Zest 25221 Ladder Planter Instruction Manual

June 13, 2024
Zest

Assembly Instructions
Ladder Planter
Code: 25221
V2Zest 25221 Ladder Planter (W x D x H) 0.79m x 0.61m x 1.38m

25221 Ladder Planter

ONLINE ASSEMBLY VIDEO AVAILABLE
Please scan the QR code or visit zestoutdoorlivingsupport.co.uk
PLEASE KEEP THESE INSTRUCTIONS

http://zest4leisuresupport.co.uk/www.fsc.org

Every Zest product is unique because each piece of timber has its own distinctive, natural features.
Zest sources all of its timber from responsibly-managed forests and everything it designs and produces meets the highest standards of sustainability. Zest ensures that all timber and timber-related products are certified to Forestry Stewardship Council (FSC®).
This is vital not only for the health of the planet, but also shows Zest’s commitment to the environment and to responsible sourcing. Timber is a natural material and, as such, will fit beautifully within any outdoor space.
This also means that all Zest pieces are unique because every piece of timber has its own distinctive features.
Natural and Unique…
Changes in temperature and humidity will cause expansion and contraction so Zest products need time to adjust to where the owners live. A few splits or cracks are part of the maturing process and will not affect strength or durabilityKnots embedded in the wood are natural and tell the story of the tree which made them. Customers may notice variations in colour but, once out in the garden and exposed to the sun, colour and shading will even out.
Most Zest products are pressure treatedwhich protects the timber from rot andmeans customers will be able to enjoy theproducts in their garden for many years.
Fresh pressure treatment sometimes leads to a small amount of greenspotting on the surface of new timber as the natural salt leaves the wood. This will fade away over time and is in no way detrimental to quality or durability.
Splits and cracks occur naturally in the timber grain due to changing temperatures and humidity levels. They are not usually a cause for concern as they don’t affect the strength or durability of the product. If however, a 2p coin can fit into the split or crack there may be an issue so it should be reported to the retailer in writing with photographic evidence.Zest 25221
Ladder Planter - Fig The benefits of slow grown timber
Slow grown timber from Eastern Europe is ideal for timber garden furniture. It produces a stronger grain in the wood giving it more durability and is said to be as strong as some hard woods. Zest 25221 Ladder Planter - Fig
1Normal splits are characteristics of timber.
Knots are characteristicsof timber.
Sun Bleaching & Green Spotting are not causes for concern and they will fade over time when items are placed outdoors.
Should you find a large split or dead knot, please email a photo to your retailer for investigation.

Ladder Planter Assembly Instructions

Requires 2 Person assembly
Tools required: Corded / cordless drill, 3mm Drill bit, Pozi- drive bit / Screwdriver.
(All screw holes to be pre-drilled)
Please take a few moments to check all pack contents listed

Ladder Planter Pack List

Code| Item| Description| Quantity
32445| A| Trough| 4
35452| B1| Siderail (Left)| 1
35453| B2| Siderail (Right)| 1

35454 – Ladder Planter Fixings List

Item Description Quantity
1 20mm Screws 4
2 40mm Screws 4
3 60mm Screws 16
4 ‘L’ Bracket 2

Zest 25221 Ladder Planter - Fig 2This product is made from pressure-treated timber. It should not be painted or coated with any other treatment until at least 6 months after purchaseZest 25221 Ladder
Planter - Fig 3Set out Side Rails B1 & B2 as shown in Fig. 1a. Place 1x Trough (A) onto lowest battens making the trough flush with the back of the side rail and fix using 4x 60mm screws (2x 60mm screws at each end, pre drilling them first).
Note: Ensure screws are located into base board of Trough (A)Zest 25221
Ladder Planter - Fig 4Place second Trough (A) onto subsequent battens and fix as described in instruction 1.Zest 25221 Ladder Planter - Fig 5Set out Side Rails B1 & B2 as shown in Fig. 1a. Place 1x Trough (A) onto lowest battens making the trough flush with the back of the side rail and fix using 4x 60mm screws (2x 60mm screws at each end, pre drilling them first).
Note: Ensure screws are located into base board of Trough (A)Zest 25221
Ladder Planter - Fig 6Should you wish to secure this to a wall or post, you can use the L bracket supplied as shown.Zest 25221 Ladder Planter - Fig 7 Your Ladder Planter is now complete

www.zestoutdoorliving.co.uk
01352 752555 option 1
sales@zestoutdoorliving.co.uk

Documents / Resources

| Zest 25221 Ladder Planter [pdf] Instruction Manual
25221 Ladder Planter, 25221, Ladder Planter, Planter
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals