LUTEC 7622111 Wet Location LED User Guide
- June 4, 2024
- LUTEC
Table of Contents
Model #7622111
WET LOCATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Consult a qualified electrician if you are not certain about the installation process. Always install wiring connections in accordance with local code, ordinances, and the National Electric Code.
- Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- Do not attempt to install this product while it is plugged in.
- Do not connect this light fixture to a dimmer switch or timer.
- This light fixture is designed to fit standard junction boxes as defined by the National Electrical Code.
The photocell in the fixture is designed to detect light and prevent the
fixture from turning on when it senses daylight. At dusk, the light will turn
on throughout the night until dawn. At dawn, the light will turn off
throughout the day until dusk
Note: If the fixture is installed in a shaded or covered area where there
is little direct sunlight, the light may come on during the day.
Service:
LUTEC USA LLC: 149B Houston Rd Troutman NC 28166
Ningbo UTEC Electric Co.,LTD CN8, Far East Industry Park , Yuyao, China
www.lutec.com
service@lutec.com
Please call our Customer Service line at 877-714-8669 for assistance Monday – Friday 9 a.m. to 5 p.m. EST
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>