SM Tek Group MCW9 LED MagCharge Magnetic Wireless Mount User Manual

June 13, 2024
SM Tek Group

SM Tek Group MCW9 LED MagCharge Magnetic Wireless Mount

INTRODUCTION

This high-tech mount is one of the first in its kind. With a magnetic charging system and an LED ring, it is extremely futuristic. It is extremely easy to assemble and even easier to begin to use. There is two different ways to use it as well! We included a vent clip for those who prefer a more minimalistic style to there vehicle. Always stay charged while on the go and look good doing it.

PACKAGE CONTENTS

  • 1x Magnetic Phone Holder
  • 1x Suction Cup Stand
  • 1× Metal Ring
  • 1x Vent Clip
  • 1x Charging cable

PRODUCT OVERVIEW

SM-Tek-Group-MCW9-LED-MagCharge-Magnetic-Wireless-
Mount-02

SPECIFICATIONS & FEATURES

  • Strong & Secure Suction Cup
  • Works on Any Flat Surface
  • 360° Rotating View Option
  • Type-C Input
  • Output: 5W / 7.5W / 10W / 15W
  • Adjustable arm extends to 6.5″ wide
  • Compatible withmost wireless charging devices
  • Bonus Clip
  • LED party ring
  • Hands- Free supportSM-Tek-Group-MCW9-LED-MagCharge-Magnetic-Wireless-Mount-03 SM-Tek-Group-MCW9-LED-MagCharge-Magnetic-Wireless-Mount-05

HOW TO USE

Constructing the Mount

  1. Unbox all pieces and make sure you have everything
  2. Screw joint part onto the back of the mount body but loosely
  3. Leaving it loose will allow for the ball to pop in easily
  4. Once the ball is in socket, tighten knob to make sure its tight
  5. Take plastic peel off of suction cup
  6. Place mount on dashboard, windshield, or vent in desired location
  7. Plug in mount head so the LED lights up and it can charge
  8. Attach metal ring to the back of the phone or have case with compatibility ready
  9. Place phone against middle of circle and it should magnetically adhere to it
  10. Phone should begin charging and you’re all set!

CARE AND SAFETY

  • Do not use this unit for anything other than its intended use.
  • Keep the unit away from heat source, direct sunlight, humidity, water or any other liquid.
  • Do not expose the device to extremely high or low temperatures, as it may damage the battery.
  • Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
  • Do not use the unit if it has been dropped or damaged in any way.
  • Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
  • Keep the unit out of reach of children.
  • This unit is not a toy.

BATTERY DISPOSAL:
This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

@SM TEK GROUP INC., All rights reserved.
MicroTech is a trademark of SM TEK GROUP INC.
All trade names are the registered trademarks of the manufactures listed.
New York, NY 10001 www.smtekgroup.com

Made in China

Documents / Resources

| SM Tek Group MCW9 LED MagCharge Magnetic Wireless Mount [pdf] User Manual
MCW9 LED MagCharge Magnetic Wireless Mount, MCW9, LED MagCharge Magnetic Wireless Mount, MagCharge Magnetic Wireless Mount, Magnetic Wireless Mount, Wireless Mount, Mount
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals