SHARETRONIC W027 Smart Watch User Manual
- May 15, 2024
- SHARETRONIC
Table of Contents
- WATCH OVERVIEW
- PACKAGE CONTAINS
- CHARGING THE SMART WATCH
- POWER ON
- WATCH NAVIGATION
- HOME SCREEN NAVIGATION
- BUTTON NAVIGATION
- APP DOWNLOADING
- CONNECTION AND PAIRING
- BLUETOOTH PHONE CALL
- QUICK SETTINGS
- SPECIFICATION
- MAINTENANCE INSTRUCTIONS
- SAFETY INSTRUCTIONS
- DISPOSAL AND RECYCLING INFORMATION
- REGULATORY INFORMATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
USER MANUAL
Please refer to this manual before using the product
WATCH OVERVIEW
- Sport
- Messages
- Weather
- Camera
- Music
- Clock
- Breathe
- Al Voice
- Games
- Calculator
- Setting
Features might change after OTA upgrade
PACKAGE CONTAINS
CHARGING THE SMART WATCH
Before using your smart watch for the first fime, charge the battery to ts
full capacity. Use the charging able provided with the watch to charge.
TO CHARGE SMART WATCH
-
Plug the USB cable into a power adaptor and the.
adaptor into an electrical socket.
(Power adaptor not included). -
Place the magnetic charger on the magnetic charging points of the watch
Note: While your watchis charging, the screen will show its progress. -
Once the battery is fully charged, remove the charger.
On a single charge, smart watch can last up to 7 days of use and 2 days vith calling Notes The battery lfe and time to fully charge your device may vary s per usage and other factors.
POWER ON
Press and hold the side button for a few seconds to turn on the watch.
POWER OFF
Press and hold the side button for a few seconds.
Select ‘Power Off’ and confirm to power off.
WAKING UP THE WATCH
To preserve battery, the watch screen turns off when not in use.
Turn the screen back on by:
- Pressing the side button
- Turn on the rise to wake feature
WATCH NAVIGATION
The Smartwatch has a TFT touchscreen.
Navigate the watch by tapping on the screen, swiping side to side, up and down
and by pressing the crown.
HOME SCREEN NAVIGATION
The home screen is the watch face.
From the home screen:
- Swipe right to turn on the Bluetooth calling.
- Swipe left to access menu bar.
- Swipe up to go to quick settings.
- Swipe down to check message notifications.
BUTTON NAVIGATION
- Press the crown to turn on the watch display.
- Press the crown to go to the main menu.
- Press the crown to exit a feature.
APP DOWNLOADING
Download and install the’FitCloudPro”app from’Apple Store”or”Google Play
Store” or Use your phone toscan the following QR code.
https://qr21.cn/CPE9oM
Note : The operating system of your mobile phone must be Android 4.0
oriOS 9.0,or later.
CONNECTION AND PAIRING
Open the “FitCloudPro”app and Click on “Add ADevice’on the next interface,
Select your device from the list(Bluetooth name:W027)
BLUETOOTH PHONE CALL
After connecting the Smart Watch to the phone, you can usethe watch to dial to
control the phone for making calls and answering the phone calls.You can also
view the call history of the watch.You need to keep the connection between the
watch and the phone stable when using the Phone Call function.
ACTIVITY
Tap on Activity to get a detailed daily activity report on steps taken,
calories burned and distance covered. You can set or edit your daily activity
goals on the Da Fit app while setting up the watch.
HEART RATE
Select the heart rate feature to start measuring Ensure that there is no gap
between the back panel of the watch and the wrist. Hold still while it
measures your heart rate.
SLEEP
Tap Sleep to view your previous sleep duration. You can view your most recent
sleep records and sleep quality in various sleep stages on Da Fit app.
BLOOD OXYGEN
The smartwatch supports viewing the highest and lowest values of blood oxygen
levels of the day. Ensure that there is no gap between the back panel of the
watch and the wrist. Hold still while it measures your blood oxygen level.
SPORT
Tap on Sport and select your preferred form of sport.
MESSAGES
Tap on messages to see your new messages.
WEATHER
The Smatwatch supports 5-day weather viewing in a location of your choice as
long as it is synced with the NoiseFit app.
You can view today’s current weather and for the next 4 days as well. Go to
the NoiseFit app, select ‘Devices’ and click on ‘Weather settings’ to enable
the feature.
CAMERA
Control your camera remotely from the watch.Turn on the feature on the app.
Music
You can control your favourite songs and podcasts that play from your phone,
right on your wrist as long as the watch is connected to the Da Fit app on
your phone. You can play/pause music and go to the next/ previous track.
CLOCK
Tap on Clock to access your stopwatch, alarms and timer.
CALCULATOR
You can use this feature to do a basic calculation on your watch.
SETTINGS BRIGHTNESS
You can set the brightness as per your preference.
POWER OFF
You can select this option to power off the watch.
RESET
You can choose to reset. Do note if you choose to reset, all your data and
settings will be erased.
RESTART
You can also choose this option to restart the watch.
FIND PHONE
You can use this feature to find your phone as long as the watch is synced
and paired with your phone within a Bluetooth range.
APP
You can use this feature to scan the app and download the app on your
smartphone.
QUICK SETTINGS
You can swipe up from the watch’s home screen to gain quick settings access.
- Style switch
- Display
- Battery
- Vibration intensity
- Language
- QR code
- Time setting
- Password
- System
SPECIFICATION
Display: | 1.43” Amoled |
---|---|
Resolution: | 466*466 |
Battery: | 260 mAh |
Bluetooth: | 5.2 |
APP: | FitCloud Pro |
Material: | Zinc Alloy Frame+Plastic Back Case |
Wristband material: | Silicone |
Wristband size: | 22mm |
Motor: | Support |
Speaker: | Support |
Mic: | Support |
MAINTENANCE INSTRUCTIONS
- Keep the device dry and clean regularly and especially after prolonged use as moisture and dirt can build up underneath the band and can cause skin irritation.
- Do not wear the device too tight but make sure that the bottom sensor is lightly in contact with your skin and there is a gap of about one finger’s width between the wrist strap and your wrist.
- Do not use household cleaners to clean the device. Use soap-free cleaners instead.
- For stains that are difficult to remove, it is recommended to scrub with alcohol.
- The device is not suitable for diving, swimming in the sea or sauna; it is suitable for swimming pools, showers (cold water) and swimming in shallows.
- Keep it away from direct sunlight, high temperatures or humid conditions as it may damage the band over time.
SAFETY INSTRUCTIONS
+ Do not disassemble the battery on your own.
«Do not expose Smart Watch to extremely high or low temperatures. Excessive
temperature during charging could cause heat, smoke, fire or deformation of
the battery or even explosion.
« Charge the battery in a cool, ventilated room.
+ Do not open, crush, bend, deform, puncture or shred secondary cells or
batteries. In the event of a battery break or leak, prevent battery liquid
contact with skin or eyes. If this happens, immediately flush the areas with
water (DO NOT RUB THE EYE) or seek medical help.
«Do not short-circuit. Short-circuiting may damage the battery. Short-
circuiting can occur when a metallic object, such as coin, causes the direct
connection of positive and negative terminals of the battery.
« Keep the batteries out of children’s reach and in a safe place to prevent
danger.
+ Do not place the batteries in the water.
« Do not use your product in a sauna or steam room.
+ Do not dispose of batteries in the fire as that may cause an explosion.
Dispose of used batteries in accordance with your local regulations. Do not
dispose of it as household waste.
+ Use only the charging cable supplied to charge the battery. Do not charge
for more than 24 hours.
«Do not attempt to repair or maintain the watch yourself, service and
maintenance should be performed by authorised technicians only. Any device
failure should be referred to our after-sales service personnel.
« To prevent device damage, accessory damage and device failure, always
protect the device against strong impact or shock.
DISPOSAL AND RECYCLING INFORMATION
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return the electrical and electronic devices
at the end of their service lives to the public collecting points set up for
this purpose or point of sale. Details
of this are defined by the national law of the respective country. By
recycling, reusing materials or other forms of utilising old devices, you are
making an important contribution to protecting our environment
REGULATORY INFORMATION
USA: Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
This device may cause harmful interference, and this device must accept any
interference received, including interference that may cause undesired
operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference ina residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.However, there is no guarantee that interference will not occur
in a particular installation.
If this 76 equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
Max is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The watch contains small components that could be a choking hazard and are not
intended for use by small children or pets. Unless otherwise specified,
devices and services are not medical devices and are not intended to diagnose,
treat, cure or prevent any disease. We develop products and services to track
daily activity and wellness information as accurately as possible. The
accuracy of devices is not intended to be equivalent to medical devices or
scientific measurement devices.
In some cases, prolonged use of products may cause skin irritation. Prolonged
contact may contribute to skin irritation or allergies. To reduce the
possibility of irritation, keep the watch and watch band clean and dry.
Don’t wear it too tight and give your wrist a rest by removing the watch after
an extended period of wear. If you feel soreness, tingling, numbness, burning
or stiffness in your hands or wrists while or after wearing the watch, please
immediately discontinue use.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and,if not installed and used in a ccor dance with the
instructions, may cause harmful interference to radio
communications.However,there is no guarantee that interference will not occur
in a particular installation.If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modiffcations to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
Conditions:
- This device may not cause harmful interference, and
- this device must acceptany interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limit sset forth foranun controlled environment.Thise quipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>