CENTURION SGT180 Compatible’ Remote Instruction Manual
- June 13, 2024
- CENTURION
Table of Contents
CENTURION SGT180 Compatible’ Remote
Product Information
The Centurion Remote Ordering Options, Art ID: SGT180, is a remote control device compatible with the following Centurion receivers: Slimfit, N3588, SDO10, SDO-21 TP/BP, RDO10, T12/S12, MPS 12, MPS12, MPS 21, DPS D12/D20, SDO-3 DC, SDO-P, SDO-1, SDO-21 DPS, SDO-21 MPS. It operates at a frequency of 433Mhz and has 4 buttons. The remote control is powered by an LR27A battery.
Product Usage Instructions
Program Remote to Receiver
- Press the Learn/Code Set button once on the receiver. (A light on the motor will illuminate.)
- Press the button on the new remote that you wish to operate the door once. (The light on the motor will extinguish.)
- Once the light stops flashing, test the new remote to ensure it is working properly.
Deleting All Remotes from the Receiver
- Press the LEARN or CODE SET button on the receiver. (LED indicator will glow solid.)
- Press and hold the black RUN button on the receiver. (LED indicator will begin to flash quickly.)
- Once the LED stops flashing, all remotes are deleted from the receiver.
Note: Please refer to the product manual for any further information or updates. We assume no liability for any errors or omissions in the information provided.
REMOTE ORDERING OPTIONS
Art ID
- SGT180
SPECIFICATIONS
Centurion
- Frequency: -433Mhz
- Buttons: – 4
- Battery: – LR27A
COMPATIBLE WITH
RECEIVER COMPATIBILITY
- Suits Models:
- Slimfit, N3588, SDO10, SDO-21 TP/BP, RDO10, T12/S12, MPS 12, MPS12, MPS 21, DPS D12/D20, SDO-3 DC, SDO-P, SDO-1, SDO-21 DPS, SDO-21 MPS
Remote Programming Steps
Program Remote to Receiver
- Press the Learn/Code Set button once. (A light on the motor will illuminate.)
- Press the button on the new remote that you wish to operate the door once. (The light on the motor will extinguish.)
- Once the light stops flashing, test the new
Deleting All Remotes from the Receiver
- Press the LEARN or CODE SET button. (LED indicator will glow solid)
- Press and hold the black RUN button (LED indicator will begin to flash quickly)
- Once the LED stops flashing all remotes are deleted
Whilst every effort has been made to ensure the accuracy of the information supplied herein, we assume no liability for any errors or omissions. Information contained in this document is subject to change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>