hold down to power the Bluetooth speaker on/off.
Battery Power
Charge fully before use. The charge time is approximately 4 hours.
When the unit is charging, the Charging Indicator will display a solid red
light. When charging is complete, the indicator will turn off.
Using a Micro-USB to USB cable (included), connect the DC power input on the
speaker to the USB port of a powered-on computer or USB power adaptor (not
included) to charge the speaker.
Positioning the Phone Stand
Note: This mobile device stand is only suitable for smartphone devices
under 6.8”. It cannot support tablets.
Raise or lower your phone by sliding the arm of the phone stand up or down.
Adjust the angle using the hinges at the base or at the top of the phone
holder.
Removing the Phone Stand
Detach the phone stand from the speaker by gripping the base of the phone
stand. Pull directly out. Avoid yanking or pulling at an angle to prevent
damage to the stand or speaker.
Bluetooth Wireless
Pairing & Playing Audio
- 1. When powered on, the speaker will enter Bluetooth Mode automatically.
2. Using the Bluetooth setting on your device, search for new devices and select ISB243. Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
3. When successfully paired, a voice prompt will announce the connection and the LED Indicator will display a solid blue light.
4. Use the controls on the connected device
to select and begin playing audio. Use the controls on the speaker or the connected device to play, pause, and adjust volume.
Note: The speaker will automatically connect to the last paired device when powering on. If your device becomes unpaired or it is unable to connect, press the Play/Pause/Answer/Pair button two times to enter pairing mode. A voice prompt will announce “Bluetooth is connecting” and the LED Indicator will start flashing blue. Start from step two to connect to your device.
Phone Calls
This speaker supports handsfree phone calls in Bluetooth mode. When connected
to your phone, press the Play/Pause/Answer/Pair button to answer a phone call.
Voice Prompts
This speaker offers voice prompt assistance.
To turn voice prompts on/off, press and hold down the Vol +/Next and Vol
-/Previous buttons at the same time for five seconds.
Customer Support
Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
For Warranty Information and the most up-to-date version of this User’s Guide,
go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or to get
answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Copyright © 2023 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
Safety Warnings.
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING : Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Do not place foreign materials, such as metal objects, magnets, or the like, between a mobile device and the charging surface. This may interrupt charging and may cause damage from overheating.
- Only use with the included power supply.
WARNING: This product can expose you to chemicals including lead, which
is known to the State of California to cause cancer and birth defects or other
reproductive harm.
For more information go to
www.P65Warnings.ca.gov. This product meets
and complies with required Federal product guidelines.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.