KONAN KVC-EB70UIR HDMI 18bps Extender Over Cat5 Cat6 User Manual

KONAN KVC-EB70UIR HDMI 18bps Extender Over Cat5 Cat6 User Manual

Thank you for purchasing this product

For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Cavution

The extender using UTP termination, which follows the standard of direct interconnection method.

Advanced

The extender will start protection mode automatically when using UTP termination, which follows the standard of cross interconnection method.

Introduction

The 18Gbps HDMI Extender is a tool which can extend your HDMI signal over 230fts/70meters to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal which can be transmitted by LAN cable. It also
supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 230fts outside, also you can control the Sink in the Source side which is 230fts outside by using the HDMI Extender.

2. Features

< HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant Video resolutions up to 4K2K@50/60Hz (YUV444) 10bits HDR (High Dynamic Range) pass through
Supports HDMI High Bt Rate(HBR) audio pass through
Supports CEC bypass POC (Power Over Cable) function s supported, either TX or RXis powered by24V@1A power supply, the another does not need power supply from the
DC jack. POC Power consumption is less than 10W.
X See the description 1
< Transfer Bidirectional Infrared control signal together with the HDMI signal.
X See the description 2.
< Transfer Bidirectional RS232 control signal together with the HDMI signal.
X See the description 3.
< Transmission distance: XOver CATG cable

70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit; 40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit;
3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit. 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444)

3. Package Contents

<+ 1 xHDMI 18Gbps Transmitter <% 1xHDMI 18Gbps Receiver 4 2 x Wideband IR Tx
<4 2 x Wideband IR Rx % 1x24V/1A Power Adaptor < 1 x User Manual

Specifications

5. Operation Controls and Functions
5.1 Transmitter

1. Power LED: System power indicator.
2. DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply.
3.  HD BaseT Out: Standard HD BaseT signal output port. Connect HDBaseT receiver with a UTP cable following the standard of directinterconnection method
4. HDMI In: Connect this to HDMI source devices such as Blu-ray or PS4player
5.  IR In: Channel 2 IR Receiver. Connect with Wideband IR Rx.
6. R Out: Channel 1 IR Transmitter. Connect with Wideband IR Tx.
7.  RS-232:Phoenix jack provide Serial port control signal from receiver orto receiver.
8. Srvice: Manufacturer use only.
9.  Connection Signal Indicator Lamp
10.  llluminate: The Transmitter and Receiver are in good connections status.
11. Flashing: The Transmitter and Receiver are in poor connections status.

5.2Receiver

1. Power LED: System power indicator.

2.  DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply.

3. HD BaseT In: Standard HD BaseT signal input port. Connect HDBaseT Transmitter with a UTP cable following the standard of directinterconnection method

4. HDMI Out: HDMI output port. This slot is where you connect theHDTV or monitor with HDMI cable.

5.  IRIn: Channel 1 IR Receiver. Connect with Wideband IR Rx

6.  IROut:Channel 2 IR Transitter. Connect with Wideband IR Tx.
   RS-232:Phoenix jack provide Serial port control signal fromreceiver or to receiver.

7. Srvice:Manufacturer use only.

8. Connection Signal Indicator Lamp

9. Xllluminate: The Transmitter and Receiver are in good connections status.

10. Flashing: The Transmitter and Receiver are in poor connections status.

11. Dark: The Transmitter and Receiver are not connected.

12. Data Signal Indicator Lampllluminate: The HOMI signal with HDCP.

13. Flashing: The HDMI signal without HDCP.

14. Dark: No HDMI signal.

Description 1

OC (Power Over Cable) Application Example

Description 2

Bidirectional Infrared control Application Example

Description 3

Bidirectional RS232 control Application Example

Connection Diagram

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>