GAGGENAU VG425215AU Vario Gas Cooktop 400 Series Owner’s Manual
- June 13, 2024
- Gaggenau
Table of Contents
GAGGENAU VG425215AU Vario Gas Cooktop 400 Series
Product Information
Product Name: VG425215AU Vario gas cooktop 400 series
Color Variant: Stainless steel
Width: 38 cm
Installation Accessories:
- CKG420000 – Black knobs 400 series for VG 425
- CKG420010 – Stainless steel knobs 400 series for VG 425
- VA420004 – Connection strip for combination with other Vario appliances of the 400 series for flush mounting
- VA420010 – Connection strip for combination with other Vario appliances of the 400 series for surface mounting
- VA440010 – Stainless steel appliance cover with mounting strip
Consumption and Connection Features
- Total connected load gas: 20.5 MJ/h
- Total connected load electric: 15.0 W
- Connecting cable: 1.4 m with plug
Product Usage Instructions
Installation
- Ensure that the cooktop is placed on a stable and heat-resistant surface.
- Select the appropriate installation accessories based on your requirements (knobs, connection strip, appliance cover).
- If combined with other Vario appliances, use the corresponding connection strip for flush or surface mounting.
- Follow the provided installation instructions to securely install the cooktop and accessories.
Gas Connection
- Make sure the gas supply is turned off before connecting the cooktop.
- Connect the gas supply line to the designated gas inlet on the cooktop.
- Tighten the connection using a suitable wrench, ensuring a secure and leak-free connection.
- Check all connections for any gas leaks using a soapy water solution.
Electrical Connection
- Ensure that the electrical power is turned off before connecting the cooktop.
- Plug the provided connecting cable into a suitable power outlet.
- Make sure the plug is inserted fully and securely.
- Do not use any extension cords or adapters that may compromise the electrical safety of the cooktop.
Usage
- Ensure that all control knobs are in the “off” position before igniting the burners.
- Turn the desired burner knob to the desired heat level.
- Use caution when adjusting the heat levels and avoid leaving the cooktop unattended while in use.
- To turn off the burners, turn all control knobs to the “off” position.
Cleaning and Maintenance
- Allow the cooktop to cool down before cleaning.
- Clean the stainless steel surface with a soft cloth and mild detergent.
- Avoid using abrasive cleaners or scrubbing pads that may damage the surface.
- Regularly clean the burners and burner caps to ensure optimal performance.
Note: For more detailed information on installation, usage, and maintenance, refer to the complete user manual provided with the product.
Color Variants
- VG425215AU
- Stainless steel
- Width 38 cm
Required installation accessories
- CKG420000
- Black knobs 400 series for VG 425
- CKG420010
- Stainless steel knobs 400 series for VG 425
Installation Accessories
- VA420004
- Connection strip for combination with other Vario appliances of the 400 series for flush mounting
VA420010
- Connection strip for combination with other Vario appliances of the 400 series for surface mounting
VA440010
- Stainless steel appliance cover with mounting strip
VG425215AU
- Vario gas cooktop 400 series
- Stainless steel
- Width 38 cm
- Natural gas 10 mbar
Full electronic power level regulation on 12 levels Solid stainless steel knob, also selectable with black robust finishing, for precise control and personalisation Precision crafting of 3 mm stainless steel For surface mounting with a visible edge or for flush mounting Precise and reproducible flame size Automatic fast ignition, electronic flame monitoring with automatic re-ignition Simmer function for cooking on a very low output level Solid smooth-surface cast iron pan supports Can be combined perfectly with other Vario appliances of the 400 series
Cooking zones
- 1 two-ring high output burner with 14.0
- MJ/h, suitable for pots up to max. ø 28 cm.
- 1 two-ring standard output burner with
- 6.5 MJ/h, suitable for pots up to max. ø24 cm.
Handling
- Control knobs with the illuminated ring, cooking zone and output level markings.
- One-handed operation.
- Full electronic control in 12 output levels for exact power level regulation plus simmer function.
- Automatic fast ignition.
Features
- Simmer function.
- Cast iron pan support with flat, continuous pot surface.
- Brass burner ring(s).
Safety
- Electronic flame monitoring with automatic re-ignition.
- Residual heat indicator.
- Safety shut-off.
Planning notes
- Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary.
- The drawing “Installation of the control knob” must be observed if the panel is more than 23 mm thick (there must be a recess at the rear).
- If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
- The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
- Additional instructions for flush mounting:
- Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer.
SPECIFICATIONS
- Characteristics Product name/family: Vario/Domino gas hob
- Built-in / Free-standing: Built-in
- Energy input: Gas
- Total number of positions that can be used at the same time: 2
- Min. required niche size for installation(HxWxD): 134 x 360 x 492
- Width of the appliance: 380
- Dimensions (HxWxD): 158 x 380 x 520
- Dimensions of the packed product (HxWxD): 300 x 500 x 600
- Net weight: 13.5
- Gross weight: 14.9
- Residual heat indicator: separate
- Location of the control panel: External control
- Basic surface material: brushed stainless steel
- Color of surface: Stainless steel, Stainless steel
- Color of frame: Stainless steel, Stainless steel
- Length of electrical supply cord: 140
- Connection Rating: 15
- Gas connection rating: 5700
- Fuse protection: 2
- Voltage: 220-240
- Frequency: 50; 60
Included accessories
- Consumption and connection features
The groove must be continuous and even so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining. The joint width may vary due to the size tolerances of the combinations and of the worktop cut-out. If installing several appliances in individual cut-outs allow for a division bar of a minimum of 50 mm between the individual cut-outs. Special nozzles can be ordered as spare parts. Plan for an electrical connection (the appliance is not operable without a power supply). Air intake from above. No intermediate shelf is required. Rear panels and wall trims must be heat-resistant and consist of a nonflammable material. A minimum clearance of at least 150 mm from adjacent heat-sensitive furniture or contact surfaces must be observed or thermal insulation fitted. If operated next to the downdraft ventilation VL 414, the ventilation molding AA 414 is recommended to ensure maximum performance of the cooktop. With a total connected load of more than 39.6 MJ/h local regulations concerning room ventilation, room size and combination of extraction or recirculation hoods must be observed. Minimum clearance between gas cooktop(s) with more than 39.6 MJ/h (11kW) and ventilation hood 70 cm. The minimum distance between the cooktop surface and a cabinet above, out of combustible material, needs to be 70 cm. The minimum distance to ventilation above is shown at the planning hints for the individual ventilation product. The appliance can be snapped into the worktop from above. Appliance weight: approx. 13.
Connection
- Total connected load gas 20.5 MJ/h
- Total connected load electric 15.0 W.
- Connecting cable 1.4 m with plug.
VG425215AU
- Vario gas cooktop 400 series
- Stainless steel
- Width 38 cm
- Natural gas 10 mbar
DIMENSIONS
-
A: 3.5-05
6.5*0%in combinations with frameless induction hobs -
B: Fill with silicone
When installing with an appliance cover, pay attention to the deeper cut-out and the front and rear groove width. measurements in mm
Installation with appliance cover, surface mounting
Installation with appliance cover, flush mounting
View from above
- A: When installing with appliance cover, take the deeper cut-out into consideration (observe separate planning notes) measurements in mm
Longitudinal section
-
A: 3.5-05
6.5*05in combination with frameless induction hobs -
B: Fill with silicone measurements in mm
-
A: When installing with appliance cover, take the deeper cut-out into consideration (observe separate planning notes)
-
B: 3.505
6.5*95in combination with frameless induction hobs measurements in mm
VG425215AU
-
Vario gas cooktop 400 series
-
Stainless steel
-
Width 38 cm
-
Natural gas 10 mbar
-
A Moonstion to seria spare ate the repair cutout measurements in mm
Installation with appliance cover, flush mounting
Installation with appliance cover, surface mounting
Installation of the control knob; surface mounting
Installation of the control knob; flush installation
Documents / Resources
|
GAGGENAU VG425215AU Vario Gas Cooktop 400
Series
[pdf] Owner's Manual
VG425215AU Vario Gas Cooktop 400 Series, VG425215AU, Vario Gas Cooktop 400
Series, Cooktop 400 Series, 400 Series
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>