behringer RX1602 16-Input Rack Mount Analog Mixer Instructions
- June 4, 2024
- Behringer
Table of Contents
Other important information
Instructions
Important information
- Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
- Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
Specification
Audio Inputs
Type| 1/4″ TRS connector, electronically balanced
Impedance| 10 kΩ/ balanced or unbalanced
Gain range| -∞ to +15 dB
Operating level| +4 dBu/-10 dBV (switchable)
Maximum input level| +22 dBu
CMRR @ 1 kHz| Typically > 50 dB
Audio Outputs|
Main Out UR
Type| 3=1/4″ TRS connector, impedance balanced
Gain range| -00 to +15 dB
Impedance| 240 0 balanced, 120 0 unbalanced
Maximum output level| -F22 dBu
Mon Out
Type| 1/4″ TRS connector, impedance balanced, mono
Impedance| 240 Ω balanced, 120 0 unbalanced
Max. output level| +22 dBu
Phones Output
Type| 1/4″ TRS connector, stereo
Minimum load impedance| 1000
System Specifications
Bandwidth| 20 Hz – 20 kHz ±0.2 dB
Frequency range| 10 Hz – 200 kHz, ±3 dB
Signal-to-noise ratio| < -97 dB
THD| 0.003% @ +4 dBu, 1 kHz, unity gain
Crosstalk| < -70 dB
Power Supply
Switch-mode autorange power supply| 100-240 V -50/60 Hz
Power consumption| 15 W
Mains connection| Standard IEC connector
Physical
Dimensions (H x W x D)| 44 x 483 x 149 mm (1.7 x 19.0 x 5.9″)
Weight| 1.8 kg (4.0 Ibs)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>